2
votes
2answers
35 views

No space between three-digit table number and title in List of Tables (KOMA-script) [duplicate]

I have KOMA script report in LyX (2.0.6 on Mac OS X 10.9.3) where there are more than 100 tables per chapter. For all the tables with more than thee digits (numbered chapter number dot table number) ...
2
votes
1answer
47 views

add \figurename to \listoffigures (package titletoc)

at the moment I'm a little bit fighting with my listoffigures. - I 'just' want to put the \figurename(here it is "Pict.") in front of the \contentslabel in the lof. Here's a little code example: ...
3
votes
2answers
61 views

Customization of TOC in KOMA

I would like to customize the listing of the chapters given in the table of contents in a scrbook document. Given the following example: \documentclass{scrbook} \begin{document} \tableofcontents ...
0
votes
0answers
51 views

Adding bibliography to table of contents in scrreprt, using biblatex and biber [duplicate]

EDIT: The cause for the problem described below was that the .bbl file was being emptied every time the document compiled. I'm attempting to add my renamed bibliography as an unnumbered top-level ...
2
votes
2answers
51 views

margins or line breaks in koma-script table of content

Entries in my KOMA-script TOC spread too close from the page numbers: One solution is to use a short title and insert in it a line-break, but this is not an acceptable solution. I am trying to ...
2
votes
2answers
78 views

Create new section commands (with correct TOC entries) in KOMA-Script

What is needed to make a new sectioning command which outputs a correct entry in the TOC? For example, a command \foo which outputs something similar to \subsection in the TOC (and in the main ...
1
vote
1answer
97 views

Lyx - List of Figures

I am using LyX and the report class. (KOMA-Script). My List of Figures just prints the figure number and its caption but not the word Figure infront. How could I modify the command in the Latex ...
3
votes
1answer
44 views

Indents of section*{} name in TOC

I have some sections (e.g. References) that don't have a section number. However, I'd like to include them in the TOC with \addcontentsline{toc}. But how can this manually added section be aligned to ...
2
votes
2answers
57 views

Page range in TOC chapter entry in scrbook

I asked the question KOMA: Page range in TOC chapter entry Answer linked to Chapterwise page range in the TOC But i do not get the result for the following code... \documentclass{scrbook} ...
3
votes
2answers
95 views

Behavior of numbered \part in ToC

I have a document with several \part while I wrote all lower sections in \paragraph. In the ToC all is working as I which, just the \part parts (sorry for the wording...) are displayed in a strange ...
4
votes
2answers
249 views

What are these warnings for minitoc package?

I'm using a scrreprt document class to write my lecture notes in a condensed form for easy reviewing later. I organized the main.tex in a modular file and I downloaded, installed and loaded the ...
2
votes
2answers
126 views

Bold chapters and sections and normalsize subsections Table of Contents in KOMA-script

I would like to make chapter and section appear bold in the Table of Contents (TOC). I am using a KOMA-Script prototype. My Table of Contents looks like: Although I define sections to be written ...
6
votes
2answers
675 views

KOMA-Script scrreprt: How to change chapter appearance and produce a chapter based Mini TOC

This post is a 3 part question with which I would need help. The questions are all associated with chapter styling and subsections within the \documentclass{scrreprt}. I am sure I could work them out ...
4
votes
1answer
271 views

KOMA-Script (scrbook): onecolumn table of contents & minitoc in twocolumn document

I have problem with formatting of my tables of contents. Please see my MNWE below. I would like to switch all of my tables into one column layout. I try to use solution from this tex.stackexchange ...
4
votes
1answer
119 views

Appendix in scrreprt - Separate table of appendices but mentioned in original TOC

I tried to find solutions to this particular case, but I wasn't able to. What I want to achieve is to create an appendix in the following class: \documentclass[a4paper, 12pt, headsepline, ...
3
votes
0answers
64 views

KOMA: Page range in TOC chapter entry [duplicate]

I need to print page range in chapter entry, like Chapter title ------space------- starting page number - ending page number \documentclass{scrbook} \usepackage{lmodern}% for ...
4
votes
1answer
85 views

Problem using optiontohead in scrreprt class

I am using claasicthesis version v4.1 along with scrreprt version v3.11b. I am trying to force printing the longer version of the section title in the table of content but no success so far. I used ...
5
votes
2answers
67 views

Hyphenation in a table of contents causing bad blocks

I want to turn off words hyphenation in a TOC but leave it in the rest of a document. The intention to do it is to avoid bad blocks such as you can see below in my MWE. I prefer a solution that ...
4
votes
1answer
469 views

The titlepage option and the table of contents in KOMA-Script

The KOMA-Script document classes provide the titlepage option which when set to true typesets the title at its own page and otherwise allows for content to immediately follow the title on the same ...
3
votes
0answers
79 views

KOMA-Script article in LyX [duplicate]

I would like to set the document class of my LyX document to KOMA-Script article. When I try this via Document > Settings > Document Class, the document does not compile any more. Last part of ...
3
votes
1answer
135 views

List of Algorithms: space between number and algorithm caption too small

I'm facing a problem with KOMA-Script and algorithm2e: algorithm captions in the list of algorithms collide with the numbers preceding them. See the image for an impression. How would I go about ...
2
votes
1answer
426 views

tocloft, listoffigures, listof=totoc, KOMA: not in tableofcontents [closed]

This MWE illustrate the problem: \documentclass[listof=totoc]{scrreprt} %\usepackage{tocloft} \begin{document} \tableofcontents \listoffigures \chapter{test} \begin{figure} \caption{test} ...
3
votes
2answers
534 views

How to remove page number in TOC for Part entry (not page number printed in TOC pages)

I want to remove page number in TOC entry for Part (in this example 3 must be removed) \documentclass{scrbook} \usepackage{lmodern}% for sans-serif plus bold plus italic ...
2
votes
1answer
343 views

Format ToC in KOMA-Script

I want to make the page number italic in the ToC. \documentclass{scrbook} \usepackage{blindtext} \usepackage{tocstyle} \usetocstyle{nopagecolumn} \begin{document} \tableofcontents \blinddocument ...
4
votes
2answers
196 views

TOC: part name in center with out page number

I want to put part name in center of TOC as MODULE - I with out page number. \documentclass{scrbook} \usepackage[english]{babel} \usepackage{lipsum} \usepackage{tocstyle} ...
16
votes
2answers
329 views

Combined List of Figures and Tables?

Is there a way to have a List of tables and figures as one list? Currently I have \listoffigures \listoftables which generates two lists and starts a new page for each list. What I want is a list ...
8
votes
2answers
357 views

KOMA-Script scrbook: width of chapter and section number

I'm using KOMA-Script’s scrbook class and have problems with the Table of Contents. When the chapter number is too large, the chapter number is glued to the chapter heading. The chapter-section ...
4
votes
1answer
295 views

Section title in the table of contents

I have the following simple problem. The name of one of my sections is very long. Hence I decided to have a line break in its title. For the header I use a short version of this title. So it looks ...
2
votes
1answer
144 views

How can I have list of figure etc. labelled D. List of Figures, E. List of Tables, F. Bibliography…?

I am using KOMA class scrreport and want the following structure of my appendix: A. Abbreviations B. ... C. ... D. List of Figures E. List of Tables F. Bibliography G. Acknowledgments ...
1
vote
2answers
214 views

Problem and question tocloft

I tried to create my own "List of things" with help of this post: Define your own list of Now my questions: I don't want to use the command \algorithm {Text}. Instead I want to use a container like ...
1
vote
1answer
786 views

Include Abstract & References page in ToC using tocbibind

The code below will print a table of contents that lists the Contents page, section and subsection. The contents page itself is on page ii, and the abstract should come before it, but it doesn't ...
2
votes
0answers
81 views

Generating table of content (TOC) only from file.toc [closed]

I use scrbook.cls How to generate TOC from .toc file information available with me. using Pretty Table of Contents solution with memoir documentclass I want to generate TOC separately and i want to ...
0
votes
0answers
30 views

Reduce the space above 'scrreprt's TOC [duplicate]

Is there a way to reduce the vertical space above the table of contents in the scrreprt?
5
votes
2answers
319 views

Part title in list of figures and tables?

I'm using KOMAScript. I have a \listoffigures and a \listoftables. My document has several \part{}'s. In the two lists the figures and tables are already grouped (small vertical space) by the ...
3
votes
2answers
226 views

ToC on cover and continues on the second page

The design I am working on has the ToC as the cover, together with the title & author. There is a production restriction which the second page (inner cover) can't be printed. Please find the ...
6
votes
1answer
171 views

When writing my own document class, certain options don't get passed to base class. Why?

I'm trying to create my own class using scrbook as a base class, and biblatex as for my bibliography. Consider this MWE: \documentclass[bibliography=totoc,fontsize=12]{scrbook} ...
2
votes
1answer
382 views

suppress an entry from list of figures/tables in koma script

While I don't regret switching a thesis to KOMA script, I do (sometimes) regret stopping using the caption package even though it works fine with scrreprt! I need a solution that won't require using ...
4
votes
1answer
296 views

Reduce spacing after heading of List of Figures

I have some issue with my LaTeX document. It uses scrbook class and I don't like the chapter spacings in the List of Figures. For the actual content, the spacing is nice, but in the LOF, I'd like to ...
5
votes
1answer
285 views

Custom title page for each part with scrreprt class

I'm currently "compiling" a document (scrreprt) which includes many chapters from various other documents. I want to group these chapters into parts but instead of the titlepage generated by the ...
6
votes
1answer
734 views

Formatting list of custom floats in classic thesis

I am writing a document using classicthesis package, where I have some algorithms written with the clrscode package. I used package float to create a new float named "algorithm". However when I print ...
4
votes
2answers
316 views

Changing text area for Table of Contents in Koma Script

My friend is just about to submit her Diplomarbeit (German M.Sc.) and she bumped into a tiny corner of Koma-Script. The Table of Contents was just a tiny bit too long. Thus, one chapter was forced ...
5
votes
1answer
674 views

Center parts in toc with tocloft

I'm trying to create a toc in a large Latex document which uses the KOMA script. In the toc I would like to center the parts and remove all other components (pagenumber, partnumber). I use tocloft (a ...
5
votes
3answers
211 views

Chapter list in TOC whilst using \chapter{} only

I have a fiction book to typeset and I am using scrbook class as I thought that it is very flexible. For every chapter beginning I am using \chapter{} command and leave the field inside {} empty, so ...
3
votes
1answer
669 views

Appendices title before list of appendices

My table of contents has the following form: 1. Foo ............................. 1 2. Boo ............................. 2 A. something 1 ..................... 3 B. something 2 ..................... ...
5
votes
3answers
970 views

How to increase the numwidth for a part in ToC?

I am using a Koma-Script Book and I would like to begin the part numbers from 2012. However, 4 digit part number entries are causing a problem in the tableofcontents. There is a hbox overfull and the ...
3
votes
1answer
295 views

Table of contents broken with Koma Script and lstdoc

There seems to be some negative interaction between Koma Script (using version 3.11a) and the lstdoc package in my example document. The MWE works nicely when I comment out \usepackage{lstdoc} but ...
3
votes
1answer
254 views

Position of the title of the “table of content” differs from position of other titles

I use Latex with the scrbook document class. I noticed that the title Table of Content has a different position than e.g. Table of Figures or Chapter 1. It actually is placed a bit lower. (I mean the ...
6
votes
1answer
1k views

Displaying “Appendix” in a section inside subappendices environment

I am using scrreprt from KOMA packages, the appendix package, and the arsclassica package. I'd like to add "Appendix" before the number of an appendix to a chapter. If I use scrreprt and the ...
20
votes
1answer
3k views

KOMA warning about ToC

Lately I've noticed the following warning from KOMA when I compile my documents: Class scrreprt Warning: \float@addtolists detected! (scrreprt) You should use the features of package ...
1
vote
1answer
219 views

Tocloft + KOMA, get rid of numberings in table of content, but keep them in the content and in other lists such as list of figures

I am using the documentclass scrbook (KOMA) with tocloft and would like to get rid of all the numberings of the chapters, sections and subsections in the table of content, but not in the content and ...