{ieeetran} is a document class for IEEE Transactions journals and conferences.

learn more… | top users | synonyms

20
votes
1answer
18k views

IEEE affiliation blocks

I'm using the IEEE format to write a paper. I have 4 authors from two institutions so I need blocks of affiliations. This is how I want it to look like: Author 1*, Author 2#, Author 3#, Author 4* ...
3
votes
1answer
221 views

How to set the bold font of the keyword Definition using IEEEtran without introducing package ntheorem?

I am writing a paper with the recommended template IEEEtran.sty. IEEEtran has its own theorem environment such as definitions, theorems, axioms, corollaries, lemmas, and so on. I want to set the bold ...
0
votes
0answers
23 views

IEEEtran table formatting doesn't work

I'm totally new to this so any insight would be greatly appreciated. I want to create a document using IEEEtran and despite trying on multiple operating systems and editors I can't seem to get tables ...
1
vote
0answers
65 views

Squeezing a paper into a page limit - with IEEEtran

I'm working on this draft for a submission to some conference which - woe is me - uses IEEEtran. I could rant about that class for days, but never mind right now... the point is, I need to squeeze ...
3
votes
1answer
38 views

Subsubsection numbering in IEEEtran Computer Society Journals template bleeds into text

I'm using a modified IEEEtran class with the template for Computer Society Journals (found here). When I produce a PDF of the basic demo (using Texmaker), I noticed that the numbering for ...
2
votes
1answer
29 views

How to change the sans serif font used by IEEEtran document class

The sans serif fonts used by article and IEEEtran document classes clearly differ. Below are two MWEs and corresponding outputs. \documentclass[10pt]{article} \begin{document} \textsf{The quick ...
1
vote
0answers
16 views

Decreasing label separator width in IEEETran format

I'm using IEEE Transactions Latex format (conference). Below is an MWE where it can be seen that the distance between bullets and item texts are too wide to be decent. Can it be reduced somehow? ...
2
votes
1answer
37 views

IEEEtran Tabular Won't Fit Into 0.7in Margin

Using IEEEtran, I am trying to combine two tabulars in a single double-width table* environment. (This is the only way I could figure out to correctly order the tables in the paper, otherwise LaTeX ...
1
vote
0answers
15 views

Author name not showing when using IEEEtran bib style

If I use the IEEEtran bibstyle with the default Bibtex \bibliographystyle{IEEEtran} the bib entry below gets listed in the references section without author name. @Article{simon_comments_1952, ...
2
votes
1answer
31 views

To get “et al” in the text when a reference is cited with natbib and IEEEtranN

I have loaded \usepackage[round, sort]{natbib} and \bibliographystyle{IEEEtranN} my .bib is: @misc{kinaSUR, author = "{Barnett, S., Etchells, D., Weidelich, Z. and Tomkins,M}", title = ...
1
vote
1answer
39 views

How to tell bibtex to ignore the citations in the abstract when numbering the references?

I use the IEEEtran bibliography style for my article. By default, the first-cited reference cited in the document is numbered as [1], the second one as [2], and so on. This seems to be IEEE's ...
2
votes
1answer
19 views

bound width of a single lstlisting to one column inside a two column IEEE template

I use IEEE double column template and inside it I add a C++ code. I expect the code to be bounded within a single column however it infringes to the next column. How to fix this code? I would avoid ...
2
votes
2answers
1k views

How to reduce space after authors block? (ieeetran)

I'm using \documentclass[10pt, conference, compsocconf, letterpaper]{IEEEtran}. How can I reduce the space between the authors block (with their affiliations) and the text? Right now I have: Paper ...
0
votes
0answers
20 views

IEEE template shows the wide figure in the middle instead of top

I expect this code to show me a figure on top of the next page: \begin{figure*}[t!] \centering \includegraphics[width=\textwidth]{tiger} \caption{caption} \end{figure*} I tested it and it works ...
0
votes
0answers
19 views

BibTeX generating “\BIBentryALTinterwordspacing ------” in BBL file using IEEEtran.bst [duplicate]

I'm writing up a LaTeX document in TeXnicCenter, using MikTeX as an interpreter and JafRef to write my .bib file. I've downloaded and specified the latest copy of IEEEtran.bst, and while most of my ...
0
votes
0answers
33 views

Inserting a double column picture in bottom of IEEETran first page

I'm trying to add a double column width picture at the bottom of the first page of an IEEEtran class. What I have right now is something like that. \documentclass[conference]{IEEEtran} ...
0
votes
0answers
49 views

double column wrapfigure

I tried many different ways of solving this problem. I am getting really desperate. I am new to TeX and I am using overleaf in my browser as my LaTeX tool. My document is in the ieeetran journal ...
1
vote
2answers
45 views

Placing a figure in the bottom of a page spanning the two columns of an IEEE document

I am writing an IEEEtran article. I use graphicx for inserting .pdf images. Normally, LaTeX selects a position like A. I want LaTeX automatically find and insert the image to a position like B. How ...
11
votes
7answers
18k views

References in IEEEtran?

I've downloaded the official IEEE LaTeX template but am having some trouble adding references in bibtex format. For instance if I wanted to cite and reference this article, given as: ...
2
votes
2answers
45 views

Conference title

How can I ​add the conference title, date and venue only to the upper right-hand corner of the first page (title page) of your source document of IEEE conference paper in font size 9pt? It looks like ...
1
vote
0answers
8 views

IEEEtran-compsoc class messes up “description” [duplicate]

I'm using the template %% bare_jrnl_compsoc.tex %% V1.3 %% 2007/01/11 %% by Michael Shell %% See: %% http://www.michaelshell.org/ %% for current contact information. which can be downloaded from ...
2
votes
0answers
2k views

Figure spanning two columns in IEEE Trans template? [duplicate]

I am using IEEE Transactions template for a paper. The problem I am facing is that I have a figure that I want to span two columns instead of a single one. Is there a way to do it?
1
vote
2answers
39 views

Use ieeetran.bst to display article ID instead of page numbers

I am following the IEEE style manual which gives the following examples: [1] M. Ito et al., “Application of amorphous oxide TFT to electrophoretic display,” J. Non-Cryst. Solids, vol. 354, no. 19, ...
2
votes
0answers
63 views

problem running document with IEEEtran class

I have installed miktex and winedt on my laptop. when I am trying to compile my files the below errors are appeared. Basically, I am sure that there is nothing wrong with my files since I can run and ...
4
votes
2answers
42 views

Why does cite influence the spacing after colons in the IEEEtran \markboth header?

Update: This has been solved in cite v5.5. I noticed that loading (or not) the cite package changes the spacing after colons in \markboth headings of IEEEtran \documentclass{IEEEtran} ...
4
votes
2answers
392 views

Footer/Header for first page of two column article

How can I add a footer and header just on the first page of a two column scientific article of type \documentclass[conference]{IEEEtran} and/or \documentclass{article}?
1
vote
1answer
41 views

Why is the tikz picture not center aligned in ieeetran

The MWE is as follows: \documentclass[journal]{IEEEtran} \usepackage{tikz-qtree} \begin{document} \begin{center} \begin{figure}[H] \begin{tikzpicture} \Tree [.* [.+ [.+ S1 S2 ] [.+ S3 S4 ] ] [.S6 ] ] ...
0
votes
0answers
53 views

Using latexdiff with IEEEeqnarray environment

Note: I asked this question on Stackoverflow a month ago, but I'm deleting it and re-posting it here because I got no answers there. I recently discovered latexdiff, and it has generally been a ...
1
vote
1answer
28 views

IEEE tran resizing the table

How do I get rid of this situation? The code for creating the table is : \documentclass{IEEEtran} \begin{document} \begin{table}[htbp] \centering \caption{LCS Grammar for the Web Portal} ...
2
votes
1answer
75 views

Add a Copyright and a title in a latex paper

I wonder how I could add the IEEE copyright notice in the bottom centre and the conference title at the upper right hand corner in a LateX paper, with thanks.
5
votes
2answers
135 views

Trouble creating LateX table - ieee paper

I am having trouble creating a semi-complicated table. I've already made some work but it is still not like in the image... The main issue is creating that rectangle box and adding that line/column ...
4
votes
2answers
104 views

Vertical Table Alignment - the nightmare

People, I've looked to multiple questions already asked about this theme but I can't find a straight answer! I have the following table: And, as you can see, there are multiple problems! I have ...
1
vote
0answers
65 views

IEEE format caption alignment [closed]

When I put a caption on the figures, the alignment changes to Left ! why this happens and how to fix it ? I recently removed the caption package to cope with change that occures in caption font size ...
1
vote
0answers
19 views

Change ieeetran bibliography to have two different author formats

I am working with BibTex. Currently I am using an edited version of the ieeetran.bst (http://www.dlsi.ua.es/wemis09/styles/IEEEtran.bst). I still need one more edit but I am currently not sure how to ...
1
vote
1answer
45 views

add a header on top of the page

I just want to add a simple text on top all (or the first) pages stating "FOR AUTHOR ONLY". However, I found it not very clear how to add that! Here is the code which I borrow from this topic ...
0
votes
0answers
50 views

Bold math symbols in ieeetran

I'd like to get bold math symbols in an IEEE conference paper. It uses the mathptmxpackage, which seems to not contain bold math symbols. Is there a possibility to get proper bold symbols without ...
0
votes
1answer
41 views

IEEE specification for a two-column wide figure on the first page

I'm trying to put a two-column wide figure on the first page of my manuscript to be submitted to IEEE conference. It seems that with IEEEconf.cls it doesn't allow me to do so. It always appears on the ...
1
vote
1answer
24 views

How to write a onecolumn page while using the IEEEtran class?

I am writing a document in which I have to add a code in the appendix section. I am using the IEEEtran class but it does not help me while adding the code using the minted package. Is there a way I ...
1
vote
1answer
16 views

IEEEtran and natbib: forbid line break after [ in citation

I am using a series of small hacks to use IEEEtran with natbib (I like \citeauthor and the like). In an eleven-page document, this produces identical-looking pdf output with and without \ifhack, with ...
1
vote
0answers
40 views

IEEEtrans class, eps images don't appear in their place [closed]

I'm writing a journal paper using the IEEEtran class and .eps images. All of them appear correctly but the ones that have longer caption appear at the end of the document. For example, ...
1
vote
0answers
34 views

Whitespace beside figures in IEEEtran style [closed]

I'm using IEEEtran style for writing my paper. But, sometimes if a figure floats into the next page of referenced place, latex will put a whitespace beside the figure. This is my sample code: ...
1
vote
1answer
36 views

IEEEtran bibliography with bibtex formating issues

I am trying to format the bibliography for the first time, I have installed the IEEEtran package and everything is working except I have a couple of issues, they can be seen in the screenshot. ...
1
vote
1answer
40 views

How to make a IEEE cross-reference?

The IEEE cross-reference notation is [1, Fig. 2] that means “in Fig. 2 of reference [1]”, how to make this one in my latex. My code: \begin{filecontents*}{test.bib} @article{ugrinovskii13, doi = ...
3
votes
1answer
56 views

How to automatically interpret full name of a journal to an abbreviation one, if string has blank space between words in the journal entry?

I tried this, http://tex.stackexchange.com/a/111725/44227, it works only for string has no blank space between words in the journal entry, for example MWE: Case 1: without blank space in ...
4
votes
1answer
59 views

how to use cleveref with IEEEeqnarray?

Here is the codes. I have 3 questions about the labeling by using the packages IEEEtrantools and cleveref together. \documentclass{amsart} \usepackage[colorlinks]{hyperref} ...
3
votes
4answers
108 views

Writing an IEEE document

I need to write a document by using one of the IEEE Xplore templates but I don't know how to compile it since that my TeX editors don't recognize this template [I have installed in my laptop TeX Maker ...
5
votes
1answer
98 views

Some extra space in references IEEE

I have write this code (a simple citation): \noindent to an acceptable level of approximation. Alternatively, some authors~\cite{roussas1997course} simply require that: And used this command, for ...
1
vote
1answer
48 views

IEEEtran and glossaries

I am trying to figure out how to use IEEEtran with glossaries without running into errors during the compilation with (pdf)latex. Here is my MWE: % arara: pdflatex: {synctex: yes} % arara: ...
0
votes
0answers
46 views

Examples of IEEEeqnarray

A beginner question: I am struggling to understand the use of column types (r,c,l,R,L,C,v,V etc) in IEEEeqnarray in IEEEtrans class. I am looking for some examples so that I can understand what is ...
3
votes
2answers
889 views

IEEEtran: centering (double-column) figure captions

I'm looking for a method to center the figure captions in single- and double-column mode. Here is my code \documentclass[journal]{IEEEtran} \usepackage[caption=false]{subfig} ...