{landscape} is one of the two most common types of page orientation, the other one being portrait.

learn more… | top users | synonyms

0
votes
0answers
13 views

Blank page generated when using `\subsection{Results}` inside landscape

I have a problem when using the landscape feature in LaTex. Specifically, if I include the \subsection{Results} inside the landscape a blank page is generated in landscape before the page of interest. ...
1
vote
0answers
22 views

Should I turn around header and footer when I use landscape?

I have a general question about layout, thus I don't deliver a MWE yet (if you want one, please tell me). In my appendix, I use a lot of landscaped pages for longtables. The tables are several pages ...
1
vote
1answer
34 views

Insert a fullpage landscape figure without having to manually cut text

I have a document with a lot of text and I want a fullpage landscape figure to be inserted somewhere in the middle. I have two options: Use a normal figure and rotate it, but this makes it annoying ...
2
votes
1answer
27 views

I am trying to number the table properly but latex doesn't seem to recognize the label

I have the following longtable: \documentclass[12pt, oneside]{book} \usepackage{graphicx} \usepackage[a4paper,margin=1in]{geometry} \usepackage{pdflscape} \usepackage{caption} \usepackage{csquotes} ...
15
votes
4answers
7k views

How to translate and rotate the heading of landscaped pages?

Objective How to change the heading of landscaped pages from to ? Minimal Code \documentclass{book} \usepackage[a5paper,hmargin=3cm,vmargin=5cm]{geometry} \usepackage{lscape,lipsum} ...
1
vote
0answers
21 views

Landscape table and notes

Two questions I have seven tables, two of them should be landscape instead of portrait. How do I make the landscape ones? What do I need to change/add to the below for the landscape tables? I am ...
4
votes
1answer
28 views

How to float table in landscape environment

I have a wide table, so I put it into the landscape environment. Unfortunately, the float does not work any more. The new page in landscape begins exactly where I included it. ...
2
votes
2answers
39 views

Formatting table lines in landscape using tabularx: they stop halfway through

The lines in the table somehow stop halfway through the table. Any advice would be much appreciated! \documentclass[11pt,a4paper]{book} \usepackage{booktabs} \usepackage{tabularx} ...
1
vote
0answers
25 views

Vertical align with subcaption package

I'm using the subcaption package (\usepackage{subcaption}), but it seems that in landscape mode the the figure is not vertically centered. \begin{landscape} \begin{figure}[t] ...
2
votes
2answers
37 views

Rotate landscape for single page and also the pagenumber?

I found here on tex.stackexchange.com an excellent & beautiful portrait-but-1-page-landscape-table snippet (see below). This is exactly what I need, however I want a pagenumber, but when I ...
3
votes
1answer
46 views

How to change from Landscape to Portrait for the rest of the document

I'd searched a while for changing the orientation of my LaTeX document from landscape to portrait in a way, that I can include other pdfs with \includepdf[..]{..} without messing around with my ...
1
vote
1answer
95 views

Support sections on the bookmark in landscape mode

I'm writing a book and I want to put a unnumbered chapter (chapter*), where I will discuss the results and then put the results in tables. These results are divided into three options, so I want to ...
0
votes
2answers
38 views

Landscape mode makes landscape page too small

I used the instructions from how-to-change-certain-pages-into-landscape-portrait-mode to create a table with plots in landscape mode. The page is turned , but with the left side up, instead of ...
122
votes
3answers
85k views

How to change certain pages into landscape/portrait mode

How can I change some pages into document into landscape mode, while leaving the others in portrait mode (or vice versa)?
6
votes
2answers
5k views

sidewaysfigure and landscape

I have some figures which I wish to display in landscape, with rotated captions. I can achieve this fine using the sidewaysfigure environment from the rotating package. I want to also ensure that ...
6
votes
1answer
196 views

lscape rotates the whole document

I have been struggling with this for a couple of hours: Including the package lscape immediately rotates the whole document. I have no clue why it happens. The document is very simple: ...
0
votes
0answers
33 views

how to remove half line in twocolumn in first page?

I want half line in twocolumn article but in first page like this first page second page \documentclass[landscape,12pt]{article} \usepackage[margin=1cm,top=1.3cm,bottom=1.3cm,headsep=5mm] ...
0
votes
0answers
32 views

longtable overwrites bottom margin

I'm a newer Latex programmer. I'm working on an existing project (I must fix some problems) and I have a problem with a longtable. It overwrites the bottom margin and i lose one rows (in this case ...
1
vote
1answer
28 views

Inserting a vertical table in a two column article

I'm writing an article in a a twoside format and I want to insert a vertical table in one of the columns so I can write up the results in the next column. Following several threads from this webpage ...
2
votes
2answers
76 views

Horizontally and vertically center a figure and scale to fill the whole page in landspape orientation

I want to have an image that fills a landscape page. I have tried: \documentclass[a4paper]{report} \usepackage[utf8]{inputenc} \usepackage{pdflscape} %Gives us landscape pages with ...
0
votes
0answers
26 views

included pdfs won't rotate using pdflscape

As far as I know pdflscape is able to rotate pages* horizontally if you use the landscape option. However, this won't work with included pdfs for me. Is there a syntax I have overseen? turn=false ...
0
votes
0answers
34 views

landscape multipage table issue with following page

I have a large table which I want to present in landscape with a caption. Everything is working so far, except that I am having a blank page in front of my table. I found out that I should use the ...
0
votes
0answers
21 views

landscape table in horizontally oriented page

I'd like to insert a table in landscape form but I'd like page's orientation to remain horizontal. In the page, there would be only the section's title and the table. I've got them but in separate ...
0
votes
1answer
31 views

Flip a landscape environment

I have a page that needed to be in landscape mode, so I've used something like: \documentclass[a4paper,12pt]{report} \usepackage{lipsum} \usepackage{pdflscape} \begin{document} \lipsum ...
1
vote
0answers
35 views

How do I adjust landscape tables in this journal template?

I am trying to design landscape tables within a journal template (jfm.cls). Here is an example table: There are two issues with this table: The journal automatically adds a toprule and ...
0
votes
0answers
41 views

Table + caption in landscape on same side as section header

I am working on my master thesis, and I would like to add two tables as an appendix. There will be a header on the first page ("Appendix"), and I would like the two tables to be in landscape, along ...
18
votes
2answers
33k views

Landscape figure in LaTeX

I have a figure I'm trying to insert which is in landscape and I'm using the following (snipped) code: \documentclass[12pt, oneside]{book} \usepackage{graphicx} \usepackage{wrapfig} ...
2
votes
2answers
52 views

Mismatched figure positioning in twocolumn landscape format

I'm trying to create a twocolumn landscape document with four images per page (two per column, two columns per page). Except for the first figure, all are identical in form. The first figure is to ...
2
votes
2answers
78 views

can't draw a line far enough to the right in a pspicture in landscape

I want to use pspicture in a landscape document, but I can't draw a line to the right hand side of the document with \psframe, while \rput works as expected. I've tried to create an MWE to demonstrate ...
1
vote
1answer
24 views

Page not in correct size or format

Total newbie here: please bear with me. I’m running TeXShop on a Mac, trying to render a single-page musical score that uses the “bagpipe” macro-package. The file starts with %&bagpipe \input ...
1
vote
0answers
41 views

How do I make the landscape option of documentclass work?

When i use landscape option of documentclass, It only rotates the paper and leaves the text as portrait, so the text almost touches the right margin. How do i use the landscape mode properly by ...
0
votes
0answers
30 views

Using Titleps package to put header on a landscape page

I used fancyhdr and the solution of the how to use fancyhdr package to customize headers in landscape page post to create header on the top of landscape page. but i got familiar with Titleps package ...
4
votes
1answer
121 views

how to use fancyhdr package to customize headers in landscape page

I have used the fancyhdr package to customize the header of my pages. However, when I want a page to be landscape (by using the pdflscape package), it does produce a page in landscape orientation, but ...
4
votes
1answer
46 views

Two-column text within a caption environment

I have a particularly wide figure with a particularly long caption that I've lovingly put in a landscape page in a memoir document with pdflscape. As the figure is relatively thin and wide, and the ...
0
votes
1answer
41 views

Page content turns back to portrait within `landscape` environment

I have some wide tables, so I decided to use landscape orientation to show them. I use the landscape environment from the lscape package to achieve this. Unfortunately, I am experiencing some strange ...
3
votes
2answers
95 views

Landscape A3 page in Portrait A4 Document - adds a blank page or reorients previous page - please help!

I've got an landscape A3 page in an A4 document, but the way I've written the code, it requires a blank page, or orients the previous page landscape too. Can anyone advise? Also, is there an easy ...
3
votes
1answer
122 views

Sideways table not centered in the page

I'm writing a paper in the format of Monthly Notices of the Royal Astronomical Society (MNRAS). I have several tables I need landscaped since they are too wide. I have used the sideways table command ...
4
votes
2answers
103 views

Remove white space before landscape

I am inserting a landscape figure. \begin{landscape} \begin{figure} \centering \includegraphics[width=\linewidth]{figures/sensor_diffs.jpg} \caption{Example of a single rep in which sensors are fused ...
0
votes
0answers
48 views

incompatible packages: pdflscape and longtable

Since my previous question lead up to this quite different problem: I use \documentclass{scrreprt} \usepackage{graphicx} \usepackage{pdflscape} \usepackage{longtable} However, I immediately get ...
1
vote
1answer
62 views

Including a matrix of math nodes in a TikZ figure in a minipage in a landscape in an afterpage

I want to include a TikZ figure, containing a matrix of math nodes, displayed in landscape mode on its own page in my thesis, in such a way that the nominally surrounding text, which is in fact on the ...
0
votes
1answer
49 views

forrest hierarchical diagram that will fit in landscape mode for 8.5“ by 11” document

Is there a way to use the pictured hierarchical diagram and load it into latex so that it fits into landscape on a 8.5" by 11" document that won't affect header and footer/page number? somewhat new to ...
0
votes
0answers
42 views

landscape/sidewaystable inside mdframed box containing text and another table

I would like a landscape/sideways table in an mdframed box which contains some other text. I would like to insert a sidewaystable in it. The table is too wide to fit in the portrait mode of the ...
3
votes
2answers
2k views

Vertical orientation landscape page in a PDF output file

I'm using the lscape environment to produce landscape pages in my LaTeX document for pages that have large figures or tables, so that my page numbering is in the right place when it comes to printing ...
2
votes
1answer
47 views

Trying to display a 40 x 40 table in landscape mode

My first problem was just trying to get the table to look OK. I did this by adding a "double align" (two &'s between elements) and a \tiny font size. When I put the table in landscape mode, I get ...
2
votes
1answer
68 views

The label number for a longtable in a landscape enviroment skips by one - help?

I have typeset a longtable in a landscape in each of 2 subsubsections right after one another (in the appendix of my document, actually). There are just a few sentences in each subsubsection before ...
0
votes
4answers
4k views

Landscape mode causes a blankpage

I'm using this code for showing an image in landscape mode: \begin{landscape} \begin{figure}[H] \centering \includegraphics[width=\hsize]{./images/SelectDVA.png} \caption{DVA part of the Use Case ...
3
votes
3answers
204 views

How can I maintain the current page nodes for portrait when temporarily entering landscape mode in TikZ?

Question How can I keep the current page nodes aligned with the same physical corners of the page in a document where the main layout is portrait, but some pages with longtable are in the landscape ...
3
votes
1answer
435 views

Keeping header “on top” in landscape mode

When using pdflscape and fancyhdr, the headers also get rotated. Whilst it's a normal behaviour in most cases (especially when the document has to be printed), I am dealing with a report which will ...
4
votes
1answer
101 views

How can I orient a figure in landscape only when it is placed on its own page?

Floats sometimes end up placed on a page of their own. When this happens, I'd like them to be rotated to landscape mode so that they take up the whole page. sidewaysfigure from the rotating package ...
0
votes
0answers
48 views

Landscape option do not rotate the page on documentclass instruction

When the landscape option is used, the paper does not rotate. But, when this option is used with the geometry package, it works. The following minimal example, ilustrates what I say. To use with ...