{ieeetran} is a document class for IEEE Transactions journals and conferences.

learn more… | top users | synonyms

4
votes
1answer
3k views

How to make a subfigure span the two columns in IEEEtrans style?

I have three figures that I want to put side by side for the sake of comparison, I am using IEEEtrans. I found solutions for how an equation spans the two columns but not for contiguous figures, any ...
1
vote
0answers
131 views

IEEE case: 2 authors, 1+1 Affiliations

It is pretty clear in the IEEE format (for conference) that if less or equal than 3 authors are to be used, one should go with the block mode. However, what happens if one of the two authors have 2 ...
3
votes
1answer
362 views

IEEEtran \title{ * } does not show

I'm practicing LaTeX with IEEEtran.cls. I'm am slowly filling in the information, but I am getting stuck from the beginning. \documentclass[12pt, journal, compsoc]{IEEEtran} \begin{document} \title{ ...
0
votes
0answers
104 views

IEEE Javadocs Citation

I need to cite several Java class documentations in IEEE format in BiBTeX using \bibliographystyle{IEEEtran}. I currently use @electronic in the following format: @electronic{War13, ...
2
votes
1answer
289 views

IEEEtran bibliography style won't compress in-text citation

I cannot get IEEEtran in-text citations to format properly. I am getting citation compressions looking like [1-5] instead of [1]-[5] as it is in IEEE journals. I have bibliographies after each chapter ...
6
votes
3answers
182 views

Prevent line break before equation environment in enumerated list item

Suppose I have something like \begin{enumerate} \item \begin{equation*} some eq \end{equation*} \item \begin{IEEEeqnarray*}{l} eq 1 \\ eq 2 \\ ... ...
1
vote
1answer
882 views

How to change figure caption to Fig. 1. in stead of Fig. 1: [duplicate]

My Figure caption is now like this: (Fig. 1:Caption of figure) and I want to change it to (Fig. 1. Caption of figure). Also in the Table caption I want to get it like this: (Table II. Title of ...
2
votes
1answer
1k views

Problems with Subfigures?

As a newbie to LaTeX, I am currently preparing my very first paper. Since the conference to which I am going to submit my paper to requires the authors to use the IEEE conference paper template. I ...
1
vote
0answers
213 views

IEEEtran 4 authors and 2 affiliations [duplicate]

I need to use IEEEtran with 4 authors and 2 affiliations. I need to have all the 4 authors in one row and then the 2 affiliations should be below the authors row in two columns (side by side) and then ...
4
votes
1answer
332 views

How to place the QED symbol at the end of equation using IEEEproof environment?

I was wondering how one can place the QED symbol at the end of an equation when using the IEEEproof environment? With the standard proof environment of amsthm this is done by simply placing \qedhere ...
2
votes
2answers
647 views

problem having copyright notice and header at the same time in IEEEtrans template

I have problem having IEEE copyright notice and Conference header both at the same time in the first page of my paper that uses IEEE Trans class. I notice that \thispagestyle{fancy} makes the ...
7
votes
2answers
3k views

How to remove bookmarks from you pdf latex file?

how does one remove bookmarks from a LaTeX generated pdf file? I wrote the article in LaTeX. When submiting the .pdf to IEEE eXpress for checking, I get the error: file contains bookmarks. Any ...
4
votes
2answers
843 views

Subfigure arrangment with no caption with IEEE format

I have a little problem. I am trying to arrange to subfigures side by side (i.e. a graph and its legend) using the IEEE article format and I cannot remove the subcaption. I was using package ...
5
votes
2answers
129 views

IEEEtrantools clash with cleveref

I have two rather complex equations I would like to align at the two points to the left and to the right of the '=' sign. Elsewhere in the document I am using cleveref's \cref command, but that ...
5
votes
1answer
612 views

How to equalize the two columns in the last page INSIDE the IEEEbiography enviroment

I'd like to make the two columns of the last page of equal length but starting the new column INSIDE the IEEEbiography environment. I have four authors in the last page, the second one has a long ...
2
votes
0answers
105 views

biblatex: How to modify the ieee-alphabetic to group papers by authors?

When using the ieee-alphabetic template for biblatex, it gives [author1-year1; author1-year2; ...; auhtor2-year1; author2-year2,....] in my pdf. I manage to get the years arranged in the numerical ...
2
votes
0answers
44 views

LaTeX does not render the picture? [duplicate]

I am a bit new LaTeX, so having some difficulties. I am writing a paper using the IEEtran template. I use the graphicx package to insert the figures: \usepackage[pdftex]{graphicx} I try to add the ...
1
vote
1answer
1k views

Displaying Bibliography Photo in IEEE Journal

I've formatted my photo as a PDF but it doesn't seem to be working correctly. Here is the relevant code (I am using the IEEE bare journal template and IEEEtran class with the journal option). Here is ...
4
votes
1answer
572 views

Getting Rid of Comma before 'and' in Authors' Names

The skeleton of my article looks like \documentclass[10pt, twoside]{article} \title{An Example} \author{S. Barman Roy} \begin{document} .... \bibliographystyle{unsrt} \bibliography{library} ...
3
votes
0answers
462 views

Proper Bibliography Style

I am writing a paper with IEEE conference document class a skeleton of which is shown below. \documentclass[conference, a4paper]{IEEEtran} \begin{document} \bibliographystyle{IEEEtran} ...
1
vote
1answer
1k views

Remove vertical space between paragraphs for IEEEtran class for conference

I am using IEEEtran latex class 2-column format for conference. It gives me spacing between paragraphs which I want to take off. I got the template from this link. ...
2
votes
1answer
375 views

How to suppress Warning--empty author Message?

I am citing the IEEE-754 standard and it doesn't have an author. However, when I generate my PDF, the tool I am using (texnixcenter) provides a warning that there is no author. I would like to know ...
1
vote
1answer
3k views

IEEEtran, longtable, switch to one column mode for the appendix

I've this very long table to put in the appendix of a 2 column, IEEEtran conference paper. I'm trying to use longtable, but apparently longtable has to be used in one column mode only. Is there a way ...
2
votes
0answers
2k views

IEEEtran not working [closed]

I am trying to use the IEEEtran for my document. I have used it in the past, but now I have a new system and have to install all the programs again. I downloaded IEEEtran.zip from a recommended ...
2
votes
1answer
280 views

No numbering environment conflicting with IEEE

So I made a remark environment, which is used just once, and I do not want to get it numbered. To use \newtheorem* command I need to activate amsthm package....but then this package is making changes ...
2
votes
0answers
498 views

IEEEtran's \IEEEoverridecommandlockouts clashes with \maketitle [closed]

The heading of question says it all. \documentclass[conference]{IEEEtran} \IEEEoverridecommandlockouts %% INFOCOM 2013 addition: \makeatletter \def\ps@headings{% ...
5
votes
1answer
196 views

Section numbering changes in TOC, but not in body - specific to IEEEtran

I'm having a strange issue with the IEEEtran package. I'm using \renewcommand\thesection{\arabic{section}} and so on to change the section, subsection, and subsubsection numbering. As mentioned in the ...
4
votes
1answer
215 views

Bug IEEEtran.bst file?

I am about to submit my thesis and just realised that in the IEEEtran.bst file might be a bug. The following 3 references are from my thesis: [22] D. C. Henderson, “Weight gain with atypical ...
1
vote
1answer
115 views

IEEEtran class: How can I center the title using the two columns option?

When I compile, I always get the title as part of the left column. I'd like the title to be on the top of the page, bridging across the two columns. Thanks Diego
1
vote
2answers
472 views

How can I remove the comma between volume and number in the IEEEtr.bst file

I just started modifying my ieeetr.bst file. I was able to switch first and last name for my (journal article) authors in the bibliography. I also wanted to display the Volume and Issue number as ...
1
vote
1answer
166 views

Space in while printing but not viewing PDF [closed]

I am trying to write in a IEEETran class of latex. I have a very strange problem. The minimum stripped code is as follows - \documentclass[conference]{IEEEtran} \def \b {\beta~} ...
2
votes
1answer
119 views

Modifying section, subsection based on scope?

Using MS Word 2013 I mocked up what I would like to create using LaTeX: I tried exporting it in LibreOffice using its writer2latex; but that didn't work. So starting from the sectionbox LaTeX ...
2
votes
1answer
198 views

using IEEEtran document class -how to format three authors using IEEEtran

I am using IEEE Transactions conference class \documentclass[10pt, conference, compsocconf]{IEEEtran} How I should align the author properly so that it appears in this format? title ...
4
votes
1answer
89 views

control textcase within section heading

I am using IEEE document class in conference mode. I want to use a special word: name of my protocol inside the section title. The word has the form: aBCD/eFGH. Since each word of the whole section ...
4
votes
1answer
457 views

tiny fonts for IEEEtran not working on biblography

I added \tiny before adding \bibliographystyle. But it is not changing the font size. Any suggestions for reducing the font size of the reference? \tiny{ \bibliographystyle{IEEEtran} ...
3
votes
1answer
512 views

how to use IEEEeqnarray in standard latex classes?

Is it possible to use IEEEtran commands in standard latex classes, e.g. \documentclass{article}? I want to import IEEEtran as a package, not a documentclass. Thanks,
1
vote
0answers
174 views

Conflicting commands in preamble [closed]

I am using the class IEEEtran for writing a journal. I have two conflicting commands in my preamble. The first command has been used by me for some time, though I have no idea why it should be there. ...
1
vote
0answers
305 views

Avoiding page break in the Latex bibliography list [closed]

I have a problem, the references are being split by the page break in a such strange manner. I use IEEE style and already tried \usepackage[section]{placeins} but it influences any other section, ...
2
votes
2answers
1k views

ieeetran caption question

In the ieeetran how to, they are using caption with their examples; however, latex tells me not to use caption. So if I use subfloat, all my figures are labeled as such (a), (b) and don't have a main ...
1
vote
0answers
1k views

BibTeX: citing a standard in IEEEtran style [closed]

This should really be a comment on BibTex: citing IEEE standard, but I only have enough rep to ask a new question. Here is how you can cite a standard in BiBteX using the IEEEtran style. The code is ...
1
vote
0answers
189 views

IEEEtranSN + natbib and @masterthesis [closed]

I'm using natbib along with bibliographystyle{IEEEtranSN}. Everything works great, but when I'm trying to add an @masterthesis entry, I get the following warning: Warning--entry type for ...
1
vote
0answers
98 views

IEEEtran and using plots [closed]

Within a IEEEtran 2 column document, 2 plots are too small concerning their width. Should I place them (a) vertical or (b) interrupt the 2 column layout? btw it will be submitted to a conference. ...
4
votes
1answer
169 views

Write lowercase in Section (IEEEtran class)

I want to write lower case in a section, I've tried using \MakeLowercase but its not working. Here is what I tried: \section{Experiment I: T\MakeLowercase{he effect of changing the distance}} I'm ...
3
votes
1answer
953 views

How to cite email/correspondence in IEEE format?

I have several email conversations I would like to cite in my PhD thesis. The bibliography style that I'm using is \bibliographystyle{IEEEtranSN}. I know that style is not IEEE compliant in a strict ...
4
votes
3answers
1k views

How to determine the font being used by a latex document

The scenario is as follows. I am working on a paper using the IEEEtran latex class. I am generating some figures using the Matplotlib plotting library in Python. Matplotlib lets the user adjust the ...
2
votes
1answer
1k views

IEEEtran and subfig - figures overflow onto second column

\documentclass[final,journal,letterpaper,twocolumn]{IEEEtran} \usepackage[demo]{graphicx} \usepackage[caption=false,font=footnotesize]{subfig} \usepackage{fixltx2e} \begin{document} ...
4
votes
1answer
369 views

Alignment issue with bibtex using IEEEtran class

Only the first reference of my bibliography is correctly aligned within the margins. The other references go outside the margins to the left and right. ...
3
votes
2answers
208 views

How to customise the numbering system of subequations with IEEEtranstools?

I'm using IEEEtrantools's IEEEeqarray, and in there I can print sublabeled equations like x^2 (1a) y^2 (1b) with: \begin{IEEEeqnarray}{rCl} x & = & y \IEEEyessubnumber \\ z & ...
7
votes
1answer
1k views

Add Overbrace to describe a column of matrix

I want to add some over-braces to a matrix to get the following output: However, this this what I managed to get: I don't know how to get the neuron 1 and neuron 2 headings...I was thinking of ...
3
votes
1answer
107 views

Different styles and classes (my own + IEEEtran)

I'm writing my thesis based on documentclass{report}. It uses my own style (some other information about it here), and everything works just fine. Now, according to my University requirements, I ...