KOMA-Script is a bundle of classes and packages replacing the LaTeX standard classes and providing additional features with emphasis on typography and versatility.

learn more… | top users | synonyms

2
votes
1answer
366 views

scrartcl and fancyhdr: Strange spacing behaviour

Consider the following piece of code: \documentclass{scrartcl} \usepackage{ifthen} \usepackage{fancyhdr} \pagestyle{fancy} \lhead{} \chead{ \ifthenelse{\equal{\thepage}{1}}{}{ ...
4
votes
1answer
226 views

Problem with sans serif font in Komascript

I want to make a complex, custom titlepage with graphics etc. (I don't see that using the default template is an option). I want to use the "TeX Gyre Pagella" serif font (-> ...
2
votes
1answer
74 views

Moving equations and aligns into outer margin

I have rather narrow text width, so sometimes I have to move floats to the outer margin. In case of drawings and tables I use command \widefloat defined below \documentclass[11pt]{scrbook} ...
6
votes
2answers
133 views

Problems with \ifthispageodd

I am using KOMA script for my document. Occasionally, I have a float that is wider than text width, and I want the float to be pushed into the outer margin. This is why I defined \widefloat command, ...
7
votes
2answers
217 views

Use \singlespacing in scrheading and \onehalfspacing in the main document

I'm writing an article using KOMA-script scrartcl class. The main text uses \onehalfspacing option from setspace package. In my article I have headings with couple lines of text set up using scrpage2 ...
5
votes
2answers
67 views

Hyphenation in a table of contents causing bad blocks

I want to turn off words hyphenation in a TOC but leave it in the rest of a document. The intention to do it is to avoid bad blocks such as you can see below in my MWE. I prefer a solution that ...
0
votes
0answers
72 views

Creating “solution” sectioning - page break problem

I want to create my own sectioning, which counts and displays solutions to the problems, e.g. 1.1 Kinematics 1.1 Solution to problem 1.1 1.2 Solution to problem 1.2 1.3 Solution to problem 1.3 ...
3
votes
2answers
222 views

KOMA script - widening text width

I have a longtable that is about 14cm wide and the text width of 12 cm. Therefore I would like to widen the text width on two pages for 2 cm, toward the outer edge of the page. I have "discovered" ...
8
votes
1answer
346 views

Page layout design in KOMA script

This is follow up of the previous question, Document class for designing a book. Majority of respondents suggested that I design the the page layout using the class I was using for writing the text, ...
3
votes
2answers
145 views

Koma-script tikz \lehead book separators

I am using the Koma-Script scrbook document class. I would like to print an tikz image in the left-top heading of all even pages, but the figure gets shifted toward the right at every new page,so that ...
3
votes
1answer
160 views

Create a custom heading in scrreprt (normal fontsize, boldface)

I finally managed to make an account here, but I have asked 2 questions before without making an account :) Ok my next question is the following: I am using the class scrreprt and the usual commands ...
5
votes
2answers
168 views

Text width in one sided documents?

Example: \documentclass[paper=a4, fontsize=10pt, parskip=half, DIV=9]{scrartcl} How do I calculate text width? In particular: I understand that DIV=9 specifies that the page is divided into nine ...
2
votes
1answer
249 views

scrartcl without author?

I want to write a cost estimation for my part of a large business proposal, and I just tried scrartcl. My address I put in the top left corner using \titlehead. As it already contains my name, I did ...
4
votes
1answer
277 views

How to get Tufte-like margins with the KOMA book class?

I asked similar question here How to have headers, section headings, and figures expand into the margin? From Document class for designing a book I want to have new insight... ...
2
votes
0answers
82 views

Do something on every page [closed]

I want to know how to do something on every page. I'm just curious. I have checked KomaScript source code, but it is too complicate and too difficult for me. I tried to see how \lohead was made. This ...
6
votes
2answers
143 views

Space between floats and text after special declaration of font size for scrbook

Our designer suggested a font size of 10.5. We passed this as an option to the srcbook class and everything seems to work fine except the space between main text and floats. With fontsize=10.5 much ...
4
votes
1answer
198 views

Why is the default line length in the KOMA scrreprt documentclass longer than recommended?

When using the documentclass scrreprt (KOMA scripts) with the default parameters (a4paper, 11pt, DIV10), I observe line lengths between 81 and 85 characters (including spaces and punctuation, 78 to 85 ...
5
votes
1answer
145 views

Komascript style for empty page after page with `\part` title, or how to get page numbers there cleanly

My question is very similar to this question, and solutions there might work, but I'm using KOMA-script. I'd like page numbers on every page, including empty ones. To this end, I passed ...
2
votes
1answer
139 views

Caption text wrapping bad way

I'm having some strange behavior. My captions are wrapped as at the picture. This is probably cased by .sty and .cls files provided by an academic scholar, which are quite a mess. Someone has an idea, ...
4
votes
1answer
466 views

The titlepage option and the table of contents in KOMA-Script

The KOMA-Script document classes provide the titlepage option which when set to true typesets the title at its own page and otherwise allows for content to immediately follow the title on the same ...
3
votes
1answer
115 views

Disable binding compensation for titlepage

How do you disable the binding compensation in KOMAscript (e.g. \documentclass[BCOR10mm]{scrbook}) on the titlepage? I use the titlepage package and the fullsizetitle environment, but this is not ...
23
votes
7answers
2k views

Document class for designing a book

Introduction I've been using LaTeX for 15 years, but one year ago I started to write for the first time in my life a real book for students. So I followed usual widespread conviction: concentrate on ...
2
votes
0answers
610 views

Install KOMA script in Ubuntu-12.04 LTS [closed]

I apologize for this question, but I tried to install KOMA-script in my machine, the operating system is Ubuntu 12.04 LTS. I tried to install from the Makefile after I got the file koma-script.zip. I ...
3
votes
1answer
372 views

Setting paragraph indentation AND vertical space in KOMA class

I would like to have both a paragraph indentation and a vertical space between paragraphs in a the KOMA article class. At the moment I use \documentclass[12pt,captions=nooneline,DIV=14, ...
3
votes
1answer
81 views

No indention for wrapfigure captions

I want to remove the indention of wrapfigure captions but NOT for normal figure captions. Is this possible? \documentclass{scrbook} \usepackage[english]{babel} \usepackage[T1]{fontenc} ...
2
votes
1answer
367 views

Multiple Authors in scrartcl

I have the following code in the document portion and I can't seem to get \and to work with it - I'm assuming that it's due to something specific to using this class? \begin{document} % ...
2
votes
1answer
114 views

How to center Display equations on ClassicalThesis

While using ClassicalThesis package with scrbook document, I noticed that the display equations defined with \[...\] aren't centered in the page as with scrbook without the ClassicalThesis package and ...
5
votes
1answer
417 views

Introducing courtesy folding marks in moderncv

I have a new idea but it seems I don't know how to realise... as always! I am doing some experiments with moderncv, and I would like to introduce folding marks like in scrlttr2 (KOMA 2 Letter format) ...
3
votes
0answers
79 views

KOMA-Script article in LyX [duplicate]

I would like to set the document class of my LyX document to KOMA-Script article. When I try this via Document > Settings > Document Class, the document does not compile any more. Last part of ...
3
votes
1answer
125 views

wrong page size using LyX and Koma Script

First of all I am new to using Tex so please excuse any obvious things which will not be included in this question. But to the point: I am using LyX 2.0.6 (with Miktex 2.9). I am writing a thesis in ...
3
votes
1answer
105 views

Center align caption on margin

I am trying to align figure caption on the outer margin with koma-script, but no matter what I tried the option centeredbeside does not work. \documentclass[captions=centeredbeside]{scrbook} ...
6
votes
1answer
150 views

Is there a bleed correction in KOMA?

I'm preparing a book (text only) using the scrbook class of the KOMA-Script that in the end should have A5 sized pages. To do that, I have to prepare a PDF that has slightly larger pages, since the ...
1
vote
1answer
256 views

Footnotes too close to the text in KOMA scrartcl class

I use the scrartcl KOMA class and I find the footnote too close to the bottom of my text. How can I change it? I would like to have more space between them and have more text on a single page. I ...
4
votes
1answer
449 views

Switch to one-side layout in KOMA-Script scrbook

I'm using scrbook as document class for my thesis. The two-page layout is just fine in general, but I want the Appendix to be one-sided only. I read the following post Switch to one-sided mode in the ...
3
votes
1answer
135 views

List of Algorithms: space between number and algorithm caption too small

I'm facing a problem with KOMA-Script and algorithm2e: algorithm captions in the list of algorithms collide with the numbers preceding them. See the image for an impression. How would I go about ...
7
votes
1answer
643 views

KOMA-Script scrbook: How to change V-space between chapter prefix and title

My university has style requirements for my dissertation that seem to be tailored to users of MS Word and the like. In particular, the formatting of section headers differs only by use of ...
3
votes
1answer
886 views

header and footer in scrbook

I am having a problem with the scrbook class. Since I am quite new to it I spent quite some time researching but somehow haven't found a way to resolve it. I am trying to write a LaTeX document for ...
0
votes
1answer
655 views

KOMA-Script scrbook: How to put page numbers at top-right for all \mainmatter & \backmatter

Per my university's instructions for dissertations, I need the following: All \frontmatter pages numbered bottom-center (Easy...I got that) All other pages with numbering placed "even with the top ...
5
votes
2answers
345 views

Koma Script and real 13pt

I read about these several questions, how to use a font size other than 10, 11 oder 12 (see e.g. this one) using KomaScript, but somehow, that won't work for me. I use XeLaTeX to compile my document ...
4
votes
1answer
306 views

KomaScript Book: How to have Chapter Headings formatted just like text?

Might seem like an odd thing to do, but so far it's proven beyond my novice-level Latex abilities, and related posts I've looked at on this site seem a little more complicated than what I need. In ...
4
votes
1answer
300 views

\includegraphicx dynamic filename from \usekomavar

I am writing a letter with scrlttr2, which makes use of the KOMA script package. In an .lco file I have the following (which gives me a headache): ...
0
votes
1answer
315 views

problem with change of pagenumbering with twoside

I am using scrartcl with the twopage option to get a two sided document. The result is as desired. If I change the pagenumbering after the first few pages (title page, list of contents, ...) from ...
1
vote
1answer
134 views

Letter without “from address” and “to address” and no indention for letter text?

I want to write a private letter where I don't need the address fields. The letter should start with "Dear xx". I know it's a stupid question but I want to know if it is easily possible. I have made a ...
1
vote
1answer
191 views

How to obtain golden ratio for KOMA article class

I use \documentclass[11pt,captions=nooneline]{scrartcl} and I would like to know how I can achieve better margins than default. Apparently, the typerea package can help but I find the documentation ...
3
votes
2answers
183 views

Chapter headers with extending vertical rulers

I'm trying to reproduce the example below on the right margin, but have come into serious errors. \documentclass[a4paper,DIV=classic]{scrbook} \usepackage{scrpage2} \usepackage{lipsum} ...
6
votes
1answer
273 views

Headers with vertical rule with Koma-Script

I am trying to obtain the following headers with scrbook: numbers half-way into the margin, a a rule that extends up to (touches) the upper edge of the page, running heads should be within text ...
19
votes
5answers
1k views

Different margin on first page

To meet the conditions of our corporate design I need other margins on the first page of each document. The normal page layout is given by \usepackage[left=3cm,right=2cm,bottom=3cm,top=2cm]{geometry} ...
3
votes
2answers
480 views

Koma-script header/footer change with includepdf

I'm (still) moving from regular LaTeX classes (report, article) to Koma-Script. Lots of things are just okay, but not everything. My current problem lies with PDF inclusion and header/footer change ...
4
votes
1answer
89 views

Setpartpreamble and indent

how can I enforce an indent in a \setpartpreamble enviroment? Seems like \indent ain't working and a solution with \hspace seems to me like guessing the correct length of an indent. Any idea on how ...
9
votes
1answer
111 views

What is the cleanest way to call a command on each new chapter?

I'm using KOMA-Script and a mix of \chapter and \addchap commands. I would like to have \glsresetall called for every chapter as I want my acronyms redefined once per chapter. What is the cleanest ...