{labels} is about customizing the labels of {diagrams} and mathematical constructs like {matrices}. For questions about \label or similar commands, use {cross-referencing} instead.

learn more… | top users | synonyms (1)

4
votes
3answers
226 views

How to avoid the poles of the voltages to overlap the resistors?

Using this code in circuitkz I get this circuit \begin{circuitikz}[american] \ctikzset {voltage/distance from node=1}; \draw (0,0) to[battery,l=V] (0,2) to[R,l^=$R_1$,v=$V_1$] ...
4
votes
1answer
160 views

Beamerposter does not automatically change font size of equation number

I'm using the beamerposter package. While I'm able to change the font size of my equations, I cannot change the size of their corresponding labels. Consider the code below as a MWE. Is this ...
4
votes
1answer
499 views

Pandoc caption for code blocks [closed]

Consider the following code block: ~~~~{.Python .numberLines caption="test"} def myfunction(var): """ Oh how awesome this is. """ pass ~~~~ The code gets formatted correctly in the Pdf, but the ...
4
votes
1answer
1k views

label curve and/or contour name created with pgfplot via gnuplot

I will want to name different contour as one can see it on topographic card. How to do that? I want label on different curve with the parameter that distinguish the curves. I have created 10+10 curves ...
4
votes
2answers
2k views

How to create a figure with latex labels and handling transparency in gnuplot?

I am very fond of latex labels in my gnuplot figures, and the way I generate most of them is via the pslatex terminal. Here, I would like to take advantage of transparency in a figure (superimposed ...
4
votes
1answer
59 views

how to add labels to arrows avoiding conflicts with existing node shapes

Ok, I've made the following diagram: I want to add text labels to the various arrows (at the red points) and I want to ensure that the labels do not overlap the dotted lines, the arrow lines etc. ...
4
votes
1answer
105 views

How to put two labels for one figure

I have one picture, but in fact it is a combination of two figures. Therefore I am able to use \includegraphics only one time. Still, I want to use two labels for left and right side. I searched for ...
4
votes
1answer
30 views

Trouble using namedef and nameref to augment the default \ref command

I'm trying to enhance the builtin \label and \ref commands to let me add some additional text to the number typically associated with a reference. That is, I want to say ...
4
votes
2answers
62 views

Labels not referencing correct number figure

I have a report where it's required to have sections from another report both in the main body as well as in an appendix, and I'm including them by using the \input{some_section} command. I'm ...
4
votes
1answer
165 views

Arrows and label for equivalent resistance with Circuitikz

I have the circuit in black. But I would like to add the red part (label and arrows, no matter the color) using Circuitikz. Here is the code I'm using: \begin{circuitikz}[american, scale = 0.7, ...
4
votes
1answer
68 views

To label different parts of pdf page

Assume you have a PDF file with 3x4 pictures. You want to label each picture. How can you label such pictures without cutting manually each picture out separately? Next problem is how you can show ...
4
votes
1answer
340 views

Differing left and right axis labels in psplot

This question is related to psgraph with y-axis on left and right of graph and axis labels but can stand alone, as it is really about loops and variables. I'm really sad that I have to ask this ...
4
votes
1answer
561 views

Labeling a box in tikz

As shown in the working example below, I have red box around all the boxes. I want to label the box but I couldn't manage to do it. I tried to use some of the ways in given in the tikz examples but I ...
4
votes
1answer
103 views

Label inside mdframed messes up spacing

I have a problem with mdframed in combination with \parskip and \label. Consider the following code, which is a MWE stripped down from a large document. \documentclass{article} ...
4
votes
1answer
5k views

labeling edges in tikz [duplicate]

I have the following graph, where I want to label the edges. Is there a way I can integrate this in to the draw command? { \begin{figure} \begin{center} \begin{tikzpicture}[every node/.style={circle, ...
4
votes
1answer
384 views

Positioning Labels in Asymptote

How can I control the position of the $x$ label below? Created with draw("$x$",O--X,blue,Arrow3) I know I can manually control label positions with label("$x$",<position>,blue), but is there a ...
4
votes
1answer
209 views

circuitikz label malfunction

This may be a total newbie problem, but I cannot find a single reference of this behaviour anywhere I look and thus this question: This is my code: \documentclass{article} ...
4
votes
2answers
251 views

How can I find the location (coordinates) between two ticks in pgfplots?

I would like to change the behavior of pgfplots for the placement of tick scale labels and units. My desired placement would be or between the last two ticks or in place of the second last tick. For ...
4
votes
1answer
371 views

How to remove multiply-defined label in pgfplotstable using longtable

I need to add caption to a longtable possibly with a label to reference in text, however SIAM format fails when it encounters multiply-defined labels because of the repeated caption. Is there an easy ...
4
votes
1answer
164 views

Creating labes on diagram edges

I want to add labels 3, 4, 5 on tree edges like you can see on picture, but I don't know how :( My minimal example: \documentclass{article} \usepackage[T1]{fontenc} \usepackage{tikz} ...
4
votes
1answer
1k views

How to put an itemize label on multiple lines?

I was wondering if it was possible nicely display a long label when using the itemize environment? e.g.: \begin{itemize} \item[long ugly displaying label] Stuff \subitem more stuff ... ...
4
votes
1answer
27 views

newcommand with optional argument displays wrong text

I tried to set up a new command with optional arguments. The problem is that the command displays 'st:code'. What's wrong? Thanks in advance! \documentclass[a4paper,twoside,10pt]{report} ...
4
votes
1answer
81 views

How to print “string” of first or last \label{string}, in running headers and margins, dictionary-like, with KOMA class?

I need to typeset a book where sections are identified by a string, like "PLA 1", as dictated by the book's editor (the publisher calls these strings "cite-keys".) Sometimes there are a few sections ...
4
votes
1answer
195 views

How to add labels to polar plot / polar comb in polaraxis and show FULL coordinates?

In pgfplots, I am trying to: for a first figure: label 12 polar plots plotted on the bases of 12 tables (values given in cartesian coordinates) without showing a legend but adding a label directly ...
4
votes
1answer
184 views

Labeling several out/incoming lines collectively in Feynmp?

Suppose I have two outgoing lines in Feynmp, o1 and o2. I know how to label each and one of them. But suppose I want to draw a huge curly bracket going from o1 to o2 and then label that bracket. Is it ...
4
votes
1answer
86 views

Placing labels as numbers at the top of each bar in this plot in pgfplots

I have this bar chart where numbers seem to appear to be not centered at the top of each bar. I tried writing "center" in the \node area, but it did not work. The code is written using pgfplots. The ...
4
votes
2answers
89 views

create label for graphics inside table cell and also add to table of contents

I would like to create a few command that allows me to reference figures inside a table and add the reference to the table of contents. \newcommand\fig[2]{ \addtocounter{figure}{1} ...
4
votes
1answer
490 views

Labeling Edges in a Weighted Digraph

I would like to have the labels of the edges of a weighted digraph positioned "beside" (north, south, east, west, etc.) the arrows. I have already created the digraph with: \documentclass{article} ...
4
votes
1answer
2k views

LaTeX gives warning - empty label `' multiply defined

I have a LaTeX document that works fine, but it does give a warning message every time I compile it. Here is the text of the warning message: LaTeX Warning: Label `' multiply defined. The name ...
4
votes
1answer
880 views

Circuitikz place text above and below component

Lets say I create a component like this (0,0) to [R, l^=$R1$] (0,2) How can I make it so that the value, R1, is say, on the right hand side, and the resistance, say, 1kohm is on the left hand side? ...
4
votes
1answer
209 views

Aligning marginal notes with center of line rather than baseline

I would like to have all references in my document (to equations, figures, lemmas, random locations in text, etc.) be numbered in the same series, and I would like these numbers to appear in the ...
4
votes
1answer
33 views

Counter not incrementing when defining crefname with cleveref and algpseudocode

I am renaming the "line" label for lines in the algorithmic environment, since I am using the default label for lstlisting environment. As soon as I add define \crefname for it, the counter does not ...
4
votes
1answer
158 views

How can component and voltage labels be positioned so they are properly aligned with components?

I have coded the following circuit: \documentclass{article} \usepackage[american]{circuitikz} \begin{document} \begin{circuitikz} \draw (0,4) to [C,v^=\(v_c\),*-*] (0,1) to [short] (0,0) ...
4
votes
1answer
195 views

Text over picture with white space

I'd like to label some level curves with values that are superimposed over the level curves, creating white space around the labels so that the underlying curves appear "broken". I figured a simple ...
4
votes
1answer
920 views

Label near start when using myncbar

My problem is quite simple, yet i can't find answer. Pre: \usepackage{tikz} \usetikzlibrary{matrix, shapes, arrows, positioning, fit, calc} Styles: \tikzstyle{decision} = [diamond, draw, ...
4
votes
0answers
71 views

how to define a label in a new environment?

I would like to define a new environment for writing exercices. Moreover, I would like to use \ref and \nameref (with hyperref package) to build a table of exercise numbers and names. I wrote the ...
4
votes
1answer
227 views

Set labels to column title in a stacked bar graph

I was trying to build a stacked bar graph which displays the labels of the columns title not in a legend, but directly near the bar itself. So far, I came up with the following: ...
4
votes
0answers
77 views

How can I 'uniquify' RefTeX label defaults?

When you create a new section within AUCTeX (using C-c C-s) and give the section a name, RefTeX will prompt you for a title, insert the section, and then prompt you for a label. This label is ...
4
votes
0answers
250 views

3d axis label ovelapping [closed]

I'm using matlab2tikz to generate the tikz code for my figures. When compiling the document with the figure code as below, I get an ovelapping with the axis label y and z. Here is what I've got: ...
3
votes
4answers
992 views

Tikz: define label font size under the node

I create a picture of array which consists of nodes. I wonder how I can set the font size for the label which is below every cell (for example make it as scriptsize). This are my definitions: ...
3
votes
3answers
218 views

Plotting functions and denoting equation on the figure

How can I plot the functions P=20-1/5*Q and P=5+1/9*Q so as to find the equilibrium point? The figure I need is like the following: Furthermore, how could I put the equation on each ...
3
votes
1answer
895 views

Axis Environment Tick Labels as Text (Including a $)

I am attempting to use the axis environment to build a simple plot line. Is it possible for tick labels to be renamed as text? Instead of numbers I would like the month on the x-axis, and in ...
3
votes
1answer
130 views

Labels in 3D mode don't work in Asymptote

When I create 3D asymptote graphics, labels just don't work. When I copy the code from the question in Positioning Labels in Asymptote I get the exact same plot just without the "x". Everything works ...
3
votes
2answers
97 views

How to move one y label to the right

As you see the image below, the label "4" on y-axis gets in the way with the plot. How do I move it to the right? I tried adding the following statement: psyTick[ylabelPos=right](4){4} But ...
3
votes
1answer
92 views

How do I move the x labels to the left but move origin label to the right?

See below for the code that generates the image below. How do I move the x labels out of the way to the left, but move the zero to the right? \documentclass[border=12pt]{standalone} ...
3
votes
2answers
183 views

How can I use \centerdot while defining type of bullet?

The problem: I get an undefined control sequence error when trying to define the bullet type of the second-level items. I'm using: \renewcommand{\labelitemii}{$\centerdot$} Notes: I've read in ...
3
votes
2answers
2k views

Referencing a table vs. a figure in LyX, format

Currently, when I reference things using labels I have setup LyX simply inserts the table number. I would like it to insert Table N where N is the table number. Similarly, I would like it to insert ...
3
votes
1answer
60 views

Draw and label arcs to label angles

I have written the following in LaTeX. I have trouble drawing and labeling all my angles (I want to label the angles in B, C, D and F. I have so far only managed to draw those in C (easier because ...
3
votes
2answers
134 views

Showing labels only at edge of grouped PGF plots

The options xlabels at and ylabels at in PGFplots' grouped plots library are supposed to show axis labels only at the corresponding sides of the complete set of plots, but they seem to have no effect. ...
3
votes
1answer
535 views

Circuitikz: Label space control

I have problem with vertical spacing between part reference and components (resistor R2, R3). I wish to have text more closer to resistor. And second problem are position of the text for voltage ...