{ieeetran} is a document class for IEEE Transactions journals and conferences.

learn more… | top users | synonyms

0
votes
2answers
195 views

Table merging with two columns and text in IEEE conference latex format

1: ht*emphasized text*tp://i.stack.imgur.com/MP5IU.png Dear Sir or madam, The table i created in ieee latex template is being fixed to one column, its extending for the entire width. Please help. ...
0
votes
0answers
15 views

BibTeX generating “\BIBentryALTinterwordspacing ------” in BBL file using IEEEtran.bst [duplicate]

I'm writing up a LaTeX document in TeXnicCenter, using MikTeX as an interpreter and JafRef to write my .bib file. I've downloaded and specified the latest copy of IEEEtran.bst, and while most of my ...
2
votes
1answer
78 views

Two rotated tables in one page

I'm writing a paper using the IEEEtran style, which uses two column per page. At some point, I had to make some two big tables, so I used \sideways to rotate them. The pages' height fill all ...
2
votes
0answers
136 views

Placing a figure that occupies 2 columns [closed]

Thanks for reading my thread. I have a two-columned IEEE format journal latex, and I want to insert a wide figure. Here is my code \begin{figure*}[ht!] \centering \begin{overpic}{profiles.eps} ...
1
vote
0answers
79 views

Importing a Bib file in IEEE Trans [duplicate]

Can I import a my bib file IEEE Trans by simply typing between the \begin{thebibliography} and \end{thebibliography} tags \input{./Master.bib} or am I forced to use this style as suggested in IEEE ...
1
vote
0answers
333 views

Figure spanning two columns in IEEE Trans template?

I am using IEEE Transactions template for a paper. The problem I am facing is that I have a figure that I want to span two columns instead of a single one. Is there a way to do it?
2
votes
0answers
89 views

Citing Arxiv manuscripts in IEEEtran bibtex

I would like to learn to cite arXiv documents properly in LaTeX IEEEtran style. Biblatex has special entries for arXiv, but the standard bibtex, as well as IEEEtran Bibtex style that I am using, do ...
3
votes
1answer
790 views

Command \labelindent already defined

Using the IEEE latex sample, whenever I add "enumitem" package as below \documentclass[conference]{IEEEtran} \hyphenation{op-tical net-works semi-conduc-tor} \usepackage{enumitem} \begin{document} ...
2
votes
2answers
512 views

Changing font size of captions in figures

I'm using IEEEtran class for my conference publication in latex. The guideline says that the captions for figures should be in font size 8. I tried all these methods mentioned in this forum but none ...
1
vote
2answers
87 views

writing the details about variables of a equation (math) in IEEEtran

I think that this is a very basic question but i couldn't find any answer. I have written the following equation in latex: \begin{equation} U= \frac{\bar{X}_1 ...
2
votes
1answer
67 views

Uneven spacing in IEEE bibliography entries!

I am writing a IEEE journal article, the entire reference file is done in JabTex and all the entries seem pretty alright. I am referring to around 200+ papers. However when I build the file the first ...
0
votes
1answer
21 views

Reference is not getting displayed

I have kept my references in a refer.bib file. My file looks like following: @ARTICLE{seya12, author={Y. Seya and S. Mori}, journal={Atten Percept Psychophys (2012) }, title={Spatial attention and ...
1
vote
0answers
62 views

Getting rid of tilde in “Fig.~1” [closed]

When I use IEEEtran package like below script, figure names contain a tilde. Is there a way to remove them or IEEE conventions dictate something like that? \documentclass[conference]{IEEEtran} ...
2
votes
1answer
259 views

“Bookmarks are not allowed. See EDAS FAQ.” help [closed]

I have read all other questions with the same tags, and none of them solves my problem. I know this is a common problem, but I am not able to find the problem. Here is the preamble of my paper. ...
1
vote
1answer
59 views

Latex bibliography with mixed entry styles

I'm writing a PhD thesis with \bibliographystyle{IEEEtran} I would like to highlight the papers written by me by using, only for them, a different bibliography style as in the following example: ...
2
votes
1answer
5k views

LaTeX Warning: Citation undefined

Sample running code: \documentclass[a4paper,11pt]{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage{lmodern} \usepackage[hidelinks]{hyperref} % Hyperref package for url's and ...
2
votes
1answer
158 views

How to bring the journal name at the top in IEEEtran?

I am new to Latex. At the top of my paper, i want to bring the name of conference/journal. I don't know what should i call it..i have already tried to use header but header is something different. i ...
1
vote
0answers
17 views

Read references from a .bib file in IEEEtran [duplicate]

I am new to Latex. I am trying to put the references as well as cite them. I am doing the following: 1. Created a refer.bib file with following content @String{j = {Journal}} @String{jof = {Journal ...
1
vote
0answers
47 views

IEEEtran command list along with example?

I am new to Latex and have started to write a paper in IEEEtran format. But i don't know which command to be used for which purpose. So, anybody could suggest me a link where i can get a complete ...
5
votes
1answer
284 views

Table caption in uppercase. I don't know why

\documentclass{IEEEtran} \begin{document} \begin{table}[ht] \centering \begin{tabular}{|l|c|} \hline \multicolumn{2}{|c|}{Default Parameters} \\ \hline ...
2
votes
1answer
154 views

How to disable indentation in subsubsection using IEEEtran?

I am using IEEEtran and my sub subsections are indented. I tried using \parindent0pt but that removes the indentation of the paragraphs too. Any suggestion?
5
votes
1answer
59 views

IEEEeqnarray hyperlinks to a group of subnumbered equations

When I use IEEEeqnarray subnumbering and the hyperref package, hyperrefs to the subnumbered equations work fine; but if I try to reference the group of equations, the label is not found. Example ...
1
vote
2answers
447 views

How to reduce space after authors block? (ieeetran)

I'm using \documentclass[10pt, conference, compsocconf, letterpaper]{IEEEtran}. How can I reduce the space between the authors block (with their affiliations) and the text? Right now I have: Paper ...
3
votes
1answer
175 views

Multiple authors, with multiple affiliations

I have a paper with 3 authors, affiliated to 3 institutions, and it's supposed to abide to the IEEEtran format. Author A is affiliated to X and Z, Author B is affiliated to X, and Author C is ...
1
vote
1answer
57 views

Getting an error “file not found” [closed]

I am completely new to Latex. I have been trying to create a paper based upon IEEEtran. But when i tried to see the output after writing just 4 lines, i got an error "file not found". I have already ...
1
vote
1answer
493 views

Header and footer in IEEEtran

How to do this in IEEEtran conference format: Add a header on first page of the paper as ,conference name Add a footer on first page of the paper , notice Add a footer on rest of the pages of ...
1
vote
1answer
451 views

IEEEtran: centering (double-column) figure captions

I'm looking for a method to center the figure captions in single- and double-column mode. Here is my code \documentclass[journal]{IEEEtran} \usepackage[caption=false]{subfig} ...
2
votes
1answer
828 views

! Incomplete \iffalse; all text was ignored after line 22. In \IEEEauthorblockN

I get the error ! Incomplete \iffalse; all text was ignored after line 22. In \IEEEauthorblockN Here's a MWE \documentclass[conference,10pt]{IEEEtran} \usepackage[affil-it]{authblk} ...
3
votes
1answer
275 views

Limiting the number of authors in the references with IEEEtran

I'm trying to limit the number of authors that appear in the references by putting "et al." when their number is equal or greater than 3. According to the documentation (in page 8), you have to ...
4
votes
1answer
248 views

Final linebreak in lstlisting, and linebreak in captions (with IEEEtran)

Using: lstlisting in two columns How to add line break to caption without using caption package ... I got to the following MWE: % \documentclass[12pt,a4paper]{article} ...
2
votes
1answer
347 views

Figure* on first page in IEEEtran template

Is it possible to place a figure* (two column figure) on the bottom of the first page of a document? I'm writing an IEEEtran journal. A figure* is always placed on the next page, so it is not ...
5
votes
1answer
94 views

\thanks in IEEEtran adds an extra page

When I use "\thanks" in IEEEtran, an extra page including a "1" at the top left corner appears before the first page. Here is a MWE: \documentclass[english]{IEEEtran} \usepackage[T1]{fontenc} ...
1
vote
1answer
153 views

Author not showing with IEEEtran and natbib

I am using a template for a conference. See file icmcsmc2014.sty. They define IEEEtran as bibtex environment. Now I really want to display the name of the author on some citations. Normally I would ...
3
votes
2answers
192 views

Setting up Acronym on IEEEtran Class Documemt

I am looking for a way to setup acronym list such that, on first reference the full name will be listed and the acronym in brackets. From thereon, future reference to the acronym will only give the ...
2
votes
1answer
76 views

Section{references} not appearing correctly over bibliography

I am using the tex style of SMC. Above my reference, this appears: 6. * References This instead of "6. References". I am using their style and printing the bibliography with: ...
5
votes
2answers
1k views

Can't place figures side by side

I'm trying to place two TiKz pictures side by side in a two-column document (IEEEtrans style). I've looked at various solutions, but each one that claims to place figures side by side only manages to ...
1
vote
1answer
2k views

Multiple Authors with common affiliations in IEEEtran conference template

I have a paper where I have 4 different authors with a common affiliation. I would like to mention there names and then a single affiliation followed by individual mail addresses. I have included the ...
0
votes
0answers
75 views

prevent page break while returning to twocolumn

I'm writing a IEEE conference paper. The format of paper is \documentclass[conference]{IEEEtran} For inserting a wide image i switched to one column using \onecolumn The image took half of my page. ...
3
votes
2answers
162 views

Enumerate package wont allow to change format

I have a [journal]{IEEEtran} document (I just don't want to change the document type). I have had lots of problems, like: I cannot manage to enumerate even pages to the left and odd pages to the ...
3
votes
1answer
260 views

IEEEtran conference with \maketitle - copyright notice (in a box with borders) at bottom of first page?

Searching for a way to add copyright statement into IEEEtran conference document I came across How to add copyright notice (in a box with borders) at bottom of first page? which concerns exactly my ...
1
vote
0answers
581 views

IEEE template and caption=false option for subcaption package?

According to the IEEE transactions information (tar file here contains IEEEtran_HOWTO.pdf along with the class files) Axel Sommerfeldt’s modern and actively maintained subcaption.sty package [23] ...
0
votes
1answer
2k views

Placing a two-column figure using IEEEtran class

I have problems to get a two-column figure on the desired page. I'm using the IEEEtran class. here my minimal code: \documentclass[conference]{IEEEtran} \usepackage{cite} ...
6
votes
1answer
134 views

Tables are not compiling using IEEEtran class

I'm writing a paper using the IEEEtran class (conference mode) and the compiler even get stuck for the simple example table one can find in the manual. Here is the almost minimal example: ...
4
votes
1answer
338 views

IEEEtran not showing book title for @inbook or @incollection entry

For some reason my bibliography is not showing the title of the book for my INBOOK entry. I am trying to use crossref to cross reference the book, but the bibliography only shows the chapter title. ...
1
vote
0answers
36 views

References displayed as“?” [duplicate]

I am creating a IEEE paper, but all my references are displayed as [?]. Why is that? What can I do to get the references properly typeset? Here is my code: ...
5
votes
1answer
314 views

IEEE latex template. How to fit a figure with tikzpicture in one coulumn?

I'm using IEEE Conference Latex template. I want to have a figure with tikzpicture. My figure is not an image, is a box (rectangle) with some text inside of that. This is my code: \begin{figure}[t] ...
1
vote
0answers
160 views

Citing a url with bibtex using \url does not show url [closed]

I am using BibTeX with ieeetran.bst to format my bibliography and I would like to cite a URL. Initially I tried using the following code: @electronic{Nobelprize.org2009, Author = ...
3
votes
2answers
182 views

Figure not being typeset properly

I'm writing a report with using the IEEE Transactions template, and the template itself includes an example figure: \begin{figure}[htbp] \begin{centering} \textsf{A single column figure goes here} ...
1
vote
1answer
129 views

IEEEeqnarray: \tag-like command?

Is there a IEEEtrantools command equivalent to amsmath's \tag? Example: Consider the well-known functor laws: \begin{IEEEeqnarray}{rCl} F(f \circ g) &=& F(f) \circ F(g) \tag{Fu1} \\ F(id) ...
1
vote
0answers
18 views

One column white space in double column? [duplicate]

I am writing in a double-column template (IEEE Conference Template). What has been bothering me is that once I have a figure/pseudocode/tikz in one column, sometimes it pushes the contents in the ...