{itemize} is about the itemize list environment. If you use this tag, add the more general {lists} tag.

learn more… | top users | synonyms

5
votes
4answers
197 views

How to put curly brace in front of even number of bullets?

I need to put curly braces in front of even number of bullets. The following post works perfectly for odd number of bullets. Bullet points and curly braces how can we modify it to for even number ...
5
votes
2answers
689 views

How to modify itemize vertical spacing within blocks in beamer?

I have noticed that when I have "itemize" environments defined within blocks in beamer, that they introduce more vertical spacing between the top and the bottom of the blocks, than vertical text. ...
5
votes
3answers
4k views

Remove Bullet Symbols from List

I have to typeset a document which contains several dozen lists which are already numbered. For various reasons, I cannot use LaTex's enumerate automatic numbering feature for these lists--the numbers ...
5
votes
3answers
1k views

Change the bullet of each \item

Sorry, may be the title is not clear. In fact, I need to make a list of advantages and disadvantages and I want to note the advantages as + and disadvantages as -. How can I change the full circle of ...
5
votes
3answers
205 views

Itemize equation with bullets

I am trying to place an equation ''inside'' itemize environment. Basically I would like to avoid using \begin{cases} and just represent the equation by using itemize (one bullet for each case) ...
5
votes
1answer
111 views

I want to make a list of items and sub-items with the first item number of my choice

While writing a list, how can I get the following as output: N.1 String 1 N.2 String 2 N.3 String 3 N.3.1 String a N.3.2 String b etc. Here N is the number of my choice.
5
votes
2answers
200 views

Change the color of a single itemize item — command to do that?

My question concerns itemize items in Beamer slides. I want to obtain the following slide: This has been produced by the code: \documentclass{beamer} \begin{document} \begin{frame}{Title} ...
5
votes
5answers
172 views

Place a list in the middle of the page

I have an itemized list: \begin{itemize} \item First item \item Second item \end{itemize} I'd like to place this list somewhere near the center of the page. But, I still want the bullet ...
5
votes
2answers
2k views

How to reduce vertical space itemize environment inside table

I have this: I want for the first item to be vertically aligned with my other cells. How can I do it? The answers provided here suggested to play with topsep and partopsep: How can I change ...
5
votes
2answers
4k views

Variable itemize indentation on Beamer slides

I'm not sure if what I want is possible at all, but asking doesn't hurt... I've adjusted the itemize environment so that the item text is aligned with the text outside the environment. This might ...
5
votes
1answer
1k views

Cleanest way to make itemize ragged right?

I want to make my itemize text ragged right. Is there a cleaner way than to redefine the \@item[#1]{...} from latex.ltx? This is what I have done now: \def\@item[#1]{% \if@noparitem ... ...
5
votes
2answers
1k views

\pause messes up the page layout

I'm having a frame in beamer which compiles just right when I do not use pauses (\pause). However, when I pause the different list items, the last items do not appear on the frame anymore (actually, ...
5
votes
3answers
122 views

Lyx itemize returning to last number

I would like to have the following output: Text (a) Text Text Text That is, after a subitem, I want to return to the last number without creating a new one. Is there any way to do this without ...
5
votes
1answer
807 views

I get dashes instead of bullets in \itemize

When I use \begin{itemize} ... \end{itemize}, the items are displayed as dashes. But I want them to be displayed by bullets. Those are my headers: \documentclass[11pt]{llncs} \usepackage{amsfonts} ...
5
votes
1answer
187 views

itemize environment with a bracket

I want to enclose an itemize environment with a bracket inside an itemize environment. \documentclass[a4paper]{article} \usepackage{enumitem} \usepackage{pifont} \begin{document} ...
5
votes
3answers
256 views

Simplify itemize commands typesetting

If your document use itemize a lot of time, you are likely to get fed up putting \begin{}...\end{}. Is there any better way to do this? Something like a org mode of emacs use or lyx use?
5
votes
1answer
253 views

Intercalate pictures and items in beamer presentations

I'm preparing a presentation in which I'd like to have pictures in a new slide between \items. The final result should look like: Slide 1: I want to discuss: 1) Cars Slide 2: [Picture of a car] ...
5
votes
2answers
345 views

“itemize” or “enumerate” IN section headings

Is it possible to use lists WITHIN section headings, subsection headings, etc.? I wanted to do so like \documentclass[11pt]{scrartcl} \usepackage{enumerate} %... \begin{document} \section{My three ...
5
votes
1answer
179 views

Beamer - show all bullets in itemize environment but reveal the text for each bullet slide by slide

I would like to show in each of my slides all bullets from the first slide on so that the audiance can see how much information is to be expected on each slide, but the text for each bullet shall come ...
5
votes
1answer
26 views

How to modify the code `legal` in order to add some more lines to the items

Hi I want to add some lines in this code in order to have something like this: First item ------------------------------------------------------------------------ ...
5
votes
1answer
150 views

How to have an itemized list in beamer conditionally appear

I would like to have an itemized list of points with follow-up points appearing once I am taking about that item. My guess is that this is going to need something like a pause, overlay, or the \only ...
5
votes
2answers
216 views

How to left align text in two column itemize

When I use following MWE for getting itemized text in two columns, the item in the list sometimes take a "justified" formatting and thus there is significant space in between two words. This produces ...
5
votes
1answer
405 views

Handling margins and indent in itemize

I have looked around the site for a while and haven't found a specific answer about this particular problem: I am typing up a paper and was asked to separate different sections with headings. I would ...
5
votes
1answer
2k views

Aligning bullet and text in itemize

I want to make the bullets in itemize to align at 0 mm (no indent). Using the enumitem package, this can be done by specifying the option [leftmargin=*]. At the same time, I would like the texts to ...
5
votes
3answers
1k views

How to number equations with a list environment

Hi I wish to number equations with a list environment \begin{itemize} \item Lol \begin{equation} y_t=h_t(\hat{x}_{t|t-1}) \end{equation} \end{itemize} I want y_t=h_t(\hat{x}_{t|t-1}) in the same ...
5
votes
3answers
4k views

Line spacing with mixed font sizes in itemize environment

I'd like to mix in footnote-sized text with normal-sized text in beamer. The problem is that when I use \footnotesize the line spacing still corresponds to \normalsize spacing. Here's a minimal sample ...
5
votes
1answer
80 views

indenting under item

I'm trying to indent paragraphs after doing \item, for instance \item {\bf Research Question} \\ \indent The purpose of this research is However, \indent is not working when I'm using \item. Would ...
5
votes
1answer
133 views

Table, rotatebox and itemization

I'm trying to achieve something like this + -------------------------------------- + | - Item entry one with multiple + A | rows blablabla + A | - Item entry with blabla + | - Item ...
5
votes
1answer
391 views

Vertically align \framed with itemized list using ConTeXt

Problem The numbers in the following itemized list are not aligned with the text: Code It is possible to adjust the vertical alignment using the offset command: % Itemized bullet list ...
5
votes
1answer
410 views

Box around several but different items in an itemize environment

I am trying to highlight, at the end of my slide, several items in a list with a box in something similar as in the method shown in Box around a few items in an itemize environment. The difference ...
5
votes
1answer
3k views

Remove top and bottom margin in tabular (around lists)

If I create a table with several (short) lists, currently I'm using a table construction with enumitem to (almost) remove the left margin. Now I still have a rather large margin at the top and the ...
5
votes
2answers
2k views

Change itemize symbol in a Beamer note

I'd like to change the symbols used for itemize lists inside beamer notes. Setting for example \setbeamertemplate{itemize item}[triangle] affects only my itemize lists outside of notes (besides the ...
5
votes
2answers
314 views

Specify vertical space between outlines (enumerate) levels

I'm using the outlines package, and I'm curious to know how to modify the vertical spacing between entries/items in the outline. I'm happy with using \onehalfspacing for the vertical spacing between ...
5
votes
1answer
982 views

Remove the space above/below itemizes and descriptions

In the document below an itemize is nested in a description and I want to have no vertical space between the entries. I removed the space above and below of itemizes and descriptions using ...
5
votes
1answer
542 views

Define a custom command to wrap easylist

I've installed the easylist package and am using it just fine. I've tried to create a custom command to shorten my typing as I've done before with the regular \begin{itemize}. My regular one that ...
5
votes
1answer
331 views

Beamer: Synchronize overlays for itemized list items in presentation slide and notes slide

I am making a presentation using Beamer and I would like for most of my slides to have an itemize list on the presentation slide that is uncovered using the <+-> style. On the associated notes ...
5
votes
1answer
285 views

Change list bullet style independently from each other in ConTeXt

Background I would like to vary the style of multiple itemized lists on the same page, independently from one another. Code A short example: \setuppapersize[A5] \setupcolors[state=start] % ...
5
votes
1answer
135 views

how to tag an equation within an itemize - using amsart

I'm doing the following thing \documentclass[leqno]{amsart} \begin{document} Example. \begin{itemize} \item Such and so \item the following holds \begin{align} x - 2 \end{align} ...
5
votes
1answer
179 views

Empty List Environment

I created commands for resume fields. This is a simplified example of the desired outcome: Currently, I have to create two separate commands to do this, one with \begin{itemize} and the other ...
5
votes
1answer
965 views

\overprint inside \itemize problem — shaky frames

I'm having troubles with a presentation. I want to create something like this \documentclass{beamer} \usepackage{ulem} % To strikeout text \begin{document} \begin{frame} \begin{itemize} ...
5
votes
1answer
552 views

Correct left aligning items in simplecv (LyX) [closed]

The simplecv class (for LyX), provides the Itemize environment which is defined in simplecv.layout as follows: Style Itemize Margin Static LatexType ...
5
votes
1answer
128 views

Can I make an environment that defaults to include \item\relax tags in front of paragraphs?

This certainly sounds lazy, but my use case is designing a crude template for power point presenters to use in converting their content to a company's specific presentation standard, without their ...
4
votes
3answers
3k views

itemize without line feed

When I write a document with \usepackage[french]{babel} my \begin{itemize} \end{itemize} list begin with '-' before each item and no extra line feed before each item. But when I don't use this package ...
4
votes
2answers
5k views

Build custom \itemize

I'd like to create a CV similar to the one shown here. But I don't know what's the best way to create those text blocks. I had the idea to use itemize. But I don't know how to format the label of the ...
4
votes
2answers
290 views

New/blank line in itemize

I have an itemize area with several point inside it. I want to have the following result: - one - two - three Is there is an appropitate way to do so? As a workaround I used the following code to ...
4
votes
4answers
2k views

Split itemize into multiple columns

Is it possible to split an itemize list into several columns? (I'm sure it is, but I couldn't find a solution around here) And additionally: Is it possible to automatically split a list into multiple ...
4
votes
2answers
1k views

Can individual items in an itemize list be labelled and hyperref linked?

If I try to label items in a list as in \documentclass{article} \usepackage{hyperref} \begin{document} \begin{itemize} \item blah \label{list:blah} \pagebreak \item foo \label{list:foo} ...
4
votes
1answer
5k views

How to center a text line within an itemize environment?

How to center a text line within an itemize enivornment ? What I tried: \documentclass[a4paper]{article} \begin{document} \begin{itemize} \item {\centering text to center} \end{itemize} ...
4
votes
2answers
5k views

Moderncv: bulleted list in cvitem

I am using moderncv to write my CV. Therefore, I want to use a bulleted list withing \cvitem. In principle this works, but an extra line is added so that it is not on the same height as the first ...
4
votes
2answers
4k views

itemize and \item option

I am using itemize and then \item[option] inside it. I thought ‘option’ would end up being in boldface, but it doesn't. I'm using LaTeX. Is there a way to easily modify that without having to write ...