{hyperref} is a package capable of producing hypertext links in documents. If your question is about cross-referencing in general, choose {cross-referencing}. If it's specifically about PDF features, consider to choose {pdf}.

learn more… | top users | synonyms

10
votes
1answer
905 views

Specific colour in equation links

In hyperref package, is it possible to specify a specific color for equation links different than other link colors ? Following are present color specifications that I am using for hyperref package ...
10
votes
1answer
451 views

extra “]” displayed when using htlatex in TL 2013 with \usepackage{hyperref}

I noticed I am getting a new char displayed on the HTML page which did not exist when I was using TL 2012 with htlatex. I narrowed it down to including \usepackage{hyperref} This extra "]" shows only ...
10
votes
1answer
738 views

Italic index entries have no link in PDF

I have a problem when adding index entries. When I use just the vanilla \index{...}, the generated PDF contains links on the page numbers in the index. But when using \index{...|textit} to mark index ...
10
votes
2answers
4k views

Hyperref not jumping to the appropriate location [duplicate]

Possible Duplicate: href to an image label - how to jump to the image instead of the caption below the image? It appears that the links to the figures take the cursor to the figure label, ...
10
votes
1answer
10k views

How to make \ref references include the word 'Figure'? [duplicate]

Possible Duplicate: Table, Figure, and Listing prefixes Automatically inserting “Section, Subsection, etc” I'm using the package hyperref. When referencing my figure, I ...
10
votes
1answer
502 views

How do I add accented characters to PDF info without using hyperref?

Using pdflatex, I'm looking to add PDF information into by document, including an accented name (Rónán Daly). Normally I'd use hyperref to do this; however, the conference I'm submitting to is ...
10
votes
2answers
1k views

Is it possible to have back references after each chapter with a single main.bib file?

I'm using LaTeX + BibTeX to write my dissertation. I have one separate .tex file for each chapter. And I'll generate one bibliography for each chapter. But all the references are from the same file ...
10
votes
1answer
654 views

Create a footnote in node in a tikzpicture

I would like to add a footnote to a node in a TikZ picture, but every solution I could imagine fails. I tried using a minipage, too. \documentclass[a4paper,10pt]{scrartcl} \usepackage{tikz} ...
10
votes
2answers
410 views

Generate large document by pdfTeX, then break result into many PDF files while preserving links

This is the PDF file of a book I wrote: http://www.abstractmath.org/Handbook/handbook.pdf It takes a long time to download because it is a big file. I generated it using pdfLaTeX. Is there a way to ...
10
votes
1answer
457 views

Vertical position after navigating to hyperref hypertargets from hyperlinks seems too low

The vertical scroll position after navigating to a \hypertarget from a \hyperlink (described in the hyperref manual) seems to be too low. The scroll position is at the baseline of the \hypertarget, so ...
10
votes
1answer
1k views

titlesec, hyperref, algorithm2e, and \appendix

When I use titlesec, hyperref, and algorithm2e together, sections after an \appendix are not numbered properly. \documentclass{article} \usepackage{titlesec} \usepackage{hyperref} ...
10
votes
2answers
147 views

Correct kerning of hyperlinks in math mode

I use hyperlinks in math mode to if a reader does not read my thesis sequentially and finds a very arcane symbol somewhere, he may just click it and go to where it is defined. However, adding links ...
10
votes
1answer
172 views

Refer to labels of merged pdfs?

Do I need to use an extra program (pax) in order to bookmark labels of merged pdfs? For my application, I use KOMA-Script for the letter and moderncv for the CV. Therefore, I have to use two ...
10
votes
1answer
827 views

hyperlinks in biblatex

I'm making a biblatex style to solve an issue with the standard styles: if you have a reference with a doi field, it just prints the DOI number, with a clickable link if hyperref is enabled. But a ...
9
votes
3answers
1k views

Incompatibilities of cmap with fontenc/hyperref?

The following code doesn't compile (with pdflatex) \documentclass{article} \usepackage{cmap} \usepackage[T1]{fontenc} \usepackage[pdfa=true]{hyperref} \begin{document} Hello. \end{document} ...
9
votes
2answers
3k views

How do I get rid of particular pdftex warning message?

Here is a minimal example that showcases my problem: \documentclass{article} \usepackage{amsthm} \usepackage{hyperref} \usepackage{cleveref} \newtheorem{thm}{Theorem} \newtheorem{lem}[thm]{Lemma} ...
9
votes
3answers
655 views

Hyperref using the wrong language script for \url?

In a mixed language document, I try to use a URL. Here is minimal input demonstrating \documentclass{article} % compile with xelatex \usepackage{hyperref} \usepackage{polyglossia} ...
9
votes
2answers
267 views

babel + hyperref: »redefining shorthand« several times per page

consider the following code: \documentclass{article} \usepackage[ngerman]{babel} \usepackage{hyperref} \usepackage{blindtext} \begin{document} \Blindtext\Blindtext\Blindtext ...
9
votes
3answers
3k views

Unable to link to inserted pages with pdfpages

I would like to add labels to pages inserted with the pdfpages package. I sort of works right now, but it is not possible to link to the labels with \ref and \pageref commands. But it is possible to ...
9
votes
2answers
388 views

How to strip “eq.” from cleveref?

How can I make cleveref output (1) instead of eq. (1) when referencing equations only?
9
votes
2answers
5k views

Beamer, page/frame numbers, buttons and Appendix slides

I am using beamer and I have a slide in an Appendix section. I hyper-reference it with a button. The Appendix does not appear as a section itself. The Appendix material is at the end of the code. I ...
9
votes
2answers
1k views

hyperref Warning: Draft mode on

I'm trying to get hyperref to work with pdflatex, but I'm getting the error hyperref Warning: Draft mode on and since all hyperrefs are disabled in draft mode, there are no links being created. I ...
9
votes
2answers
3k views

How to link Table of Contents in thesis PDF

I used the following code and I am able to link references, List of Symbols but unable to link the Table of Contents in my thesis. I wish a completely linked PDF of my thesis. Please help me.... ...
9
votes
2answers
256 views

Key Value option in package

I trying to write a package, and I'd like to specify whether there should be colour or not. I'd like to do: \usepackage[color=false]{foo} and have this set \RequirePackage[color=false]{hyperref} ...
9
votes
3answers
296 views

Hyperref is loaded by the class, and I need to load packages that are supposed to be loaded before

I am using the lipics documentclass, which loads hyperref. Since I want my figures boxed, I added the following \usepackage{float} \floatstyle{boxed} \restylefloat{figure} The problem: I receive ...
9
votes
2answers
2k views

Using \href instead of \ref

The link produced by \ref{defn:First Defined Term} works fine, but as I would prefer to have text instead of a number so thought \href{defn:First Defined Term}{First Defined Term} should work, but it ...
9
votes
3answers
1k views

Hyperref “enquotes” metadata

EDIT: As Bill B. and Caramdir point out in their comments after Bill B. produced his results posted below, more information is needed in order to make a better call. To remedy, my output was ...
9
votes
2answers
221 views

nameref (hyperref) evaluating counter instead of section name

What's the proper way to reference a section with a counter in the title? The TOC generates correctly, but the cross references aren't so lucky. MWE: \documentclass[letterpaper, 12pt, twoside]{exam} ...
9
votes
3answers
226 views

Locally bypassing hyperref

I want to make the hyperref package skip some \ref commands in my TeX file and not make them hyperlinks in the resulting pdf document. Is there a simple way to achieve this? Here is an example ...
9
votes
1answer
780 views

Why doesn't \renewcommand{\ref}{\autoref} change \ref into \autoref?

First off, I'm very grateful of the help this community has provided me so far. Anyway, to my problem: I feel like I'm missing something obvious here. I want... \documentclass{article} ...
9
votes
2answers
314 views

How to refer back to a point in the document with custom counters?

The easiest way to explain what I would like to have is to show the desired output and I would like to get this by writing something like: \begin{document} Draw point B \STEP{drawb}. Connect A and ...
9
votes
2answers
773 views

Why does manually loading hyperref change the font size for captions in Tufte documents?

I'm using Tufte document classes and need to manually load hyperref rather than have it loaded by the Tufte class. So I'm using the nohyper option with the document class, and later use ...
9
votes
2answers
1k views

Make Chapter Titles link to Table of Contents

I'm using the hyperref package to create hyperlinks in my document. The links from the TOC->chapters/sections work great, but I was wondering if there was a way to automatically insert hyperlinks from ...
9
votes
1answer
965 views

Avoiding inelegant splits on URLs

I am using biber and biblatex to process my bibliography. URLs are handled with breaklinks=true under hyperref. I have found an inelegant breakup of a hyperlink resulting in a reference like this ...
9
votes
1answer
1k views

Selected references without hyperlink

When using the hyperref package, is it possible to tell LaTeX not to create a link for some references? In my case the page number is displayed in the footer in \fancyhf[FC]{\thepage\ of ...
9
votes
1answer
398 views

hyperref token not allowed warning, possible bug?

I currently am using the hyperref package and I'm currently getting a lot of error messages. Currently all of the chapter and section titles give this same error. I decided to try make a minimum ...
9
votes
2answers
1k views

Using \hyperlink to link text to page with an implicit page anchor not known in advance

hyperref provides the command \hyperlink, with syntax: \hyperlink{name}{text} where name is the name of a hypertext object, and text is used as the link to jump to the defined mark. Page anchors, ...
9
votes
2answers
347 views

how to put \neq in bookmark

The not equal sign ($\neq$) becomes equal sign(=) in hyperref's bookmark. I know that \texorpdfstring will work for this, but I can not find \textneq, maybe another name? Thanks in advance.
9
votes
2answers
1k views

How can I add Section numbering and a Contents entry to the PDF bookmarks?

I'm having a bit of trouble with the PDF bookmarks. I am trying to Add "Contents" as an entry to the PDF bookmarking. Have numbering for my sections and subsections. I am looking to achieve ...
9
votes
1answer
2k views

Change colour of boxes surrounding links in hyperref

How can I achieve in the following MWE that the box surrounding the link gets coloured in blue? \documentclass{article} \usepackage{color} \usepackage[linkcolor=blue]{hyperref} \begin{document} ...
9
votes
1answer
2k views

How to change the color of the hyperlink to mail address in moderncv class?

I am beginner in LaTeX, and experimenting with moderncv. I find that the hyperkink of the email is of the same light blue color as the surrounding info, failing to make clear that it is an hyperlink. ...
9
votes
2answers
985 views

autoref names messed up when defining certain ntheorem theoremstyles

I define a theorem style pretty innocuously, to get things looking a bit more like amsthm theorems. But - my \autoref{}s become messed up with optional arguments of theorem environments. ...
9
votes
2answers
4k views

PDF hyperlinks to a given page.

I would like a command that takes two arguments: a page number and a block of text. I would like the command to create a PDF hyperlink around the text that will jump to the given page. I see that ...
9
votes
1answer
590 views

How to generate a “named destination” in PDF?

According to the Evince help, one can open a PDF at the location of a "named destination": SYNTAX evince [--help] [--page-label=PAGE | --page-index=NUM‐ BER | --named-dest=DEST] ...
9
votes
1answer
3k views

Package hyperref Warning: Token not allowed in a PDF string [duplicate]

My document contains section titles that are formatted by the listings package. (The section names are names of configure script switches.) ...
9
votes
1answer
1k views

Selectively turn off hyperref links for citations

I'm using both the natbib and the hyperref packages. I would like to be able to selectively not generate hyperlinks for some of the in-text citations. I know that I can use the asterisk with ...
9
votes
1answer
8k views

Hyperref, Table of Contents and subsections

I have encountered a problem in latex that I have not been able to solve. While the hyperref package generates clickable links in the table of contents, it does not link any subsection to the actual ...
9
votes
1answer
563 views

Possible incompatibility between biblatex and hyperref's pdfmark?

I am trying to use biblatex's \citetitle inside a \pdfmark so that the title of a citation pops up as a tooltip in PDFs. Code looks like this: %% A tooltip macro using pdfmark \newcounter{tooltip} ...
9
votes
2answers
601 views

Different hierarchical levels in TOC and hyperref-generated PDF bookmarks

I would like to make hyperref generate bookmarks for all available hierarchical levels of my documents, but only in the produced PDF. For the TOC itself (i.e. the one printed at the beginning of the ...
9
votes
3answers
480 views

Extended reference for enumerate item using parent environment

I want to reference an item of an enumerate list by it's normal label, if we are still in that same enumeration and by an parent.item syntax if we are somewhere else in the document. For example: ...