{glossaries} is about creating glossaries and similar lists. A popular package is `glossaries`.

learn more… | top users | synonyms

0
votes
1answer
102 views

Bug in glossaries package while using hyperref?

I compile the following code: \documentclass{scrreprt} \usepackage{blindtext} \usepackage[ bookmarks=true, bookmarksopen=true, colorlinks=true, anchorcolor=blue, filecolor=blue, ...
0
votes
1answer
84 views

Glossaries include symbol from other glossary in name

I have a glossary entry which defines a symbol \newglossaryentry{nc:line:num}{ name=cache lines, symbol=\ensuremath{\#l}, description=number of lines in cache} and want to use its ...
0
votes
1answer
2k views

Problem with \usepackage{glossaries}

\documentclass{report} \usepackage{datatool} \usepackage{glossaries} \makeglossaries \begin{document} \chapter{Hello} \section{First Section} Hello World ...
0
votes
1answer
37 views

Use of glossary for beginner

Problem : Line 11 in MKDoc.tex undefined control sequence when I pdflatex it on TS. The idx and ind files has zero bytes when I ran Makeindex on TS button In the main document MkDoc I have several ...
0
votes
1answer
21 views

Package `glossaries`: Temporarily disable `\makefirstuc` in `\glsnamefont` for specific entries with math content

I use the package glossaries and I have \renewcommand*{\glsnamefont}[1]{\makefirstuc{#1}} in my preamble as suggested in the documentation to make each entry start with an upper-case letter in the ...
0
votes
1answer
42 views

Write short description behind the document location (list of abbreviations in glossaries)

I am using the glossaries package for the list of abbreviations. By default, a location list is displayed for each entry whih refers to the document location. It look´s like this: Now I would like ...
0
votes
1answer
40 views

list environment on glossary definition doesn’t work

I try to put an inparaenum environment on a glossary definition like this : \newglossaryentry{polymo}% {% name={Lorem}, description={Lorem ipsum dolor \begin{inparaenum}[i)] \item sit ...
0
votes
1answer
97 views

How can I add in the missing space when the first use of an acronym is plural?

I'm using the glossaries package and defining my acronyms like this: \newacronym{led}{LED}{Light Emitting Diode} I'm then using the acronyms in my document with either \gls{led} or \glspl{led} ...
0
votes
1answer
64 views

Ordering Glossary in ToC before another entry

I'm having difficulties getting my glossary to show up in the right place in my table of contents. It needs to come before the Acknowledgements and be in the same font type as the List of Figures etc. ...
0
votes
1answer
48 views

Random output at the end of gloss entries

I'm getting a weird output at the end of gloss entries. When I remove that entry, all of a sudden that output seems to just be floating randomly and I cannot find the source. The input will be: ...
0
votes
1answer
105 views

glossaries and REnewglossaryentry

I haven't found anywhere and I wonder is there or would it be very hard to provide a command \REnewglossaryentry[2] for the glossaries package. Name for the desired command is kinda self explanatory, ...
0
votes
2answers
146 views

Glossaries 'unknown option' Error [closed]

In the following, I create a separate glossary that I do not want to have hyperlinked (in my actual document, the glossary without links will not be displayed). The following MWE generates an error: ...
0
votes
1answer
85 views

How to change the appearance of the display of the first use of an acronym? How to insert “short”?

How can I change the apperance of the display of the first use of an acronym? I want to change Compact Disc (CD) to Compact Disc (short CD) I tried ...
0
votes
1answer
281 views

Wrong Reference in glossary - difference shown pagenumber and reference location

As in this previous Link Problem I reproduced the error. First, this is my code: \documentclass{scrartcl} \usepackage[utf8]{inputenc} \usepackage[ bookmarks, bookmarksnumbered, ...
0
votes
1answer
2k views

How to make glossaries in output?

This is my sample script. I want to print glosssaries. I am trying to do that but nothing gets printed. I am using \documentclass[oneside,12pt]{report} \usepackage{fancyheadings} ...
0
votes
1answer
640 views

Why won't my glossaries print?

I have a look around online and at other posts however I haven't been able to find a solution to this problem. Here is the code I'm using: \documentclass[a4paper,final]{report} \usepackage{epsfig} ...
0
votes
1answer
269 views

list of definitions in appendix

I want to have appendixes containing an overview of RFC, W3C and other standards discussed in my paper. Of course I also have them in my bibliography, but the overview should look like RFC 1234 ...
0
votes
0answers
8 views

Can a missing glossary entry generate Warnings instead of Errors?

The hyperref package, when it tries to link to a label that doesn't yet exist, gives a warning but continues without making the link. Is it possible to have a similar setup with the glossaries ...
0
votes
0answers
34 views

Package glossaries causing warning

I am using MiKTeX 2.9 with TeXnicCenter. In order to adjust the space between acronyms and remove alphabetical grouping I define a new glossary style mylong. \documentclass{article} \usepackage[toc, ...
0
votes
0answers
27 views

Invisible Glossary caused by .cls style file

I'm writing my paper in ShareLatex. I have followed the instructions on inserting a Glossary. However, when I attach the style file I am ordered to use, the glossary no longer appears. I can not ...
0
votes
0answers
8 views

New glossaries group

I define a new group for the glossary list as follows: \newglossaryentry{<subscripts>}{name={\Large\textbf{\textsf{<Subscripts>}}}, description={\nopostdesc}} and add superscripts as ...
0
votes
0answers
27 views

Using glossaries without cross-referencing

I am attempting to use the glossaries package to add multiple glossaries to my thesis. Essentially I want a list of acronyms and a list of mathematical symbols. However I do not want to cross ...
0
votes
0answers
37 views

Problems with gloss package

I have been trying to make an glossary using gloss package, but anytime I get the warning no driver for entry "gd" or "gloss definition". Basically i have the next code: ...
0
votes
0answers
63 views

Glossaries: customize number lists (page numbers) attached to each acronym

I would like to exclude the Table of Contents and Glossary itself from the page numbers that appear attached to each acronym indicating the pages where the entries have been used. If this cannot be ...
0
votes
0answers
53 views

Using \glsaddallunused for customized Glossaries

This question is related to the following answer Suppress symbol in nomenclature after first use As I am using the cusmized glossaries (Thanks to @karlkoeller), the command \glsaddallunused is not ...
0
votes
0answers
35 views

Xindy cannot be executed [duplicate]

Trying to run \makeglossaries after I've already compiled the file with pdflatex gives me the error: **Call to xindy failed*** Check 'settings.glg' for details In the file 'settings.glg' this is ...
0
votes
0answers
32 views

Make glossaries contain exactly all referenced and cross-referenced keys

The documentation of the glossaries package states about the see key Note that in this case, the entry with the see key will automatically be added to the glossary, but the cross-referenced ...
0
votes
0answers
20 views

No title in glossary [duplicate]

I print the glossary on two columns. But the title 'Glossary' is printed on the first column. So I want to print title 'Glossary' in external command and the the commad \printglossary dont have to ...
0
votes
0answers
21 views

glossaries: including all items in a Glossary on TexniCenter [duplicate]

I am using the glossaries package to typeset some glossaries, on a perl+MikTeX+TexnicCenter (Windows) setup \documentclass[a4paper,11pt]{report} \usepackage[T1]{fontenc} \usepackage[latin1]{inputenc} ...
0
votes
0answers
38 views

Use both Acronym and Glossary for one term

I want to specify both the acronym meaning and the glossary description for some acronyms. For examples I need to specify what's description of API, and also what acronym mean for it. Is there a ...
0
votes
1answer
1k views

\printglossary does not produce any content [duplicate]

I am having some trouble using glossaries in LateX (TeXnicCenter) and hope someone could give me some advice. I am using the package \usepackage[toc, acronym, section=section]{glossaries} to get a ...
0
votes
0answers
176 views

Glossaries and nomencl not updating after changes

I am running pdflatex, makeglossaries, pdflatex, pdflatex to generate my PDF using TexMaker with MikTeX on Windows. The first compilation goes smoothly, all files are generated and the glossaries and ...
0
votes
0answers
86 views

memoir class glossary: \changeglossnumformat not working

I've modified memoir's glossary format in order for things to look the way I want. I'm pretty happy, except for one thing: I'd like for the page numbers to be clickable links. When the reader clicks, ...
0
votes
0answers
275 views

pdflatexmk doesn't run makeglossaries for glossaries package (TeXShop, OSX)

I'm trying to get the following document to work with a single run of pdflatexmk: (I've included my entire preamble to be sure) % !TEX TS-program = pdflatexmk ...
0
votes
1answer
152 views

Change appearance of first acronym use if it falls into a composed word

I have a acronym for GPU, and start my text with GPU-computing. For now this is the first appearance, and this results in graphic processing unit (GPU)-computing, however I would rather like it to ...
0
votes
0answers
2k views

Can't compile LaTeX document when glossaries package is used (fatal error) [closed]

I just followed the instructions for setting up TeXnicCenter to work with the glossaries package as described at latex-community.org. I am trying to create a list of acronyms, however, I will not be ...