{ieeetran} is a document class for IEEE Transactions journals and conferences.

learn more… | top users | synonyms

1
vote
0answers
115 views

Squeezing a paper into a page limit - with IEEEtran

I'm working on this draft for a submission to some conference which - woe is me - uses IEEEtran. I could rant about that class for days, but never mind right now... the point is, I need to squeeze ...
2
votes
1answer
79 views

How to change the sans serif font used by IEEEtran document class

The sans serif fonts used by article and IEEEtran document classes clearly differ. Below are two MWEs and corresponding outputs. \documentclass[10pt]{article} \begin{document} \textsf{The quick ...
3
votes
1answer
146 views

Subsubsection numbering in IEEEtran Computer Society Journals template bleeds into text

I'm using a modified IEEEtran class with the template for Computer Society Journals (found here). When I produce a PDF of the basic demo (using Texmaker), I noticed that the numbering for ...
1
vote
0answers
27 views

Decreasing label separator width in IEEETran format

I'm using IEEE Transactions Latex format (conference). Below is an MWE where it can be seen that the distance between bullets and item texts are too wide to be decent. Can it be reduced somehow? ...
2
votes
1answer
184 views

IEEEtran Tabular Won't Fit Into 0.7in Margin

Using IEEEtran, I am trying to combine two tabulars in a single double-width table* environment. (This is the only way I could figure out to correctly order the tables in the paper, otherwise LaTeX ...
1
vote
0answers
98 views

Author name not showing when using IEEEtran bib style

If I use the IEEEtran bibstyle with the default Bibtex \bibliographystyle{IEEEtran} the bib entry below gets listed in the references section without author name. @Article{simon_comments_1952, ...
2
votes
1answer
43 views

To get “et al” in the text when a reference is cited with natbib and IEEEtranN

I have loaded \usepackage[round, sort]{natbib} and \bibliographystyle{IEEEtranN} my .bib is: @misc{kinaSUR, author = "{Barnett, S., Etchells, D., Weidelich, Z. and Tomkins,M}", title = ...
2
votes
1answer
95 views

bound width of a single lstlisting to one column inside a two column IEEE template

I use IEEE double column template and inside it I add a C++ code. I expect the code to be bounded within a single column however it infringes to the next column. How to fix this code? I would avoid ...
0
votes
0answers
68 views

IEEE template shows the wide figure in the middle instead of top

I expect this code to show me a figure on top of the next page: \begin{figure*}[t!] \centering \includegraphics[width=\textwidth]{tiger} \caption{caption} \end{figure*} I tested it and it works ...
3
votes
2answers
116 views

How to tell bibtex to ignore the citations in the abstract when numbering the references?

I use the IEEEtran bibliography style for my article. By default, the first-cited reference cited in the document is numbered as [1], the second one as [2], and so on. This seems to be IEEE's ...
0
votes
0answers
52 views

Inserting a double column picture in bottom of IEEETran first page

I'm trying to add a double column width picture at the bottom of the first page of an IEEEtran class. What I have right now is something like that. \documentclass[conference]{IEEEtran} ...
0
votes
0answers
78 views

double column wrapfigure

I tried many different ways of solving this problem. I am getting really desperate. I am new to TeX and I am using overleaf in my browser as my LaTeX tool. My document is in the ieeetran journal ...
1
vote
2answers
189 views

Placing a figure in the bottom of a page spanning the two columns of an IEEE document

I am writing an IEEEtran article. I use graphicx for inserting .pdf images. Normally, LaTeX selects a position like A. I want LaTeX automatically find and insert the image to a position like B. How ...
2
votes
2answers
73 views

Conference title

How can I ​add the conference title, date and venue only to the upper right-hand corner of the first page (title page) of your source document of IEEE conference paper in font size 9pt? It looks like ...
1
vote
0answers
8 views

IEEEtran-compsoc class messes up “description” [duplicate]

I'm using the template %% bare_jrnl_compsoc.tex %% V1.3 %% 2007/01/11 %% by Michael Shell %% See: %% http://www.michaelshell.org/ %% for current contact information. which can be downloaded from ...
2
votes
0answers
168 views

problem running document with IEEEtran class

I have installed miktex and winedt on my laptop. when I am trying to compile my files the below errors are appeared. Basically, I am sure that there is nothing wrong with my files since I can run and ...
1
vote
1answer
91 views

Why is the tikz picture not center aligned in ieeetran

The MWE is as follows: \documentclass[journal]{IEEEtran} \usepackage{tikz-qtree} \begin{document} \begin{center} \begin{figure}[H] \begin{tikzpicture} \Tree [.* [.+ [.+ S1 S2 ] [.+ S3 S4 ] ] [.S6 ] ] ...
0
votes
0answers
99 views

Using latexdiff with IEEEeqnarray environment

Note: I asked this question on Stackoverflow a month ago, but I'm deleting it and re-posting it here because I got no answers there. I recently discovered latexdiff, and it has generally been a ...
1
vote
1answer
51 views

IEEE tran resizing the table

How do I get rid of this situation? The code for creating the table is : \documentclass{IEEEtran} \begin{document} \begin{table}[htbp] \centering \caption{LCS Grammar for the Web Portal} ...
1
vote
0answers
119 views

IEEE format caption alignment [closed]

When I put a caption on the figures, the alignment changes to Left ! why this happens and how to fix it ? I recently removed the caption package to cope with change that occures in caption font size ...
4
votes
2answers
116 views

Vertical Table Alignment - the nightmare

People, I've looked to multiple questions already asked about this theme but I can't find a straight answer! I have the following table: And, as you can see, there are multiple problems! I have ...
2
votes
1answer
312 views

Add a Copyright and a title in a latex paper

I wonder how I could add the IEEE copyright notice in the bottom centre and the conference title at the upper right hand corner in a LateX paper, with thanks.
1
vote
1answer
69 views

add a header on top of the page

I just want to add a simple text on top all (or the first) pages stating "FOR AUTHOR ONLY". However, I found it not very clear how to add that! Here is the code which I borrow from this topic ...
1
vote
0answers
47 views

Change ieeetran bibliography to have two different author formats

I am working with BibTex. Currently I am using an edited version of the ieeetran.bst (http://www.dlsi.ua.es/wemis09/styles/IEEEtran.bst). I still need one more edit but I am currently not sure how to ...
0
votes
0answers
124 views

Bold math symbols in ieeetran

I'd like to get bold math symbols in an IEEE conference paper. It uses the mathptmxpackage, which seems to not contain bold math symbols. Is there a possibility to get proper bold symbols without ...
5
votes
2answers
221 views

Trouble creating LateX table - ieee paper

I am having trouble creating a semi-complicated table. I've already made some work but it is still not like in the image... The main issue is creating that rectangle box and adding that line/column ...
0
votes
1answer
67 views

IEEE specification for a two-column wide figure on the first page

I'm trying to put a two-column wide figure on the first page of my manuscript to be submitted to IEEE conference. It seems that with IEEEconf.cls it doesn't allow me to do so. It always appears on the ...
1
vote
1answer
36 views

How to write a onecolumn page while using the IEEEtran class?

I am writing a document in which I have to add a code in the appendix section. I am using the IEEEtran class but it does not help me while adding the code using the minted package. Is there a way I ...
1
vote
1answer
25 views

IEEEtran and natbib: forbid line break after [ in citation

I am using a series of small hacks to use IEEEtran with natbib (I like \citeauthor and the like). In an eleven-page document, this produces identical-looking pdf output with and without \ifhack, with ...
1
vote
0answers
65 views

IEEEtrans class, eps images don't appear in their place [closed]

I'm writing a journal paper using the IEEEtran class and .eps images. All of them appear correctly but the ones that have longer caption appear at the end of the document. For example, ...
1
vote
0answers
46 views

Whitespace beside figures in IEEEtran style [closed]

I'm using IEEEtran style for writing my paper. But, sometimes if a figure floats into the next page of referenced place, latex will put a whitespace beside the figure. This is my sample code: ...
4
votes
2answers
75 views

Why does cite influence the spacing after colons in the IEEEtran \markboth header?

Update: This has been solved in cite v5.5. I noticed that loading (or not) the cite package changes the spacing after colons in \markboth headings of IEEEtran \documentclass{IEEEtran} ...
1
vote
2answers
124 views

Use ieeetran.bst to display article ID instead of page numbers

I am following the IEEE style manual which gives the following examples: [1] M. Ito et al., “Application of amorphous oxide TFT to electrophoretic display,” J. Non-Cryst. Solids, vol. 354, no. 19, ...
1
vote
1answer
62 views

IEEEtran bibliography with bibtex formating issues

I am trying to format the bibliography for the first time, I have installed the IEEEtran package and everything is working except I have a couple of issues, they can be seen in the screenshot. ...
1
vote
1answer
73 views

How to make a IEEE cross-reference?

The IEEE cross-reference notation is [1, Fig. 2] that means “in Fig. 2 of reference [1]”, how to make this one in my latex. My code: \begin{filecontents*}{test.bib} @article{ugrinovskii13, doi = ...
3
votes
1answer
93 views

How to automatically interpret full name of a journal to an abbreviation one, if string has blank space between words in the journal entry?

I tried this, http://tex.stackexchange.com/a/111725/44227, it works only for string has no blank space between words in the journal entry, for example MWE: Case 1: without blank space in ...
4
votes
1answer
111 views

how to use cleveref with IEEEeqnarray?

Here is the codes. I have 3 questions about the labeling by using the packages IEEEtrantools and cleveref together. \documentclass{amsart} \usepackage[colorlinks]{hyperref} ...
5
votes
1answer
176 views

Some extra space in references IEEE

I have write this code (a simple citation): \noindent to an acceptable level of approximation. Alternatively, some authors~\cite{roussas1997course} simply require that: And used this command, for ...
1
vote
1answer
71 views

IEEEtran and glossaries

I am trying to figure out how to use IEEEtran with glossaries without running into errors during the compilation with (pdf)latex. Here is my MWE: % arara: pdflatex: {synctex: yes} % arara: ...
3
votes
1answer
170 views

Two Consecutive Bibtex entries with same authornames

I am using the IEEETran document class along with bib style. I have two consecutive bibtex entries with same authors, although different article titles and different journals. When I cite them, they ...
4
votes
1answer
60 views

IEEE Class File 'ieee.cls' Error When Using PGF and Friends (root cause is the color package)

I have to use the IEEE class file which can be found here: http://mocha-java.uccs.edu/ieee/ There you can download the class file itself (ieee.cls) and a demo tex file called ieeecls.tex. When I ...
1
vote
1answer
73 views

Author and department column wise other details row wise

I want following output while using IEEEtran class. Title Author 1 Author 2 Author 3 Department 1 ...
0
votes
1answer
253 views

Block wise author and affiliation

I am using IEEEtran class and I am quite new to LaTeX how can I achieve this output in proper format using IEEEtran class.
1
vote
1answer
67 views

How to write a report template in IEEE format?

Well, I want to write a report in IEEE format ,but I have limited knowledge about Latex, so how am I supposed to begin?
2
votes
0answers
72 views

Multiple Table Horizontal Alignment

I am trying to put up multiple tables together. (Scroll down for MWE). I can not figure out why the last table is misaligned. I tried the solution here but it did not work for me as I am not using the ...
3
votes
4answers
454 views

Writing an IEEE document

I need to write a document by using one of the IEEE Xplore templates but I don't know how to compile it since that my TeX editors don't recognize this template [I have installed in my laptop TeX Maker ...
4
votes
1answer
841 views

Inserting two figures with two captions in one column

Using IEEEtran package, I want to place two figures with two captions (one right one left) in a column. A layout like this ---------------------------- ---------------------------- ...
2
votes
2answers
141 views

Citation problem using Bibtex

I want to cite a PhD dissertation in my paper. I am using IEEEtrans class along with Bibtex for bibliography. The following is my entry in the .bib file. @phdthesis{author2012thesis, ...
3
votes
1answer
44 views

Customize Bibtex entry for IEEEtran

I am using IEEEtran as the bibliography style. I want to append a letter (e.g., R) to the citation within the text and at the end of the document. I was able to solve the problem for the list of ...
6
votes
2answers
2k views

Algorithm in IEEE format

I want to type an algorithm in ieee format. I have used algorithmic package. But using that package, I couldn't type a caption to the algorithm and "Algorithm " above the written algorithm. What ...