{itemize} is about the itemize list environment. If you use this tag, add the more general {lists} tag.

learn more… | top users | synonyms

1
vote
3answers
46 views

how to locate the equations to the left in “itemize” environment as shown in the picture

I want to put the equations in the itemize environment, however, the equations are centered. Do you guys know how to generated the layout shown in the picture?
5
votes
1answer
64 views

How to “shallow” \renewenvironment of \itemize?

I want to patch exactly the outer level of \itemize, whereas the following MWE (expectedly) patches all of them: \documentclass{article} \begin{document} \setlength{\fboxsep}{0pt} \let\saveditemize=...
0
votes
1answer
33 views

Applying \pause for each item in beamer?

In order to make items appear sequentially in beamer mode, I would typically use: \begin{itemize} \item No.1 \pause \item No.2 \pause \item No.3 \pause \end{itemize So I have to type '\pause' three ...
3
votes
1answer
58 views

Space-saving itemize in table

I want to use a bullet list in a table. My problem with this is that there is a lot of space to the left and basically half my table is empty. So I searched for a solution on StackExchange and found ...
3
votes
1answer
70 views

Don't break item (without disappearing footnotes)

I am trying to keep items (used within a command) from breaking internally, but the solutions I've found end up causing the footnotes to disappear. Any advice on how to keep the footnotes alive but ...
4
votes
1answer
49 views

Overlays in beamer : itemize items from different colors

I have a problem with Beamer. I'm trying do use lists with items of different colors, appearing once at a time. Here's my MWE : \documentclass{beamer} \usetheme{Warsaw} \newcommand\coloreditem[1]{\...
2
votes
2answers
45 views

How to continue a double itemize in a new frame (Beamer)

i want to split an itemize that is inside another itemize because i do not have enough space in the frame (neither using scriptsize): Example: \begin{frame}{} \begin{itemize} \item {} ...
3
votes
3answers
51 views

Wrap text in tabular and itemize?

I would like to get the following effect without manually using & and \\ to wrap the text (i.e., all the text will be wrapped automatically) \documentclass[11pt,letterpaper]{article} % Make lists ...
0
votes
1answer
21 views

How to control vertical spacing before and after Itemize within the tabular environment?

After asking this question about how to add some spacing between two row in a tabular environment, I figured out some strange behaviour of the itemize command within the tabular* environment. Using ...
3
votes
1answer
29 views

Error: "Something's wrong--perhaps a missing \item.'' using multicol in a \newenvironment, can it be fixed?

The below works, but produces an error message Something's wrong--perhaps a missing \item. Does anybody know why it throws an error, and how to correct my code? \documentclass{article} \usepackage{...
3
votes
1answer
19 views

Extract text from items

This is my document: \documentclass{scrreprt} \newcommand\foo[1]{#1} \begin{document} \foo{% \begin{itemize} \item[x] hello \item[y] world \end{itemize} } \end{document} I'd like to extract the ...
2
votes
1answer
53 views

Itemize character [duplicate]

I want to change bullet in itemize to specific char but I can't find solution how to put '^' and ']' char in to this... Any thoughts? \begin{itemize}[labelindent=1.5em,labelsep=1cm,leftmargin=*] \...
3
votes
1answer
73 views

how to create personalised item warsaw beamer

Am using the warsaw theme in beamer. I want to show this item form: I try this code but it doesn't show me the best result : \begin{itemize}[font=\color{cyan} \large, label=\ding{118}] \item ...
2
votes
2answers
40 views

Decrease vertical space after header in cvlist of currvita

I want to decrease the vertical space between the header of my cvlist and the first item. So "Schulbildung" and the item "Heintz Grundschule Berlin" should be closer than right now. How can I achieve ...
0
votes
0answers
26 views

ntheorem in beamer has a problem with <alert@> -commands

Consider the following (hopefully) minimal code: \documentclass{beamer} \PassOptionsToPackage{ngerman}{babel} \PassOptionsToPackage{thmmarks}{ntheorem} \makeatletter \let\th@plain\relax \let\...
3
votes
2answers
34 views

Format IEEE Tran Itemizethanks

I am writing a paper using IEEE Tran (bare_jrnl_compsoc). When I added the following code I have a blank page in the beginning. \author{Md~Osman~Gani, Taskina~Fayezeen, Sheikh~Iqbal~Ahamed, ...
0
votes
1answer
64 views

Questions regarding itemize in Latex Beamer

I am using Latex Beamer and I have questions with respect to itemize. How is it possible to widen the space between the first level of itemize and the second one by means of a global statement? ...
1
vote
1answer
42 views

Sorting a list alphabetically by a Macro output

this is an extended question taken by Alphabetically display the items in itemize The solution posted by Werner is amazing. But what I need is to sort by a value of a macro. For example \foo{Label} ...
3
votes
2answers
55 views

beamer to show nested-subitem when all (non-nested) items covered

I am trying to get an alternating highlighting effect between \itemize items and subitems (which are just nested itemize items), but there is an issue in that when all of the non-nested items are ...
6
votes
2answers
260 views

How to create very customized “numbered” environments

I want to have an environment alike or identical to the itemize or enumerate environments in such a way that I be able to fully customize each item. For example, I want to use my very own defined "...
0
votes
3answers
55 views

Text side-by-side latex beamer

\begin{frame}{Workload Categorization} Benchmark suites:\hspace{4cm}64bit architectures: \begin{itemize} \item 22 SPECcpu2006\hspace{3.5cm} Intel SandyBridge \item 11 SPLASH2x\hspace{4.1cm} ...
1
vote
2answers
57 views

Itemizing theorem body

Using package amsthm, the desired theorem style achieved, \documentclass{book} \usepackage{amsthm} \newtheoremstyle{mystyle}{}{}{}{}{\bf}{}{\newline}{} \theoremstyle{mystyle} \newtheorem*{mythm}{...
0
votes
0answers
35 views

Indent the footnotetext of author affiliation

I use authblk package to manage the title block and authors. In the corresponding author address in the footnote I want to write: Corresponding author at: Institute address ... The address is so long ...
1
vote
1answer
86 views

Minipage inside itemize, bullet point position

Sometimes I wish to include a small diagram next to the text which I could achieve by using two mini-page, one for the text, one for the diagram. However when I use it inside itemize, the bullet point ...
2
votes
0answers
27 views

Easylist inside ntheorem

I want to use easylist inside a ntheorem environment. But it doesn't indent nested lists. Cropped PDF: Minimal example: \documentclass[a4paper]{scrartcl} \usepackage[T1]{fontenc} \usepackage[utf8]{...
1
vote
0answers
39 views

How do I format my theorem environment to fit the itemize?

I study by making summaries of books, and, in order to prevent constructing a narrative, I use the itemize environment to break up chapters, sections and subsections into the essential information. ...
1
vote
2answers
69 views

How to have curly bracket spanning items of Itemize

We already know how to have a curly bracket spanning multiple non-math lines of text: Cf. Curly brackets spanning multiple lines (no math env) | Only 1 curly bracket, at 1 side What I wonder now ...
2
votes
1answer
57 views

Itemize inside Tcolorbox

In the following MWE (Minimal Working Example), an Itemize is placed outside of a Tcolorbox, which compiles fine: \documentclass{article} \usepackage[breakable]{tcolorbox} \makeatletter \newcommand{\...
3
votes
1answer
49 views

Items in columns are not top aligned the same

If I'm using itemize inside a beamer column, the items are not the same way top-aligned as the items without a column. I want the symbols of both items in the images to be at the very same place. \...
1
vote
2answers
72 views

Reorder an itemize

For example, can I assign 2) to item 2 and 1) to item 1? \begin{itemize} \item item 2 \item item 1 \end{itemize} I want reorder an itemize, can I do it? Can I assign a position to any item? Any ...
1
vote
1answer
36 views

Small wrapper for easylist using \item like syntax and a new environment

I'm trying to create a new environment for using the package easylist so that some users that are not used to LaTeX can easily make use of it. Right now the environment and its custom commands are ...
3
votes
1answer
60 views

Styling different levels of itemize with repeating item numbers in ConTeXt

As ugly as this sounds, is it possible to produce a nested itemize list with different styles for each item number? E.g. with the below code: \setupbodyfont[sansserif] \starttext \setupitemize[1][n,...
4
votes
1answer
57 views

\selectlanguage does not change itemize style

I have some trouble with the LaTeX babel package. As you may know, depending on the language, say french or english, it is a normal fact that itemize lists are not displayed in the same style (French ...
2
votes
1answer
105 views

How to itemize equation

I am using beamer for making slides. In one of my slides, equations appear in bullets. I would like the equations to be aligned. Since these appear in different bullets, I can't use the align option. ...
5
votes
1answer
467 views

Why can't I use \pi or \equiv in a list?

The problem comes when I try to use a '\' inside an item tag. In my code: \begin{itemize} \item \pi\textsubscript{k} \item f\textsubscript{k}(x) \equiv .... \end{itemize} both \pi and ...
3
votes
1answer
97 views

Itemize Environment: Change only size of the bullet not the text

I would like to change only the size of the bullet not the text of item as mentioned in the question. I tried following approach but it changes the bullet size as well as text size. Thanks in advance ...
2
votes
0answers
40 views

Bullet and alignment issue in itemize environment [closed]

Itemize environment under the macro is not showing bullet. It's showing dash. Also, there is an issue with horizontal alignment. It's not aligned properly. I already fixed with by using \begin{itemize}...
3
votes
1answer
37 views

How to remove indentation and vertical spaces in list in a table?

I am trying to make a CV and there is a section where I want to list the projects I have done with bullets, so I use itemize list inside a tabularx environment like this: \begin{tabularx}{\linewidth}{...
0
votes
0answers
57 views

How to define a Lyx Layout for Custom Items?

I would like to have a list with two alternative bullets. Using the enumitem-package, I have already created an itemize-environment for one of the two bullets. For the other one, I would use \item[<...
2
votes
2answers
26 views

Set Tabstops independent from line indentation

I want to create a nested list with itemize, with an additional "column" at the right side of the page. I know there are several ways to maketabstops or something similar, but all of them seem to add ...
2
votes
2answers
152 views

Using itemize and enumerate at the same time

I want to have an enumerated list with bullets. So far I've been writing stuff like \documentclass{article} \begin{document} \begin{itemize} \item a. First \item b. Second \end{itemize} \...
1
vote
0answers
22 views

Beamer bullets inside parbox [duplicate]

I don´t know why bullets does not appear inside parbox when I use itemize. Can someone help me? \documentclass{beamer} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage{lmodern} \...
3
votes
2answers
61 views

TODONOTES and \reserved@a - nested itemize/enumerate environments

I am having a problem trying to insert come environments into inline todo notes... This MWE should demonstrate. \documentclass{article} \usepackage{todonotes} \usepackage{verbatim} \begin{document}...
0
votes
1answer
72 views

Aesthetics of enumerations [closed]

I am currently writing my master's thesis and I try to avoid using enumerations as much as I can, as they look rather ugly/unprofessional to me. However, sometimes I can't escape using some them and I'...
2
votes
1answer
20 views

How to stop the line in cventry being in italics

I am using the template for a CV on Overleaf and one of the sections for my academic records uses \cventry, which I like as it makes it look good. https://www.overleaf.com/4565321zzdfbr#/13750580/ ...
0
votes
2answers
47 views

How to avoid underfull boxes in itemize?

I am using an itemize as shown in this example: \begin{itemize} \item \textbf{The First}\\ Some text here over fifty lines.... bla blah \item \textbf{The Second}\\ Other text here ...
4
votes
1answer
75 views

Itemize with alert

I am trying to produce a slide in beamer where each line comes out with alert. This is the code I am currently using: \newenvironment{stepenumerate}{\begin{enumerate}[<+->]}{\end{enumerate}} \...
2
votes
1answer
47 views

Indentation issue of an itemize/enumerate environment in a description environment

I have an itemize environment in a description environment that gives more indentation for the first item. \documentclass[12pt]{article} \begin{document} \section{Acronym rules} \begin{...
0
votes
1answer
39 views

Missing bullets when itemize is justified

Good day, Why bullets disappear when an itemize list is justified? \RequirePackage{flashmovie} \documentclass{beamer} \setbeamertemplate{footline} { \leavevmode% \hbox{% \insertframenumber{...
3
votes
1answer
18 views

Add number or text left of itemize list

I'm trying to find out out to add what I guess is a caption to an itemize list that looks like the following: - Thing - Thing (1) - Thing - Thing - Thing I'm not sure how to achieve ...