{include} is about the \include command which makes LaTeX process the content of a given file, add page breaks before and after and open a new auxiliary file for the given file.

learn more… | top users | synonyms

2
votes
1answer
59 views

Usage of include (graphics, section's and only)

I'm working on my master thesis in LaTex (using TexMaker). I'm a bit new but getting the hang of it. At the moment i'm making my sections in different tex documents. For example, i have an abstract, ...
1
vote
1answer
967 views

pdf_tex files and \import: PDF file not found

I am currently working on my PhD thesis, and I am having trouble including a pdf_tex and pdf file created using Inkscape. I am using TeXStudio and PDFLaTeX. The relevant files are: phd_thesis_all/...
7
votes
0answers
61 views

\importonly for only processing a single import?

I am composing a large document, and instead of using include/input, I use the \subimport* command from the import package. This allows me to take care of relatives paths very easily. However, the ...
5
votes
0answers
1k views

How do I include Postscript graphics in a LaTeX file?

I am trying to include sample.ps file to my document with the following code \documentclass{article} \usepackage[margin=3cm,a4paper]{geometry} \usepackage{amsmath,amsthm} \usepackage{amsfonts} \...
3
votes
0answers
51 views

Synchronization between source code and PDF viewer fails for \include{.} (go to source / go to PDF)

In my LaTeX document I am using the following structure: I have a main tex-file from which chapters are included via include(.). Thus, each chapter has its own tex-file. For some time now, I ...
2
votes
0answers
20 views

How to compile just one chapter, with bibliography of citations in that chapter?

I'd like to compile one chapter in a thesis, and include the bibliography, with only the citations found in that chapter. I am using \include and \includeonly to get just the chapter I want, but it ...
2
votes
0answers
20 views

commands / package for target-group-specific creation of documents

Is there a package that allows me to create target-group-specific documents. Basically I have two scenarios: There is an exercise document and each task is initially followed by a solution. In that ...
2
votes
0answers
76 views

Is newclude (still) a good package to use?

I came up with this very MWE while trying to organize my code into several section files to speed up compilation of a journal paper (sections, not chapters!): \documentclass{article} \usepackage{...
2
votes
0answers
43 views

References undefinded when using \include{filename}

I am compiling my thesis where I have a rootfile and each chapter is read in with \include{chapterfolder/chaptername}. Everything works but the references, they are all undefinded. When I run BibTex ...
2
votes
0answers
87 views

Opacity Logo in beamer slide

Hi i have the following Beamer slide and i want to make the logo in the bottom right corner have an opacity on say 50 % ? Here is my code \documentclass[a4paper, ]{beamer} \usepackage[...
2
votes
0answers
71 views

\include{} and bibtex

I can't make \include{} and BibTeX work together for some reasons. The bibliography is displayed but not the references. They all appear with ?. What is wrong with me? Here is my code : \...
2
votes
0answers
37 views

Trace errors when using \include

I'm writting my thesis and decided to divide my main .tex file into different files containing the chapters using \include. However, when I compile my main file the error logs don't take me to the ...
1
vote
0answers
77 views

How to avoid overfull and underfull boxes?

I can't solve my problem with overfull and underfull hboxes and vboxes. \usepackage{setspace} \usepackage{subfiles} \usepackage{nomencl} \makenomenclature \usepackage{color} \usepackage{tabularx} \...
1
vote
0answers
35 views

Collate apa6 documents into book

I'm getting a Master of Education (Go Mizzou Tigers!), and I'm using overleaf to create all of my tasks/milestones/deliverables. It's going pretty well so far, and I'm using the apa6 package, which is ...
1
vote
0answers
58 views

Problems include graphics

I am trying to include a network I created in Gephi into my thesis, but I am having problems doing it. I currently do it in the following way: \begin{figure}[ht] \centering \includegraphics[...
1
vote
0answers
71 views

Include pdfpages and unwanted scale

When I include a pdf file with the command \includepdf[pages=1]{file} from the package \usepackage[final]{pdfpages}, I obtain a scaled document (in a smaller height). How can I obtain rigorously the ...
1
vote
0answers
86 views

Defining path to file in separate directory in include statement

I have a main document that includes a list of 'include' statements. Could someone please help me with defining the path to the files that need to be included. My directory structure is: Book Title ...
1
vote
0answers
229 views

Include file with prefixed labels

Say I \include A.tex and B.tex in main.tex. Say A.tex has something labeled in it, \label{a}. Then I can just reference this in B.tex as \ref{a} without any problem. I don't want to be able to do this:...
1
vote
0answers
348 views

Texmaker bibtex works with \input not with \include

I use bibtex 0.99d with Texmaker 4.3. I have a multi .tex file document with the main document using \include{} for chapters. The bibtex configured as bibtex build/%.aux doesn't work. However when ...
1
vote
0answers
76 views

Make arara ignore \includeonly command

I'm actually about to write up my dissertation and have split it into chapters that are included into the main document via \include{chapter}. To keep compilation times short while working on it, I ...
1
vote
0answers
174 views

Combine sections into chapter. Each section a separate .tex file

I am putting together a portfolio of evidence together. I have written all the individual pieces of evidence as separate latex documents. Some of these documents have references at the end of the ...
1
vote
0answers
1k views

Run Bibtex on aux files in subfolders, multiple OS

I have a complete framework for my PhD thesis based on classicthesis/arsclassica. Single chapters are located in Subfolders like this. main.tex Chapters/project1/project1.tex Chapters/project2/...
1
vote
0answers
75 views

Possibility to show notes on included PDF pages

I include pages from an pdf in my document: \includegraphics[page=4, clip, width=\textwidth, keepaspectratio]{graphics/lorem.pdf} However, if I make notes in the PDF (i.e. used Skim, exported to "...
0
votes
0answers
25 views

Table of contents not created properly

I used \tableofcontents command but it only worked once. Then, it only included a single numbered chapter. Does that mean that the table won't include unnumbered chapters? How can I include them?
0
votes
0answers
23 views

Auxiliary file in other directory - input fails

I'm using pdflatex to compile my files and BibTeX for bibliography stuff. Especially I use the -output-directory flag to keep the generated files in another folder and the -bibtex flag to compile the ...
0
votes
0answers
23 views

Including one document into another document with different packages, geometry, font, etc

How can I include a whole document as a subdocument starting with documentclass into another document? (for instance a titel page as a complete document) I put the subdoc in a separate .tex file and ...
0
votes
0answers
33 views

Underbracing an equation with tikz in a sub document, which is thereafter included in a main document

Notice, that for the following I have a master (.tex) document which includes the several parts/chapters (.tex). In one of the included chapters, I have an equation (with a square root) that I need ...
0
votes
0answers
31 views

Texmaker: display the structure of the whole document

I am working on a Latex document which includes several parts in separate documents. Is there a way to make Texmaker look into the included documents to display on the left hand sire panel all the ...
0
votes
0answers
11 views

Using include-directory from inside the IDE

I changed my way of building documents by using the following command-line-argument: pdflatex.exe -include-directory="C:\myRepository" -synctex=1 -interaction=nonstopmode %.tex since I want to ...
0
votes
0answers
39 views

Using \include \input in document

Is there a way to include a document within another document and retain different format of the documents. For example, I am writing a proposal (which has a certain format) and will like to include ...
0
votes
0answers
8 views

Using \addlines in large documents with \includeonly

I am finalizing an 800 page book. I want to work with \includeonly in order to prevent texing the whole document again and again. I have big problems with \addlines from the package addlines since \...
0
votes
0answers
18 views

Include TeXDoclet error

I'm trying to include a Javadoc (LaTeX format) genereted with TeXDoclet. I follow the instructions in the documentation: Compile with the -include option, which gives me two files: docs.tex and ...
0
votes
0answers
123 views

LaTex \include space in path

It's not graphs. It's a .tex file that I want to include. I used \input and it worked fine. But as I keep writing more and more, the file got bigger and bigger and I decided to use chapterbib to make ...
0
votes
0answers
93 views

File structure/organization for book

I need to write a short book divided in 3 big chapters and about 40 short sections (for a maximum of a couple of pages each). Dividing the book in 3 files seems very messy, but dividing it into 40 ...
0
votes
0answers
48 views

Exclude citations from other chapters, but make cross-references work

I'm writing up my PhD dissertation, and I tend to compile each chapter separately. Each chapter is in a separate document, and is included in the main LaTeX file. I use \includeonly to only include ...
0
votes
0answers
148 views

How to use shell environment variable with import/include/input?

I would like to create a folder in my home directory to store a few files in it that should serve as templates e.g. handout.tex. I begin to write my specific file somewhere in my filesystem. Now I ...