{glossaries} is about creating glossaries and similar lists. A popular package is `glossaries`.

learn more… | top users | synonyms

7
votes
1answer
299 views

How to highlight important pages in glossaries page number list

In some books, the keywords page not only has a list of pages the keyword was referenced, it also bold or emphasize page numbers where the keyword was defined or explained. How do I do that with ...
6
votes
1answer
446 views

Is there a way to make all my \gls{} links italic

I'm using the glossaries package to define a glossary. However, I would like all \gls{} references to appear in italic. Is there any way to do this without adding \it everywhere?
6
votes
2answers
2k views

Custom glossary style: Make glossary as wide as \textwidth

WARNING: This is a follow-up question to Display long form (first-use like) entries of none acronyme type entries. As mafp suggested in the other post I went ahead and defined my own glossary-styles ...
5
votes
2answers
132 views

Display specific locations in the glossary

I use the glossary package with xindy and compile my document with lualatex. Is it possible to display specific locations in the glossary? My favoured way would be: The standard \gls{} command ...
5
votes
3answers
2k views

Glossaries: Make a glossary entry recognizable in printing

How do you make it visible to the reader that the printed word/term is an entry in the glossary? In my PDF on the computer, I just see it because I use the hyperref package and there's a red box ...
5
votes
1answer
483 views

Is it possible to automatically add an index entry each time an acronym/glossaries command is used in the document? [duplicate]

Possible Duplicate: Automatically index acronyms I am using glossaries package for acronyms (\usepackage[acronym]{glossaries}). I have a separate .tex file for a list of \newacronym{key}{label}...
5
votes
1answer
212 views

Symbol in plural form of acronym in glossaries package

Follow-up question If the plural form acronym is used first then it is printing one s after the symbol in parenthesis and this is not desired. For example, if \glspl{a} occurs first before any use of ...
4
votes
3answers
2k views

Glossaries: Print first occurence by using ACRONYM (DESC)

Is there a way to change the way how the acronyms in glossaries package are printed on the first occurence when defining them via \newacronym{cd}{CD}{compact disk}. Currently I'm using the following ...
4
votes
1answer
734 views

Formatting of heading 'Glossary" to match chapter and index heading

Earlier I asked a question to match the heading of List of Acronyms and Symbols to that of List of table (instead of chapter heading). That was solved by Nicola via Formatting of heading List of ...
3
votes
1answer
722 views

Suppress \gls links on one glossary only

I want to use \gls* automatically when invoking the \gls command. This should be done for one glossary (type=tech) only and globally. Not working: \glsdisablehyper does not work at the define level,...
3
votes
2answers
9k views

List of Acronyms is not displayed

\documentclass{report} \usepackage[acronym]{glossaries} \makeglossary \newacronym{svm}{SVM}{Support Vector Machine} \newacronym{wasn}{WASN}{Wireless Sensor Networks} \begin{document} \printglossaries \...
3
votes
1answer
230 views

The \alph counter representation has strange effects with the glossaries package

This is a follow-up question here How could glossaries' numberlabel use the manually defined number of Sections(or other Sectional Units)? A suspect BUG. The parameter \alph doesn't work fine ...
1
vote
2answers
808 views

Reset package options

\LaTeX seems to remember earlier stated options. How can I reset this? ! LaTeX Error: Option clash for package glossaries. See the LaTeX manual or LaTeX Companion for explanation. ...
12
votes
1answer
429 views

Farsi alphabet order for glossary

I am using glossaries with makeidx in a Farsi document with xepersian. Currently it sorts the output using Arabic alphabet order and places words starting with گ, چ, پ and ژ at the end of list. How ...
12
votes
1answer
471 views

Problem with “equal” sign and glossary entry definition

I am using glossaries package and I encountered a problem in the symbol field. When I define it as $m=1$ I get the following error message: ! Missing $ inserted. <inserted text> ...
11
votes
1answer
4k views

Defining plural form for glossaries entries

Based on the following answer, How shall I define plural form of glossaries? Two separate acronym list using package glossaries For example, \newglossaryentry{LED} { name={LED}, description={...
8
votes
1answer
130 views

Glossaries with more hierarchical categories

I use a lot of classic glossaries in my work: main, acronyms, abbreviations… I also use more complex glossaries for linguistic studies, with hierarchical categories. I know how to build glossaries ...
7
votes
2answers
127 views

Overfull \hbox warnings for the glossary option “style=long” when using KOMA-Script?

I always get an overfull \hbox warning when I compile a glossary with the glossaries package and the option style=long. Also the warning occurs only with KOMA-Script classes and not with the standard ...
7
votes
2answers
192 views

How to set hyperfirst to just one glossary?

This is a follow up question to here. How can I set my acronyms glossary to hyperfirst=false and the main glossary to hyperfirst=true? I tried to give that as an option to \printglossary but that ...
6
votes
1answer
1k views

How to suppress glsgroupskip on pagebreak? (glossaries package)

I'm using the 'glossaries' package to build a list of abbreviations. I have my own style defined based on a standard longtable style (to easily see what's the matter I pick the 'longheaderborder' ...
6
votes
1answer
171 views

Using permute with glossaries

There is a problem with using the package permute with glossaries. A minimal working example: (by the way a minimal working example to show how an "index of notation" can be created) \documentclass{...
5
votes
1answer
602 views

Notation table in each Chapter/Part

I am currently writing a large document (book class divided into several parts) and would like to introduce suitable notation tables at the beginning of each part of the document. Up to now I have ...
5
votes
1answer
2k views

Why Glossaries with Xindy unable to execute(cannot find the correct PATH)?

After I compiled a tex file by xelatex, I use Glosarries with Xindy to make a index, it reported: $ makeglossaries test makeglossaries version 2.04 (2012-05-19) added glossary type 'main' (glg,...
5
votes
2answers
376 views

Avoiding double dots in glossaries package

I would like to incorporate the suggested solution by Herbert, that can be found HERE, within certain glossary records. Consider the following example: \documentclass[a4paper]{book} \usepackage{...
5
votes
1answer
1k views

Compile sequence: citing in the glossary

I'm trying to add a reference to a source in my bibtex bibliography in one of my glossary entries. However, it remains a questionmark! When I compile two times in a row, it works fine, though. My ...
5
votes
1answer
130 views

Suppress link in first use of glossary entry

I'm trying to disable links in the first use of glossary entries. I've seen a number of questions asked regarding the formatting of first uses, e.g. here and here, and another question dealing with ...
5
votes
1answer
79 views

Am I over exerting the glossaries package?

As per the MWE below, I am using the glossaries package to handle the automation of values being inserted into text. This is useful when trends and discussions/conclusions don't change but values ...
5
votes
1answer
620 views

Use of longplural, shortplural in CustomAcronymFields

I'd like to have the first occurrence of my acronyms in emphasized style. So, I redefined CustomAcronymFields and use SetCustomStyle, as suggested by the FAQ. This worked til I needed a special ...
4
votes
1answer
276 views

Makeindex warning

During \makeglossaries run I get warning: Process started: makeglossaries "settings" makeglossaries version 2.12 (2014-01-20) added glossary type 'main' (glg,gls,glo) makeindex -s "...
4
votes
1answer
85 views

-ing endings (participle) on acronyms using the glossaries package

I have been trying to get participle endings on acronyms using glossaries, have so far managed to get the ending right using the procedure pasted from the users guide: \documentclass[12pt, ...
4
votes
2answers
288 views

Using bi-lingual entries with the glossaries package

I'm writing my PhD thesis in my mother language (Slovene). I would like to create a Glossary that would contain the slovene versions of the terms along with their english counterparts. The ...
4
votes
1answer
108 views

Package doc and glossaries together cause problem

If I comment out \RecordChanges below it compiles and works, otherwise I get: Package glossaries Warning: No file defined for glossary `[' on input line 13. ! Extra \endcsname. \@@do@wrglossary ....
4
votes
1answer
5k views

Errors when using glossaries package

I am compiling a .tex file with TeXmaker, but it's still generating errors. In fact, I use the glossaries package but when I add a newglossaryentry, the compilation ends with errors. This is my code ...
4
votes
1answer
93 views

test if a listings or glossaries style is valid

I want to test in my template if a call of \lstinputlisting[style=mystyle,... or \printglossary[style=mystyle,... is valid or will fail because of an unkown style. However I could no find out ...
4
votes
1answer
3k views

Glossary term list width

I am using glossaries package in my document and I have some long term names. This breaks my layout. I tried to apply: \setlength{\glspagelistwidth}{0.3\linewidth} And it did not work at all. If I ...
4
votes
1answer
2k views

Glossary with TexMaker

I'm trying to create a glossary using TexMaker on Mac OS X. TexMaker does not provide an entry called 'makeglossary' or the like in Preferences > Quick Build > Wizard. My build settings in the Wizard ...
4
votes
1answer
846 views

Dotted line between glossary description and page number

Is it possible to have the standard glossary entry, but with page numbers aligned to the right and a dotted line between the end of the description and the first page number?
4
votes
2answers
3k views

printglossaries, makeglossaries: (0 entries accepted, 0 rejected)

I'm trying to create a glossary for my document but am having trouble getting it to show up. The last three lines of my document are: \newpage \printglossaries \end{document} I've also got: \...
4
votes
1answer
325 views

How not to expand acronym in ToC or section title

I want just the opposite to this post. Actually the idea is that in ToC, sections, chapters, etc titles the acronym is not expanded. But then the first time it is used in the text it should be ...
4
votes
1answer
2k views

Two separate acronym list using package glossaries

I want to create two separate acronym list. One with 3 columns and the other with four columns. I have defined the two styles for the two types of acronym list, style1 and style2. I have my acronym ...
4
votes
1answer
451 views

Classicthesis conflicts with glossaries

The following command in classicthesis gives an error when using glossaries \renewcommand{\descriptionlabel}[1]{\hspace*{\labelsep}\spacedlowsmallcaps{#1}} giving the following result in the ...
4
votes
1answer
58 views

Language switch for glossaries acronyms

I use the glossaries package for acronyms of different languages. The problem I face now is that when my main text is e.g. german and I have an english acronym used for the first time within the text ...
4
votes
1answer
1k views

Glossaries Capitalize Every First Letter

How can I get the \Gls{...} command to capitalize the first letter of EACH word, not just the first word? \documentclass[a4paper,12pt]{article} \usepackage{glossaries} \newacronym{tla}{TLA}{three ...
3
votes
1answer
269 views

glossaries and phantom

I am trying to align my symbols in a glossary with \phantom. However when I try to do so, I get the following error (line 10 is the line where the definition of nc:line:num ends(closing brace)): ! ...
3
votes
1answer
194 views

Questions regarding conversion from acronym package to glossaries

In my thesis I use the acronym package. I have only one problem with the package, which is the lack of capability to capitalize first letter, a functionality which I read is provided by \makefirstuc ...
3
votes
0answers
384 views

Why didn't \printnoidxglossaries print anything with \cite{} in document? [closed]

I have both glossaries and bibliography in my report. I used \printnoidxglossaries but it won't show up because of \cite{} in my report.. When I removed \cite{} then \printnoidxglossaries will show up....
3
votes
2answers
371 views

Formated text in acronym sorted alphabetically in Index

I am using glossaries package with the acronym option \usepackage[acronym,toc,shortcuts]{glossaries}. An answer provided previously (Acronyms only shown in Index when used twice) works perfectly for ...
3
votes
1answer
78 views

How to add a tex specific area after the nomenclature title starts?

I'd like to write a text (and also a small table) directly after the title nomenclature (in my version: Glossar) and directly before the beginning of the nomenclature glossar list. %% LyX 2.1.0 ...
3
votes
1answer
96 views

Make \leaders repeat a string at least a given number of times

Using the glossaries and glossary-longragged packages (In a memoir document) as well as a custom style I found by Googling: \newglossarystyle{dottedlocations}{% \glossarystyle{list}% \...
3
votes
1answer
304 views

Converting a Nomenclature Example to Use Glossaries

I am hoping to get pointers for how to convert this example to use the glossaries package: How to achieve nomenclature entries like: symbol, Description, Dimension and unit, etc? The aforementioned ...