KOMA-Script is a bundle of classes and packages replacing the LaTeX standard classes and providing additional features with emphasis on typography and versatility.

learn more… | top users | synonyms

4
votes
2answers
157 views

space between part title and chapter title in toc [Koma]

Is there a way to decrease the vertical space between part title and chapter titles and also decrease the space between chapters and the following part? I looked for a solution but most people seem to ...
2
votes
2answers
331 views

Tocloft + KOMA, get rid of numberings in table of content, but keep them in the content and in other lists such as list of figures

I am using the documentclass scrbook (KOMA) with tocloft and would like to get rid of all the numberings of the chapters, sections and subsections in the table of content, but not in the content and ...
2
votes
2answers
277 views

Tocloft + KOMA, get rid of numberings in table of content, but keep them in the content

I am using the documentclass scrbook (KOMA) with tocloft and would like to get rid of all the numberings of the chapters, sections and subsections in the table of content, but not in the content ...
6
votes
2answers
962 views

Align numbered and unnumbered entries in ToC (Koma-Script)

In Koma-Script I use \addsec{.} to add section without numbers. However, with respect to my ToC this gives undesirable results, as the unnumbered section-title is aligned with the beginning of the ...
6
votes
4answers
2k views

How to increase the numwidth for a part in ToC?

I am using a Koma-Script Book and I would like to begin the part numbers from 2012. However, 4 digit part number entries are causing a problem in the tableofcontents. There is a hbox overfull and the ...
3
votes
3answers
126 views

KOMA-script: Add word “Part” and “Chapter” in ToC

How can I add the word "Part" to the part entry and "Chapter" to chapter entries in the ToC? \documentclass[chapterprefix]{scrbook} \usepackage[english]{babel} \begin{document} \tableofcontents \...
4
votes
1answer
48 views

scrheadings and longtable not working together

I need pretty urgent help (thesis hits the printer in two days!) getting scrheadings and longtable working together. The problem is if I have scrheadings enabled, the longtable tables will not align ...
1
vote
1answer
80 views

Custom page numbering display in table of contents

Using a KOMA-script class, I would like to customize the presentation of the pagenumbers in the table of contents. My pagenumbers are reset every section and are represented like 2-3 which means page ...
0
votes
0answers
106 views

Toc, Bibliography, Indexes and dots

I have to add to the ToC the Bibliography and the Indexes (e. g., the Author index) in such a way that they have the same style of a Chapter without the Chapter number. In particular, I need to add ...
0
votes
0answers
84 views

Modifying the appearance of appendix titles

I want to modify the appearance of appendix titles. For that I use the package appendix with the following options: \documentclass[ numbers=noenddot ]{scrreprt} \usepackage[ automark, ...
2
votes
1answer
68 views

KOMA-Script (scrartcl+scrletter): Adjust spacing of signature with “\includegraphics{..}” from closing

It seems that the KOMA package scrletter (used with the class the class scrartcl) ensures that there is vertical space between the output of the \closing{..} and where the KOMA variable signature is ...
9
votes
3answers
7k views

How to change font size of longtable-lines without changing font size of caption?

I'd like to change the font size of all contents of a longtable to footnotesize. However the rest of the document and also the caption (!) shall be (stay) in normal size. (pdflatex is used) How can I ...
3
votes
1answer
92 views

convert titlesec code to something KOMA-script like

I know that it is not a good idea to use titlesec together with KOMA script, but it worked in the past. Now it does not work and since I rely on KOMA script I would like to replace the remaining ...
18
votes
2answers
703 views

Scrartcl 13.999 point 14.4 point but not 14 point?

Can the scrartcl class make a true 14 point type? It will produce 13.999pt, 13.9999pt and 13.99998pt, but 14pt produces 14.4 point type only. Thanks :) \documentclass[fontsize=13.999pt]{scrartcl}...
3
votes
1answer
55 views

Redeclared Section formatting - Centering

I would be grateful if someone could explain how the following could be centered instead of indented? Perhaps a MWE is not required for this? \RedeclareSectionCommand[ indent=1.25in, font=\...
1
vote
1answer
66 views

How to turn off headers with KOMA-Script Book

I'm using the KOMA-Script Book class to create a book in LyX. I don't want to have any headers in my book, but they're active by default. Is there anything I can do to turn them off? Thank you for ...
26
votes
4answers
8k views

How do I make pages which were “intentionally left blank”?

I have a scrbook document with an openright option, i.e. every once in a while a blank left page appears in the document. Not that I really want to do this, but how could I include the infamous "This ...
10
votes
2answers
469 views

Reproducing the Chapter-Picture Style of the Legrand Orange Book

I'm trying to reproduce the Chapter-Picture style of The Legrand Orange Book but with the scrbook class. Since the picture and chapter title is set by fancyhdr I can not just use the same code, as ...
2
votes
1answer
82 views

Komascript chapter title position

I'm trying to format the Chapter title (I'm using Ubuntu which has komascript 3.12) using Tikz to add a minitoc. I can format the number and chapter prefix but the chapter title does not change ...
5
votes
1answer
369 views

Same \chapterformat for \chapter and \chapter* without titlesec

I've done some styling for my chapter titles, based upon tikz and the titlesec package. Unfortunately, the KOMA-Script packages gives me numerous warnings about titlesec. In order to get rid of the ...
2
votes
2answers
58 views

How to get a float landscape on a new and empty page

I would like to have a floating figure in landscape placed on a new and empty page (without header, footer and number). The plot shall become as wide as possible. It doesn't matter if the caption is ...
2
votes
1answer
452 views

Uppercase chapter with KOMA-script

It has already been mentioned that it could be tricky to get uppercase letters in chapter for scrbook. However, the solution in Using \MakeUppercase in \@startsection works for scrreprt. The solution ...
0
votes
1answer
51 views

Section title with background color and line breaks in KOMA

I want my subsection title to have a colored background with support for line breaks. There are a few questions about spanning that background to the margins - that's not what I want to achieve, ...
3
votes
1answer
56 views

How to get the subsection and subsubsection automatically in the header using scrheadings?

How to get the subsection and subsubsection automatically in the header using scrheadings? Complete MWE: \documentclass[ paper=128mm:96mm, fontsize=12pt, pagesize, parskip=half-, ]{scrartcl} \...
1
vote
2answers
88 views

Koma Script: Indent Paragraph but not Headings

I want to increase the left margin of paragraphs, but keep headings as they are. It should look similar to the layout of the hitec class. I am using the scrartcl class. So far I tried \setlength{\...
2
votes
0answers
93 views

Adding KOMAscript to LaTeXML

Like many people, I prefer KOMA Script classes scrbook, scrreprt and scrartcl over the original book, report and article. Lately I’ve been trying out a web service for collaborative writing, Authorea, ...
3
votes
2answers
759 views

pdfx , trim size and margins

I'm using scrbook with forced margins and pdfx to produce PDF/X-1a compliant documents for the publisher. pdfx resizes the document and puts the trimed document in the bottom left corner. I'm not ...
3
votes
1answer
40 views

\setkomavar{fromemail}{foo} not shown

The following letter document does not show the email address, that should be triggered by command \setkomavar{fromemail}{goodboy@foo.com} Hereunder the full tex document \documentclass[ ...
2
votes
1answer
62 views

Class scrbook can't get \RedeclareSectionCommands[… to not skip after chapter

helping my wife with her master's thesis. Her faculty wants no more skip after headings than between normal lines and headings can be bold but not larger than 12pt. I am using Redeclaresectioncommands....
2
votes
1answer
68 views

How to change the font size of the abstract in KOMA-script?

More obviously, the following does work: \addtokomafont{abstract}{\footnotesize} Less obviously, the following does not work either: \usepackage{etoolbox} \patchcmd{\abstract}{\footnotesize}{}{}{} ...
1
vote
1answer
89 views

Converting exact margin requirements to areaset command

How do I find out what \areaset command to use for a specific margin requirement, e.g., left=2.5cm, right=2.5cm, top=2.5cm and bottom=3cm?
11
votes
3answers
1k views

Typesetting exercise sheets

I want to typeset weekly exercise sheets for students. Typically, one sheet consists of 2-5 exercises. Additionallly, a version including solutions shall be provided for the tutors. Since more or ...
2
votes
1answer
44 views

Justifying the closing of a letter using KOMA-script scrlttr2

I try to have the closing of my letter justified just as the body of the letter using scrlttr2. It can seems to be a stupid question since the closing use to be something really short in English, but ...
5
votes
1answer
112 views

A titlesec to KOMA-script lexicon: how to emulate titlesec commands into KOMA native ones?

Could we create a titlesec to KOMA-script lexicon? Or, in other words, how to emulate titlesec commands with native KOMA ones? The point would be to define "\titleseccommand[<a>]{<b>}{<...
2
votes
1answer
55 views

Package scrextend warning when changing the font size

I am using the command \usepackage[fontsize=8pt]{scrextend} to change the font size and I am constantly get the warning "Package scrextend Warning: Using fallback calculation to setup font sizes ...
13
votes
3answers
5k views

How to put both chapter and section name in the header of the page?

I'm working on a one-sided LaTeX document with document class scrreprt and I'm using scrpage2 to customize headers and footers of the pages. At the moment, the respective chapter name is shown in the ...
1
vote
0answers
44 views

two caption styles [closed]

I'm using a KOMA-Script class with the twoside option. I have two types of figures: horizontal and vertical. I want to get a caption next to a vertical figure AND a caption below a horizontal figure....
6
votes
1answer
174 views

Newline after Section number / before Section title in KOMA Script

i have to adhere to a style guide which dictates newline after a chapter/section/etc number, i.e. instead of the usual 1.2 Heading its supposed to be 1.2 Heading This has to work for both the ...
1
vote
1answer
106 views

How to avoid a text body-addressee clash on scrlttr2 letter when multiple addressees are listed?

In trying to use the scrlttr2 package, with a letter address to lots of multiple parties, there is clash/crash between the body of the letter, and those to whom the letter is addressed. In other words ...
2
votes
2answers
77 views

Document class scrartcl - printing bibliography

I can't get the bibliography to print when I use document class scrartcl. Can anyone help me understand why? \documentclass[epsfig]{scrartcl} \usepackage[english]{babel} \usepackage[none]{hyphenat} \...
2
votes
2answers
86 views

Formatting the TOC

Is it possible to format the list of Chapters and Page Numbers in a TOC? I would like to remove the bold font face and reduce the size of the font in the TOC to 10pt. My MWE is: \documentclass[12pt,...
6
votes
2answers
85 views

Make footnote clickable both ways

Using the hyperref package, footnotes become clickable and lead to the bottom of the page where the footnote is printed. However, clicking on the footnote's number does not bring the reader back to ...
4
votes
1answer
69 views

Formatting \addchap

My apologies in advance for such a banal question. I am using \addchap in a document and, would like to centre the chapter heading it creates. Could someone help me out with this please? A MWE: \...
1
vote
1answer
35 views

Make LaTeX / KOMA-Script ignore vertical depth in sections

How can I force LaTeX / KOMA-Script (>=3.15) to ignore the vertical depth in sections? MWE showing the problem: \documentclass[twoside]{scrartcl} \begin{document} \section{ja} \rule{\textwidth}{1cm} ...
1
vote
1answer
57 views

Appendix titles not aligned in TOC

I have a problem with the placement of Appendix titles in the TOC. I use the appendix package with titletoc option. The following code \documentclass{scrreprt} \usepackage[utf8]{inputenc} \...
3
votes
3answers
151 views

Small caps/small letters for TOC page numbering

I use both Arabic (1, 2, ...) and Roman page numbering (I, II, ...) in my document. However the normal Roman figures look too dominant in the table of contents (e.g. XXVIII). The lower-case Roman ...
1
vote
1answer
136 views

KOMA-Script and vertical spacing after paragraph headline

I'm currently having troubles changing the vertical spacing from a paragraph headline to the succeeding body text. What I want to have is a newline after the paragraph heading. As I understood the new ...
2
votes
1answer
53 views

Text in \dictum in justification

I use a scrreprt, and place an epigraph like this before the chapter beginning: \setkomafont{dictumauthor}{\normalfont} \renewcommand*\dictumwidth{0.5\linewidth} \setchapterpreamble{% \dictum[Lewis ...
3
votes
2answers
153 views

How to remove period after part number in TOC (KOMA used)

How to remove period after part number in TOC (KOMA used)? My solution was to set tocloft package, which is provide command \cftpartaftersnum but I do not want to use it for some compatibility reasons....
4
votes
1answer
1k views

scrbook - twoside produces shorter, not longer, binding margins

I use KOMA-Script and I want to print it two-sided. However, in the two-sided view margin for the open edge (right for odd pages) is wider than for the binding edge. -Is it the indented behavior?- (...