{itemize} is about the itemize list environment. If you use this tag, add the more general {lists} tag.

learn more… | top users | synonyms

10
votes
4answers
243 views

emacs+auctex: prevent region filling when inserting itemize

When inserting an itemize environment around some text (using C-c C-e) AucTeX insists on doing paragraph-filling on said text, which messes up my layout. Is there a simple way to prevent that ? ...
6
votes
4answers
2k views

How can I mix itemize and tabular environments?

I have the following list: \begin{itemize} \item És associativa:$\qquad(x+y)+z=x+(y+z)$ \item És commutativa:$\qquad x+y=y+x$ \item Té element neutre:$\qquad\exists 0\in\K : 0+x=x+0=x$ ...
1
vote
5answers
759 views

Left align labels in itemize

I want my itemize environment to output something like Email: my@email.com Address: Street name City Country Phone: My phone number I have tried using \usepackage{...
12
votes
3answers
3k views

How to start itemize on same line as text?

I've created a new environment called 'Example' like this: \newenvironment{example} {\textbf{Example:} \begin{itemize}} {\end{itemize}} The environment works fine, but the items are ...
1
vote
0answers
94 views

Align beamer slides with frame breaks

As addressed in First slide of references in beamer starts one line further down, a bibliography across several slides is not vertically aligned from the first slide to the next. In that case, it ...
2
votes
1answer
52 views

Bullets and Enumeration in meetingmins, hiddenitems

I am relatively new to using the meetingmins class, and overall I'm very pleased with it. However, the hiddenitems default to being enumerated and sometimes I want them to be bulleted. Can someone ...
1
vote
1answer
46 views

Aligned Equations With Itemized Number [duplicate]

I have been trying to make the aligned equations in the same line with item number. I have tried array, aligned, alignat, and eqnarray, but they dont work out for me. The picture is from align* ...
2
votes
2answers
87 views

Lists don't work with the abntex2 class and paralist package (a memoir based one)

I'm writing a research project using the abntex2 class, which was built over memoir. Everything was fine until I found out that lists (itemize, description, enumerate) weren't working anymore... I'...
1
vote
2answers
677 views

Size of the bullet using \itemize

I was wondering what is the (standard) size of the bullets that appear using the itemize environment: \begin{itemize} \item ABC \end{itemize} Is it \small, \tiny...? Is there any way to ...
2
votes
1answer
271 views

\emph gets lost in beamer class when used within italic or bold text

I use the beamerclass in Latex. Using \emph has worked fine so far. Now I want to use \emphwithin a bold (\textbf) and an italic (\textit) sentence. However, the output seems to ignore the emphases. ...
1
vote
0answers
29 views

Enumerate text crosses the boundaries

I have simple enumeration (using enumitem package) with disabled hyphenation. \documentclass[12pt, oneside]{extarticle} \usepackage[a4paper, left=3cm, right=1.5cm, top=2cm, bottom=2cm, bindingoffset=...
4
votes
2answers
135 views

Indentation of the second line in a very lone sentence after \textbullet WITHOUT itemize environment

I have a very long sentence after a \textbullet. Because it is very lone, it goes to the second line. But there is no indentation in the second line. How could I add indentation and align the second ...
3
votes
1answer
61 views

Extra spacing above items

I am trying to put list items inside a table. So far everything is fine except the fact that there exists large margin above and below the itemlist. I want to reduce that margin. I didn't define any ...
2
votes
0answers
146 views

Itemize list misaligned in Moderncv [closed]

EDIT: Updated Tex Live and problem no longer occurs. Thanks! -- Im writing my CV with the moderncv class. When I insert a list in a cventry the bullet points in the description don't line up with ...
1
vote
1answer
114 views

Spacing between lines with bullets

How to reduce spacing between lines with bullets? \item[$\bullet$ Text1] \item[$\bullet$] Text2 What command will include spacing between the lines generated by the above?
1
vote
1answer
104 views

Vertically align the bullet image and bullet text

After I change the bullet symbol of an item to be an image, it seems the bottom of the image is aligned with the top of the bullet text. A minimal example below (note.png): \documentclass{article} \...
4
votes
1answer
339 views

Vertical space inserted before itemize environment at the top of a minipage in beamer

See bottom for an updated MWE and more analysis after touhami's feedback. The problem I'm seeing is that an itemize environment at the top of a beamer column (columns with [t] alignment) introduces a ...
1
vote
1answer
372 views

How to have a cvlisttripleitem in moderncv?

The moderncv package comes with a lot of builtin command. One I think is usefull is the \cvlistitem and \cvlistdoubelitem when items to list are smalls and fit on two columns. But what should I do ...
0
votes
2answers
33 views

insert greek letter in enumerate list [duplicate]

When I type \alpha my list get crazy...What I am doing wrong? \documentclass[a4paper,12pt]{article} \pagestyle{empty} \usepackage{color} \usepackage{ifxetex} \ifxetex\usepackage{fontspec}\setmainfont[...
2
votes
3answers
260 views

How to itemize as [1], [2] in LaTeX? [duplicate]

I want to itemize as [1] sentences [2] sentences.... But if I type \begin{description} \itemsep -2pt % Reduce space between items \item[[1]] sentences \end{description} in latex, it appears ...
4
votes
2answers
92 views

Overlays with images in beamer

I would like to implement the following ``Algorithm" in one SLIDE ! \documentclass[serif]{beamer} \begin{document} \begin{frame} Step 1: Show some text \begin{itemize} Step 2 \item ...
2
votes
1answer
83 views

Lists mixed with tabular in latex

I have a large table where the first column is a list of items (using both itemize and enumerate) and the second and third columns are values relative to each item in the first column. I'm trying to ...
2
votes
1answer
28 views

I am having some trouble making a newline in itemize section, unfortunately \newline \parbox \par or \\ is not working

\documentclass[11pt,a4paper,sans]{moderncv} \moderncvstyle{banking} \moderncvcolor{blue} \usepackage[utf8]{inputenc} \...
14
votes
1answer
8k views

Using the itemize environment inside a caption

The following code does not compile. However, if I remove the itemize environment it does. I googled for this problem, and found suggestions that using the caption package would solve the problem, ...
3
votes
1answer
74 views

Removing space resulting from newcommand definition

My document is a list of entries. Here is an example with three entries: All entries have a title and two subtitles. These are followed by text, bullet points or a combination of the two. Note that ...
6
votes
1answer
162 views

itemize, mbox and unwanted line break

I have a slide in the beamer package with an itemize environment where some items slightly are too wide to fit in one line (according to LaTeX' automatic line break system). This is the code: \...
3
votes
4answers
1k views

Remove space before itemize

I have defined a \newcommand called \NewEntry that takes two parameters and prints one above the other. \newcommand{\NewEntry}[2]{ #1 \\ #2 } Calling this command by \NewEntry{ENTRY} {\...
2
votes
1answer
67 views

Add vertical spacing of a long sentence in description

code \documentclass[12pt]{article} \usepackage{amsmath,amsthm,amssymb,amsfonts} \usepackage{enumitem} \begin{document} \begin{description} \item [First] This is a short sentence. \item [Second] ...
2
votes
1answer
53 views

Itemize and overlay

I've two levels of "itemize". Every second level of itemize is related to a first level. I would like the second level to fold when I pass from a first level bullet point to another. In the following ...
3
votes
1answer
95 views

Getting the theme's itemize bullet in beamer?

I was wondering if there is a way to get the itemize bullet symbol defined by the theme in beamer. More precisely, I'd like to manually place the bullet symbol somewhere in the text. One option is ...
3
votes
1answer
164 views

How can I make enumitem's setlist command apply to compactitem?

I'm writing a paper using the compactitem environment from the paralist package. I want to use something other than bullets as a default list item indicator; now, this: \usepackage{enumitem} \setlist[...
3
votes
1answer
119 views

resume doesn't format well

So here is the link to tex file of my resume and here is how it is shown: As you see, things like Research and Honors and Awards are clipped. Anyway you can help me to fix it?
12
votes
2answers
10k views

How to do a line break after an itemize?

The question is in the title. I've \begin{itemize} \renewcommand{\labelitemi}{$\bullet$} \item item1 ... \item item2 .... \end{itemize} New ...
1
vote
0answers
52 views

Beamer: Top alignment of enumerations in columns [closed]

I want to place two item lists beside each other on the top of a slide. However the following minimal code example creates misaligned item lists at the top. How do I align them properly? I am using ...
1
vote
1answer
522 views

Drawing a circle around text within itemize and enumerate on a beamer slide

I have the following code that defines a single frame of a beamer presentation: \begin{frame}{Focus on Merkel Cells} \begin{itemize} \item \textbf{1875}: Merkel cells discovered by Friedrich ...
2
votes
1answer
252 views

Placing figure inside itemize environment with text floating around it

I want to creat a slide with a logo at the right and the logo is supposed to start with item one in an itemize environment and extend down to item three. This is what I have: I used floatflt for ...
1
vote
0answers
149 views

What kind of hyphen/dash should I use instead of bullets in itemize lists? [closed]

Bullets are cute, but I don't really like them for my \itemize lists (in Comp Sci papers, written in English). I want something more, shall we say, drab, humdrum, pizzazz-less... :-) Anyway, I was ...
2
votes
1answer
36 views

beamer: three figs<+-> side-by-side, coordinated with itemize<+->

In a beamer slide using overlays, I want two show three items in an itemize environment sequentially, and have a corresponding figure appear, respectively, left, center and right. In my MWE, below, ...
1
vote
1answer
116 views

Horizontal and Vertical spacing in itemize environment

I am trying to adjust the itemize environment. With the following code I get a result as seen below: \documentclass[a4paper,9pt]{extarticle} \usepackage[a4paper,left=2.4cm,right=1.4cm,top=1.4cm,...
4
votes
1answer
273 views

Aligning text in bullet style

I want to format my article like the picture below: Raw text: Before scientists can develop medicines or engineers can advance technology, they throw numbers onto whiteboards using concepts laid ...
0
votes
2answers
155 views

Remove whitespace above and below itemize in a table [duplicate]

I have a table where some cells contain a bulleted list produced by itemize. I want to present these lists in a compact way. I use the enumitem package and \setlist[itemize]{nosep} (plus other ...
21
votes
2answers
5k views

Preventing itemize environment to insert initial vertical space

I'm using itemize and tables like the following \begin{tabularx}{\textwidth}{>{\ttfamily}llX} \toprule \textbf{\rmfamily Operator} & \textbf{Typen} & \textbf{Regel} \\ \midrule = & ...
19
votes
4answers
20k views

Is there a standard way to title a list of bullets?

Is there a standard way to give a list of bullets a title in LaTeX? For instance, if I wanted something akin to this: Pros: Pro 1 Pro 2 Etc. Cons: Con 1 Con 2 Etc.
1
vote
1answer
94 views

Ignore indent of itemize for figures, lstlistings etc

I have a list of items where some of the items contain figures, listings, etc. How can I make these environments ignore the additional indent in an itemize environment? My code looks like this: \...
1
vote
1answer
42 views

why isn't this properly formatted using \item \LHEAD?

I followed the answer given by AboAmmar here by I get the following shape for my resume. Not sure why the items written in LHEAD show like that? %\documentclass[9pt,A4paper]{report} \...
2
votes
3answers
288 views

Add bold font to the itemize environment

I am trying to list some items in my document so that I can add bold option to the words in the item such as below: src contains the activities as well as the java code. gen contains the ...
1
vote
2answers
169 views

How to expand macro in a macro call

How can I expand a macro inside an optional argument list \newcommand{\sss}{% label={$\bullet$},topsep=0mm, parsep=0mm,% leftmargin=3mm,rightmargin=0cm,labelwidth=5mm,labelsep=3mm% } \begin{itemize}[...
1
vote
0answers
66 views

How to have an itemized list vertically in par with its heading

I'm trying to vertically align these two but the itemized list seems to start from the next line. How could I make them look in the same line? \newcommand{\mhead}[1]{\leavevmode\marginpar{\sffamily\...
2
votes
1answer
49 views

gap between first and second tier of a list

i use the itemize environment in my document to make listings. since i don't want the listings to take so much space, i always use \itemsep-10pt. However the gap between the first and second level of ...
3
votes
1answer
73 views

Adjusting the counter of \startitemize environment

I tried to find this answer on tex.stackexchange.com, the ConTeXt Garden wiki and the ConTeXt reference manual, and I feel like I must be overlooking something simple. Basically, I have a list of ...