{itemize} is about the itemize list environment. If you use this tag, add the more general {lists} tag.

learn more… | top users | synonyms

9
votes
3answers
309 views

How to produce this table in latex?

I want to produce the first two rows of this 5-column table in LaTeX: As you can see it is a special type of tables where we see: itemized lists inside but inconsistently, ie. column 4 all rows ...
1
vote
2answers
35 views

Adding some horizontal space to an itemize environment where \tab is used

I would like to add some horizontal space to this itemize environment. (Note that I use \tab). I tried using [itemindent=4cm] and \addtolength{\itemindent}{4cm} but the result is this: How can I ...
2
votes
2answers
65 views

Is there a way to make an itemized labeled list not go through the margins?

The following has the item name out of the margins: \documentclass{article} \begin{document} \begin{itemize} \item[very very very very very long item name] and here are its details \end{itemize} ...
5
votes
1answer
36 views

Itemize inside environment gives double space after

Some definitions and theorems end with an itemize. When I use pure amsthm this looks good, but when I use thmtools+amsthm it looks ugly with too much space below the theorem. I do not see what I have ...
1
vote
1answer
24 views

Number the algorithms with itemize or other environment

I am trying to number the two algorithm environments and put some space between each other but I am just getting the numeration at the side? How can I manage it to get the number before the ...
1
vote
2answers
42 views

latex missing “\item” when using itemize

I am tryint to add a list of items in a latex document. I currently have this setup: \documentclass[a4paper,10pt]{article} % Default font size and paper size \begin{itemize} \Item this is not a ...
0
votes
1answer
46 views

wrapfig followed by a list: items after the first does not wrap around correctly

When using the wrapfig environment followed by a list, the text of the first item of the list wraps around the figure. So, with the wrapfig that has a left placement, this text starts on the right of ...
1
vote
1answer
38 views

Beamer. How to put bullet lists inside a {?

I would like to obtain this The mwe is: (inside a beamer code) \section{Marco Teórico} \frame { \frametitle{Marco Teórico} $$ \begin{array}{l} \left\{ \begin{array}{l} ...
0
votes
0answers
18 views

How can I pit a \footnote within \itemize within \minipage in Tufte class?

I'm writing up lecture notes using the Tufte-class book, and I've been getting this constant error in reference to using a footnote within an itemize environment within a minipage. I would post a ...
1
vote
1answer
94 views

Beamer: a moving arrow in the front of each item

First off, please take a look at these slides: In the slide 8 (frames 1-16) we can see an arrow moves around the items. My question is how can I reproduce that itemize list in which an arrow can ...
1
vote
1answer
85 views

Remove whitespace before enumerate

I am using a list like this: \section{My section} \begin{enumerate} \item My first item \item Second item \end{enumerate} The problem is that enumerate produces a vertical whitespace just before ...
2
votes
1answer
28 views

left-to-right itemize in multicols environment

I have this code that uses the multicols environment to split a list on multiple columns: \begin{multicols}{3} \begin{itemize} \item List1ItemA \item List1ItemB \item List1ItemC \item ...
4
votes
1answer
57 views

How to set up beamer to grey out past items but hide future items?

I know about beamer's feature \setbeamercovered{invisible} and \setbeamercovered{transparent} to hide or grey out upcoming item's . But is there some way to have past items greyed (transparent) and ...
0
votes
1answer
50 views

How to make bullets in itemize larger and change their color?

I would like this bullet (\item) to be much larger than it is now and change its color. How can I do that? \begin{itemize} \item aa \end{itemize}
2
votes
1answer
29 views

Determining whether a line is inside an itemize or enumerate environment

I would like to be able to tell whether a line is inside \begin{itemize} ... \end{itemize} or \begin{enumerate} ... \end{enumerate}. My need for this stems from incrementing a counter for the ...
1
vote
1answer
61 views

How to prevent a linebreak before align/equation environment in itemize? [duplicate]

The following code \documentclass{article} \usepackage{amsmath} \begin{document} \begin{itemize} \item \begin{align} a&=b\\ &=d \end{align} \item \begin{equation} a=b\\ =d \end{equation} ...
4
votes
3answers
69 views

Getting rid of bullet point and indentation in itemize

I'm writing my resume in LaTeX and am using itemize to list my employment history. Example: \begin{itemize*} \item \headerrow{\textbf{Google}}{\textbf{Cambridge, MA}} \headerrow{\emph{Software ...
3
votes
1answer
47 views

Using item “labels” in beamer

I want to use the same image that's used in \item in my beamer presentation in other parts of the text (basically, at the start of a non-itemize paragraph, or in a tabular, whatever. I am using now ...
0
votes
1answer
29 views

Bullets in moderncv are not in the centre

Hi i recently observed that when you use itemize with bullets, the bullets do not come to the centre of the letter/word itemized but they are aligned lower. On the other hand, if you itemize with ...
10
votes
3answers
15k views

Tabbing inside itemize (or itemize inside tabbing)

How can I combine the tabbing and itemize environments so that I'll have a list in which I can use tabstops? - It would be nice foo bar - If I could get this working baz quuz I ...
1
vote
2answers
484 views

Use noitemsep and nolistsep, itemize options in beamer

I am trying to use the options noitemsep and nolistsep in beamer. My simple code is \documentclass{beamer} \begin{document} \begin{frame} \begin{itemize}[noitemsep, nolistsep] \item Item ...
2
votes
2answers
38 views

Insert tabular with caption inside itemize environment

I am trying to insert a table with a caption inside an itemize environment. However I can't find a way to align the caption nor the table itself to the border of the outer environment. I already ...
0
votes
1answer
40 views

Remove vertical spacing from top/bottom of itemize environment within a table [duplicate]

I'd like to create compact itemized lists within a column of a table that are vertically alligned with non-itemized text from the same column. I'm using enumitem to get more control over these ...
4
votes
2answers
73 views

Align a list with end of text

I am looking to create something like: where I can define a list that is shifted and aligned to the end of some introductory text. While I could hardcode a solution for specific text, how can I ...
3
votes
1answer
106 views

Eyeglasses as item bullet

I would like to Customizing lists itemize and title of theorem to looks like that : as usual in order to Switch chip, size and color for itemize i use \usepackage{pifont} or we can use Math ...
5
votes
1answer
58 views

Table-type bullets

How does one organize bullets in an array instead of just as a list? For example, regular bullets would look like so: roses are red violets are blue I lost the game so did you What I am hoping ...
4
votes
1answer
50 views

Make list start at same line as its section

I am trying to save space in my CV, so now please see this picture of it: Notice how Skills is aligned with its content, without leaving any blank line. However, Languages leaves too much empty ...
0
votes
1answer
44 views

Beamer: How to get value behind \setbeamertemplate{itemize item}{} and related?

I know that I can change the itemize symbol in a LaTeX Beamer presentation with \setbeamertemplate{itemize items}{\symbol}. I use a corporate template which defines the symbol that way. Now I want to ...
0
votes
2answers
51 views

topsep not working for itemize in longtable environment

My CV uses longtable for each "experience" block, so for example "Work Experience" is one longtable, "Research Experience" is another. I now need to write a few lines of description to elaborate on ...
2
votes
1answer
39 views

Specific horizontal alignment for enumerated items

In my document I have such construction. \documentclass[11pt,a4paper]{article} \usepackage{enumitem} \begin{document} \begin{enumerate}[label*=\textbf{\arabic*.}] \item Item One ...
1
vote
1answer
40 views

How to align first \item on baseline in tabular, using nested itemize environments

In a beamer presentation (no setspace, no enumitem) I want to use an itemize environment inside the column of a tabular. I want the first \item to be displayed on the same baseline, as the first lines ...
1
vote
2answers
40 views

How to align first \item on baseline in tabular, using modified \baselinestretch

In a beamer presentation (no setspace, no enumitem) I want to use an itemize environment inside the column of a tabular. I want the first \item to be displayed on the same baseline, as the first lines ...
2
votes
1answer
108 views

Beamer overlay with columns - changing image and highlighting text

I am making a presentation to explain an algorithm which produces a picture. I want to use two columns to have the picture on one side and the algorithm on the other. I want to click through the ...
8
votes
2answers
331 views

Fast way to write itemize list

I'm using beamer to make presentation slides. In beamer, a lot of itemize lists are usually used. Is there some quick way to write an itemize list like Markdown? When some list such as below is ...
5
votes
2answers
84 views

Vertical alignment of itemize in tabular

Creating beamer presentations I want to display an itemize environment in the second column of a tabular. My aim is to have the first item on the same baseline as the content in the first column. My ...
7
votes
2answers
146 views

Present a list as a “tree”

I want to present an "itemize" list as a tree. I.e, the current list is: Root Child 1 Child 2 Child 3 And I want it to look something like this (but with continuous lines): ...
5
votes
3answers
199 views

Underlining an item

Is there a way to allow a new item inside an underline command? In my real work, I have a custom command generating the "item" with its text, so moving the \underline to the other side of the \item ...
2
votes
2answers
32 views

How to align equations that are in different items of an itemize [duplicate]

I want to align equations in an align* environment, that are on different \items of an itemize environment. Here is my MWE: \documentclass{article} \usepackage{amsmath} \begin{document} ...
3
votes
2answers
48 views

How to show several images under one slide?

I am trying to show several images under one frame. Here, I'm trying to show the coloring of a node in frame. My idea was to itemize the images and disappear the rest except the one I'm talking about. ...
0
votes
1answer
29 views

Long text + lists in a single tabular cell

I have been writing on a project on LaTeX that involves writing tables with a lot of text and some lists in it. Please look at the exemple below (Sorry for the poor quality) : Here is the LaTeX ...
0
votes
2answers
53 views

itemize in beamer - alignment of custom bullets

I'm doing a beamer presentation and defined some custom itemize bullets, which look like this: \newcommand{\pro}{\item[\textbf{\color{green}+}]} ...
2
votes
1answer
22 views

Store text command containing itemize in a variable

The problem is that I have created a variable containing a text with some itemize environment. Now, for some reasons, I want to store the content of it in another variable. But it's not working (see ...
16
votes
5answers
21k views

Global setting of spacing between items in itemize environment for beamer

I'd like to modify the spacing between items in the itemize environment. This post shows how to modify a specific itemize environment (\addtolength{\itemsep}{0.5\baselineskip}). However, I'd like to ...
12
votes
4answers
10k views

Custom alignment of text in itemized environment

I want to describe the variables involved in an equation in an itemized environment such that every item begins with the variable name and subsequently comes the description for it. I'd like to have ...
3
votes
2answers
92 views

Structure like itemize but with no indent

I am writing an IEEE conference paper, and I am looking for a structure like itemize to list a bunch of properties but I would like to remove the indent from each item. As you might know I can not ...
1
vote
1answer
40 views

Horizontal align the TikZ picture in itemize label position

I am going to use custom itemize label created by TikZ, however can not align it as other labels: I tried shift but it is no work. I know that maybe I should change the itemize settings, however it ...
2
votes
1answer
39 views

Theorem environment with a line break after label and before an enumerate environment

What I want to achieve is very similar to this question, but the solution offered seems not to work in precisely the cases I need it to work! I'm placing enumerate and itemize environments inside a ...
2
votes
1answer
118 views

ConTeXt: change distance between inmargin bullets and text in bulleted list

Can some kind soul show me how to specify the amount of horizontal space between list symbols (bullets, numbers, etc.) and item text in ConTeXt? Specifically, I'm trying to create a bulleted list in ...
4
votes
3answers
214 views

How to change itemize bullets with specific alphabet?

I have an itemize bullets in beamer as follow: \begin{itemize} \item Condition 1 \item Condition 2 \item Condition 3 \end{itemize} which produces as you know a list of bullets: ...
3
votes
1answer
131 views

Shaded triangle (itemize environment, article class)

I'm wondering how to draw a beamer like bullet in the article class. I've gotten close using \renewcommand{labelitemi}{$\triangleright$} but would like the triangle to be filled in and am not sure ...