{itemize} is about the itemize list environment. If you use this tag, add the more general {lists} tag.

learn more… | top users | synonyms

2
votes
1answer
91 views

\emph gets lost in beamer class when used within italic or bold text

I use the beamerclass in Latex. Using \emph has worked fine so far. Now I want to use \emphwithin a bold (\textbf) and an italic (\textit) sentence. However, the output seems to ignore the emphases. ...
1
vote
0answers
28 views

Enumerate text crosses the boundaries

I have simple enumeration (using enumitem package) with disabled hyphenation. \documentclass[12pt, oneside]{extarticle} \usepackage[a4paper, left=3cm, right=1.5cm, top=2cm, bottom=2cm, ...
3
votes
1answer
49 views

Extra spacing above items

I am trying to put list items inside a table. So far everything is fine except the fact that there exists large margin above and below the itemlist. I want to reduce that margin. I didn't define any ...
4
votes
2answers
82 views

Indentation of the second line in a very lone sentence after \textbullet WITHOUT itemize environment

I have a very long sentence after a \textbullet. Because it is very lone, it goes to the second line. But there is no indentation in the second line. How could I add indentation and align the second ...
2
votes
0answers
68 views

Itemize list misaligned in Moderncv

EDIT: Updated Tex Live and problem no longer occurs. Thanks! -- Im writing my CV with the moderncv class. When I insert a list in a cventry the bullet points in the description don't line up with ...
1
vote
1answer
60 views

Vertically align the bullet image and bullet text

After I change the bullet symbol of an item to be an image, it seems the bottom of the image is aligned with the top of the bullet text. A minimal example below (note.png): \documentclass{article} ...
1
vote
1answer
136 views

How to have a cvlisttripleitem in moderncv?

The moderncv package comes with a lot of builtin command. One I think is usefull is the \cvlistitem and \cvlistdoubelitem when items to list are smalls and fit on two columns. But what should I do ...
0
votes
2answers
25 views

insert greek letter in enumerate list [duplicate]

When I type \alpha my list get crazy...What I am doing wrong? \documentclass[a4paper,12pt]{article} \pagestyle{empty} \usepackage{color} \usepackage{ifxetex} ...
2
votes
3answers
135 views

How to itemize as [1], [2] in LaTeX? [duplicate]

I want to itemize as [1] sentences [2] sentences.... But if I type \begin{description} \itemsep -2pt % Reduce space between items \item[[1]] sentences \end{description} in latex, it appears ...
4
votes
2answers
69 views

Overlays with images in beamer

I would like to implement the following ``Algorithm" in one SLIDE ! \documentclass[serif]{beamer} \begin{document} \begin{frame} Step 1: Show some text \begin{itemize} Step 2 \item ...
2
votes
1answer
25 views

I am having some trouble making a newline in itemize section, unfortunately \newline \parbox \par or \\ is not working

\documentclass[11pt,a4paper,sans]{moderncv} \moderncvstyle{banking} \moderncvcolor{blue} \usepackage[utf8]{inputenc} ...
2
votes
1answer
69 views

Lists mixed with tabular in latex

I have a large table where the first column is a list of items (using both itemize and enumerate) and the second and third columns are values relative to each item in the first column. I'm trying to ...
4
votes
1answer
254 views

Vertical space inserted before itemize environment at the top of a minipage in beamer

See bottom for an updated MWE and more analysis after touhami's feedback. The problem I'm seeing is that an itemize environment at the top of a beamer column (columns with [t] alignment) introduces a ...
3
votes
1answer
60 views

Removing space resulting from newcommand definition

My document is a list of entries. Here is an example with three entries: All entries have a title and two subtitles. These are followed by text, bullet points or a combination of the two. Note that ...
6
votes
1answer
78 views

itemize, mbox and unwanted line break

I have a slide in the beamer package with an itemize environment where some items slightly are too wide to fit in one line (according to LaTeX' automatic line break system). This is the code: ...
3
votes
4answers
389 views

Remove space before itemize

I have defined a \newcommand called \NewEntry that takes two parameters and prints one above the other. \newcommand{\NewEntry}[2]{ #1 \\ #2 } Calling this command by \NewEntry{ENTRY} ...
2
votes
1answer
46 views

Add vertical spacing of a long sentence in description

code \documentclass[12pt]{article} \usepackage{amsmath,amsthm,amssymb,amsfonts} \usepackage{enumitem} \begin{document} \begin{description} \item [First] This is a short sentence. \item ...
2
votes
1answer
37 views

Itemize and overlay

I've two levels of "itemize". Every second level of itemize is related to a first level. I would like the second level to fold when I pass from a first level bullet point to another. In the following ...
3
votes
1answer
67 views

Getting the theme's itemize bullet in beamer?

I was wondering if there is a way to get the itemize bullet symbol defined by the theme in beamer. More precisely, I'd like to manually place the bullet symbol somewhere in the text. One option is ...
3
votes
1answer
84 views

resume doesn't format well

So here is the link to tex file of my resume and here is how it is shown: As you see, things like Research and Honors and Awards are clipped. Anyway you can help me to fix it?
1
vote
0answers
48 views

Beamer: Top alignment of enumerations in columns [closed]

I want to place two item lists beside each other on the top of a slide. However the following minimal code example creates misaligned item lists at the top. How do I align them properly? I am using ...
2
votes
1answer
107 views

Beamer overlay with columns - changing image and highlighting text

I am making a presentation to explain an algorithm which produces a picture. I want to use two columns to have the picture on one side and the algorithm on the other. I want to click through the ...
1
vote
1answer
186 views

Drawing a circle around text within itemize and enumerate on a beamer slide

I have the following code that defines a single frame of a beamer presentation: \begin{frame}{Focus on Merkel Cells} \begin{itemize} \item \textbf{1875}: Merkel cells discovered by Friedrich ...
2
votes
1answer
130 views

Placing figure inside itemize environment with text floating around it

I want to creat a slide with a logo at the right and the logo is supposed to start with item one in an itemize environment and extend down to item three. This is what I have: I used floatflt for ...
2
votes
1answer
28 views

beamer: three figs<+-> side-by-side, coordinated with itemize<+->

In a beamer slide using overlays, I want two show three items in an itemize environment sequentially, and have a corresponding figure appear, respectively, left, center and right. In my MWE, below, ...
1
vote
1answer
83 views

Spacing between lines with bullets

How to reduce spacing between lines with bullets? \item[$\bullet$ Text1] \item[$\bullet$] Text2 What command will include spacing between the lines generated by the above?
1
vote
1answer
66 views

Horizontal and Vertical spacing in itemize environment

I am trying to adjust the itemize environment. With the following code I get a result as seen below: \documentclass[a4paper,9pt]{extarticle} ...
0
votes
2answers
88 views

Remove whitespace above and below itemize in a table [duplicate]

I have a table where some cells contain a bulleted list produced by itemize. I want to present these lists in a compact way. I use the enumitem package and \setlist[itemize]{nosep} (plus other ...
1
vote
0answers
74 views

What kind of hyphen/dash should I use instead of bullets in itemize lists? [closed]

Bullets are cute, but I don't really like them for my \itemize lists (in Comp Sci papers, written in English). I want something more, shall we say, drab, humdrum, pizzazz-less... :-) Anyway, I was ...
3
votes
1answer
75 views

How can I make enumitem's setlist command apply to compactitem?

I'm writing a paper using the compactitem environment from the paralist package. I want to use something other than bullets as a default list item indicator; now, this: \usepackage{enumitem} ...
1
vote
1answer
64 views

Ignore indent of itemize for figures, lstlistings etc

I have a list of items where some of the items contain figures, listings, etc. How can I make these environments ignore the additional indent in an itemize environment? My code looks like this: ...
1
vote
1answer
36 views

why isn't this properly formatted using \item \LHEAD?

I followed the answer given by AboAmmar here by I get the following shape for my resume. Not sure why the items written in LHEAD show like that? %\documentclass[9pt,A4paper]{report} ...
2
votes
3answers
142 views

Add bold font to the itemize environment

I am trying to list some items in my document so that I can add bold option to the words in the item such as below: src contains the activities as well as the java code. gen contains the ...
1
vote
3answers
125 views

How to expand macro in a macro call

How can I expand a macro inside an optional argument list \newcommand{\sss}{% label={$\bullet$},topsep=0mm, parsep=0mm,% leftmargin=3mm,rightmargin=0cm,labelwidth=5mm,labelsep=3mm% } ...
1
vote
0answers
51 views

How to have an itemized list vertically in par with its heading

I'm trying to vertically align these two but the itemized list seems to start from the next line. How could I make them look in the same line? ...
2
votes
1answer
42 views

gap between first and second tier of a list

i use the itemize environment in my document to make listings. since i don't want the listings to take so much space, i always use \itemsep-10pt. However the gap between the first and second level of ...
3
votes
1answer
60 views

Adjusting the counter of \startitemize environment

I tried to find this answer on tex.stackexchange.com, the ConTeXt Garden wiki and the ConTeXt reference manual, and I feel like I must be overlooking something simple. Basically, I have a list of ...
0
votes
0answers
201 views

Something's wrong--perhaps a missing \item in PDFLaTeX

I am trying to make a CV in LaTeX. I am already finding out it's a waste of time, but since I'm almost done I want to finish it. I have this code: \section{Section name} \tabbedblock{ \bf{2004-2012} ...
5
votes
1answer
159 views

I want to make a list of items and sub-items with the first item number of my choice

While writing a list, how can I get the following as output: N.1 String 1 N.2 String 2 N.3 String 3 N.3.1 String a N.3.2 String b etc. Here N is the number of my choice.
0
votes
2answers
88 views

Line breaking with hyperref href with an underline in itemize

I have a simple itemized list like the following MWE: \documentclass[10pt,a4paper]{article} \usepackage[utf8]{inputenc} \usepackage{amsmath} \usepackage{amsfonts} \usepackage{amssymb} ...
4
votes
1answer
59 views

Item with subitems appearing at once in beamer

In my presentation I have itemized list and sub-lists I represent them as follows \begin{itemize}[<+->] \item {ONE} \begin{itemize} \item {B} \item{C} \end{itemize} \item ...
0
votes
1answer
48 views

Error in aligning text in bullet style

This is follow-up question from my previous OP. I want to format my article like the picture below: I create my document like this format and I put the above text in Chapter 2. Harish Kumar gave me ...
4
votes
1answer
217 views

Aligning text in bullet style

I want to format my article like the picture below: Raw text: Before scientists can develop medicines or engineers can advance technology, they throw numbers onto whiteboards using concepts laid ...
1
vote
1answer
108 views

Line spacing for all enumerate / itemize blocks (beamer)

I just wonder, how it is possible to increase the spacing between between each bullet-item (item line) using beamer? Is it possible to adjust the line spacing with defbeamertemplate or ...
5
votes
4answers
312 views

How to put curly brace in front of even number of bullets?

I need to put curly braces in front of even number of bullets. The following post works perfectly for odd number of bullets. Bullet points and curly braces how can we modify it to for even number ...
4
votes
1answer
55 views

Gray dots in itemize

Using itemize, how can I use a gray big dot as \item instead of the black one by default?
1
vote
2answers
133 views

beamer bullet outside itemize with different colour

I'm trying to define a new item, it is exactly the same of the beamer bullet point but I want to change the colour, ho can I do? This is the code, is there anyway to make the two colours of the ...
1
vote
2answers
90 views

How to continue hierarchy of bullets in new slide?

I have some hierarchy in one slide that i want to keep in the follow slide. How i can do that? Code example: \documentclass[ps,clariphy]{prosper} %% clariphy it's the company where I work. I Think ...
1
vote
1answer
74 views

Squeeze items with itemize

I feel that I can save some lines in the following list, but I do not know how. The split made at broadband networks is something I would like to avoid for example. Here is the minimal example: ...
4
votes
3answers
167 views

Uneven spacing using \vspace inside \itemize in beamer

I have a slide that is just an itemize. I am using \vspace{.5cm} to space things out. For some reason between two of the bullets the spacing is larger than the others and I have to use ...