{itemize} is about the itemize list environment. If you use this tag, add the more general {lists} tag.

learn more… | top users | synonyms

1
vote
1answer
54 views

Second Beamer columns starts list lower (no overlays) [on hold]

I'm trying to put two lists side-by-side in Beamer columns, but the list items are offset. For some reason, in the second column, the list starts a bit further down. I've tried all sorts of widths ...
5
votes
4answers
168 views

Make notes next to a piece of text (not margin notes) I'm not sure what they're called (image included)

EDIT - I'm not sure what these are called but how would one go about doing something like this in LaTeX : Cheers EDIT #1 This partially works - not very well though \documentclass{book} ...
1
vote
1answer
50 views

Text Alignement under specific items

I want to align my text under the symbol ":" or another, for example I want something like that : First thing : Blablablabla ... Blablabla Second : blablablabla blabla ...
7
votes
2answers
76 views

possible memoir bug with font sizes and \tightlists

It looks to me like memoir is not honoring \tightlists for certain font sizes (nor firmlists, btw). A picture is worth a thousand words: The source code for the screenshot is included below. You ...
6
votes
1answer
77 views

How to focus on some items?

I have 3 items in beamer as follows: \frame{\frametitle{Frame1} \begin{itemize} \item<1> Self-X1, $\cdots$. \item<2, 4-> \color<4>{red}{Self-X2}, $\cdots$. ...
3
votes
2answers
40 views

How to change the list structure indentation?

In the example below, the item "Long item text" will be wrapped to the next line if it exceeds the width. But this continued second line is further indented to the same extent as "Item description" ...
4
votes
1answer
35 views

Implement shortcut in LyX for Itemize environment nested under Lemma

I want to implement a shortcut in LyX that I can use to insert my own itemize environment. Well, the reason for implementing is the following: because when you want to add a itemize environment the ...
1
vote
1answer
27 views

Beamer: always overlay first item on same frame

I've read and tried to follow instructions from similar questions but I can't seem to get my slide to work the way it should. I basically have an itemize block and I want my list items to show ...
3
votes
1answer
48 views

Spacing around itemize in tabular

I'm working off of a resume template from writelatex.com. I'd like to use bullet points in my descriptions, rather than flowing text. However, it adds a bit to the separating line, as seen in item 1. ...
4
votes
3answers
64 views

Positioning of tcolorbox in list enviroment

For emphasis some key features in my texts I use tcolorbox, which is pushed to the outside border. in normal text this work fine but in itemize environment it is pushed more outside then I desire. ...
4
votes
1answer
21 views

How to modify the code `legal` in order to add some more lines to the items

Hi I want to add some lines in this code in order to have something like this: First item ------------------------------------------------------------------------ ...
3
votes
3answers
1k views

How to have an itemize inside a tabularx

I am trying to have an itemize inside one of the columns in a tabularx, but when trying to compile this code: \begin{table} ...
1
vote
0answers
49 views

When I write sucessives numbers in squares delimeters inside itemize environment, do not compile [closed]

When I write sucessives numbers in squares delimeters inside itemize environment, do not compile. This is my code. \documentclass[aspectratio=169,draft]{beamer} \usepackage{beamerthemeshadow} ...
0
votes
1answer
64 views

I need this tikz and tabular sketch at the right of my presentation, and an itemize at left, but too much length

I need this tikz and tabular sketch at the right of my presentation, and some text at left. Unfortunatly the text is at left but in the down part of my frame, I need it at the center and starting ...
3
votes
2answers
41 views

itemize within tabularx does not work when ltablex is loaded

I need this code to be compilable without errors: \documentclass{article} \usepackage{tabularx} \usepackage{amsmath, mathdots, paralist} \usepackage{ltablex} % uncommenting this line will work ...
27
votes
2answers
13k views

Changing left margin in itemize environment of beamer class

I can't figure out how to line up the symbols of an itemize environment in beamer with the left part of the main text. In other words, I would like to supress the left margin in beamer itemize lists. ...
0
votes
2answers
40 views

How can I indent paragraphs within an itemize environment?

I'm sorry to ask such a simple question, but I've been searching around without finding a simple way to make each new paragraph indent when I'm in the \itemize environment. Number 6 on this document ...
2
votes
2answers
39 views

Make an item in itemize disappear if a condition is not met

Here is the MWE: \documentclass{article} \newcommand{\VarOne}{1500} \begin{document} I want this list to have item Two if VarOne is more than 1000. If it is not, this will be a two item list. By the ...
4
votes
2answers
75 views

New/blank line in itemize

I have an itemize area with several point inside it. I want to have the following result: - one - two - three Is there is an appropitate way to do so? As a workaround I used the following code to ...
3
votes
1answer
169 views

Completely hide bullet when using itemize

When using the following command \begin{itemize} \item[] foo \item[] bar \end{itemize} I guess the margins around the bullets are still visible, and thus my items seem to be indented. How can I ...
6
votes
1answer
119 views

Enumerate within TikZ node

Compiling the following code with pdflatex: \documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture}[remember picture, overlay] \draw (current page.center) node { ...
8
votes
3answers
114 views

How to split item in itemize over two lines

I have to use the document set up with the packages shown because this is dictated by the journal. I simply want to prevent the item shown below from disappearing off the right hand side of the page. ...
8
votes
2answers
1k views

Changing the colour of the text with itemize

I'm creating my own beamer theme. I can change the colour of the bullets using \setbeamercolor{}. But how can I change the colour of the text after the bullets? I would like to use it in a .sty file. ...
2
votes
1answer
50 views

Putting labels to itemize makes beamer slide overflow on right margin

MWE: \documentclass{beamer} \usetheme{Madrid} \begin{document} \begin {frame}{Upper gastro-intestinal endoscopy } \begin{itemize} \item[Esophagus] Four columns of grade IV esophageal varices ...
2
votes
1answer
39 views

Rounded corner box in itemized environment

Here is the MWE: \documentclass{article} \usepackage{tikz} \newcommand{\rbox}[1]{ \begin{tikzpicture}[remember picture, overlay] \node[rounded corners=3pt, draw]{#1}; ...
3
votes
2answers
58 views

Different colours (>2) for the bullets in itemize environment

I would like to have a itemize list using several different item colors, at least three. Basically something like described here taking the direction Alan Munn suggested: \documentclass{article} ...
1
vote
0answers
45 views

Definition of itemize spacing flags

There are numerous questions on SE (and elsewhere) asking how to change list environment spacings, but a lot of bad, ad hoc answers. The best answer is to use the enumitem package, which allows one ...
0
votes
0answers
40 views

Itemize a text with many lines without writing 'item' explicitly at the beginning of every line

Ok, this may be an easy one but I've been googling a lot without success. I have a long text with many lines separated by the new line character. What I want to do is itemize this text so that every ...
5
votes
4answers
898 views

Is it possible to use the enumerate/itemize environment within the proof/remark environment in a nice way?

I wish to use the enumerate/itemize environment within the proof/remark environment, but when I do this the first number/bullet-point is on the same line as the word 'Remark'/'Proof' indented to the ...
2
votes
1answer
67 views

Same page number for slides using itemize

Is the Antibes theme the problem here? according to this post, the solution I put in my MWE (below) should do the trick but it doesn't. This answer doesn't work either. I got no error whatsoever, it ...
6
votes
2answers
69 views

Handling tedious casework

I'm typesetting a math paper, where at many points I need to break proofs into several cases. I've been putting these just in an itemize environment, but this is a confusing, because things like ...
2
votes
1answer
53 views

marginpar in a macro steal the bullet of itemized list

I have an odd (to me) problem involving an itemize environment and \marginpar{}. The problem is illustrated in the following document: \documentclass{article} ...
3
votes
1answer
45 views

itemize environment inside theorem

When I have an itemize environment inside a theorem and refer to the theorem later on, the document doesn't point to the right location. For example, consider the following toy example: ...
6
votes
1answer
54 views

Conditionally inherit color in beamer

I'd like to change the fg color of the item symbol in beamer. In normal text it should be, e.g. yellow but inside an exampleblock or alertblock it should inherit from the block title.fg. Here is a NWE ...
4
votes
1answer
55 views

Follow-on to tabulary + longtable + captioning

I was able to use the coding provided by Justibus: Several caption problems in longtable and tabulary. What my question is - now that i've been able to make my table wrap columns and break over ...
2
votes
1answer
136 views

How can I decrease the indent of itemize inside a column in Beamer [duplicate]

I am using a package Beamer to create my presentation file. But I need to have some itemize information along with a table, in two different column. But the final shape is not good. I want to reduce ...
3
votes
1answer
39 views

Help for a complicated macro: breaking pages at custom places and itemize environment

In this answer, there is a macro that allows one to have a precise control of the page lengths of a document. This macro is too complicated for me and I have found a problem with it. It behaves ...
2
votes
1answer
53 views

Problem with vertical spacing of equations in itemize after the first \item

I found one similar thread here (Removing strange vertical space after first (customized) \item), but I still could not resolve my problem. Please help. Description of the problem: I used beamer ...
0
votes
1answer
59 views

How to reduce indentation in itemize?

I have an itemize block in my latex code (XeTex actually). I wish to reduce the indentation of a multi line item. Can you please help me with this? My code and how it looks are below. ...
3
votes
1answer
742 views

Itemized list is appearing outside of margins

I am writing a memoir document with a subsection that contains a itemized list. This itemized list is not appearing within the margins of text, but instead starts somewhere unknown and only has the ...
2
votes
0answers
26 views

List spacing being ignored in parcolumns enviroment

I am trying to make a 2 column resume using parcolumns but I am having a problem where any changes I make to the itemize or description environments are ignored if they are inside the parcolumns ...
0
votes
0answers
32 views

Texmaker keyboard shortcuts to move up/down item in list?

Is there any keyboard shortcut to move an item up or down a list within an enumerate/itemize or outline environment, using Texmaker in Win7? For instance EMACS in org-mode has M-↓↑ (up/down arrow) to ...
2
votes
2answers
54 views

itemize in table without excess space

I am trying to create a list of bullet points in a tabular environment. When I use itemize, the line separating different jobs on my cv is no longer separated. When I manually use cdot however, the ...
3
votes
2answers
24 views

References for asparenum enviroment with counters dependable from section

guys! I'm writing math lectures using my own enviroment for definitions: \newenvironment{mydefs} {\begin{asparaenum}[\P\slshape\thesection.a]} {\end{asparaenum}} So every definition is numbered ...
2
votes
1answer
175 views

Beamer (Boadilla theme): Color of itemize subitems inside blocks

When using the "Boadilla" theme in the beamer package, I noticed that the bullets of subitems in the itemize environment have different colors inside block environments than outside. The problem is ...
18
votes
1answer
13k views

How to remove the whitespace BEFORE itemize/enumerate?

I'm somewhat of a LaTeX noob, and this is driving me completely nuts. When I type \documentclass{article} \usepackage{enumitem} \begin{document} Some text \begin{itemize}[noitemsep] ...
4
votes
2answers
115 views

How to achieve multicolumn item lists with independent content?

I need three item lists next to each other, with a centered heading for each list. Using the multicol-package doesn't seem to fit my needs as it doesn't allow me to fill my columns independently, does ...
3
votes
1answer
57 views

How to define the indentation for the second line of a multiline item with custom label?

I have a multicolumn list and I am a little limited in vertical space, for that reason I used the property leftmargin=* of itemize to get rid of some of the white space between the custom label and ...
3
votes
1answer
45 views

How to stop nested itemizes being “again covered” in beamer-class

I'm using \setbeamercovered with transparency for "still covered" and "again covered" to make the current points pop out more. But when using an itemize in an itemize the points of the inner itemize ...
10
votes
3answers
748 views

How to start itemize on same line as text?

I've created a new environment called 'Example' like this: \newenvironment{example} {\textbf{Example:} \begin{itemize}} {\end{itemize}} The environment works fine, but the items are ...