{landscape} is one of the two most common types of page orientation, the other one being portrait.

learn more… | top users | synonyms

3
votes
2answers
34 views

Landscape A3 page in Portrait A4 Document - adds a blank page or reorients previous page - please help!

I've got an landscape A3 page in an A4 document, but the way I've written the code, it requires a blank page, or orients the previous page landscape too. Can anyone advise? Also, is there an easy ...
3
votes
1answer
51 views

Sideways table not centered in the page

I'm writing a paper in the format of Monthly Notices of the Royal Astronomical Society (MNRAS). I have several tables I need landscaped since they are too wide. I have used the sideways table command ...
4
votes
2answers
41 views

Remove white space before landscape

I am inserting a landscape figure. \begin{landscape} \begin{figure} \centering \includegraphics[width=\linewidth]{figures/sensor_diffs.jpg} \caption{Example of a single rep in which sensors are fused ...
0
votes
0answers
29 views

incompatible packages: pdflscape and longtable

Since my previous question lead up to this quite different problem: I use \documentclass{scrreprt} \usepackage{graphicx} \usepackage{pdflscape} \usepackage{longtable} However, I immediately get ...
1
vote
1answer
38 views

Including a matrix of math nodes in a TikZ figure in a minipage in a landscape in an afterpage

I want to include a TikZ figure, containing a matrix of math nodes, displayed in landscape mode on its own page in my thesis, in such a way that the nominally surrounding text, which is in fact on the ...
0
votes
1answer
25 views

forrest hierarchical diagram that will fit in landscape mode for 8.5“ by 11” document

Is there a way to use the pictured hierarchical diagram and load it into latex so that it fits into landscape on a 8.5" by 11" document that won't affect header and footer/page number? somewhat new to ...
2
votes
1answer
52 views

can't draw a line far enough to the right in a pspicture in landscape

I want to use pspicture in a landscape document, but I can't draw a line to the right hand side of the document with \psframe, while \rput works as expected. I've tried to create an MWE to demonstrate ...
0
votes
0answers
23 views

landscape/sidewaystable inside mdframed box containing text and another table

I would like a landscape/sideways table in an mdframed box which contains some other text. I would like to insert a sidewaystable in it. The table is too wide to fit in the portrait mode of the ...
3
votes
2answers
1k views

Vertical orientation landscape page in a PDF output file

I'm using the lscape environment to produce landscape pages in my LaTeX document for pages that have large figures or tables, so that my page numbering is in the right place when it comes to printing ...
2
votes
1answer
46 views

Trying to display a 40 x 40 table in landscape mode

My first problem was just trying to get the table to look OK. I did this by adding a "double align" (two &'s between elements) and a \tiny font size. When I put the table in landscape mode, I get ...
2
votes
1answer
54 views

The label number for a longtable in a landscape enviroment skips by one - help?

I have typeset a longtable in a landscape in each of 2 subsubsections right after one another (in the appendix of my document, actually). There are just a few sentences in each subsubsection before ...
0
votes
4answers
3k views

Landscape mode causes a blankpage

I'm using this code for showing an image in landscape mode: \begin{landscape} \begin{figure}[H] \centering \includegraphics[width=\hsize]{./images/SelectDVA.png} \caption{DVA part of the Use Case ...
3
votes
3answers
142 views

How can I maintain the current page nodes for portrait when temporarily entering landscape mode in TikZ?

Question How can I keep the current page nodes aligned with the same physical corners of the page in a document where the main layout is portrait, but some pages with longtable are in the landscape ...
2
votes
1answer
107 views

Keeping header “on top” in landscape mode

When using pdflscape and fancyhdr, the headers also get rotated. Whilst it's a normal behaviour in most cases (especially when the document has to be printed), I am dealing with a report which will ...
114
votes
2answers
69k views

How to change certain pages into landscape/portrait mode

How can I change some pages into document into landscape mode, while leaving the others in portrait mode (or vice versa)?
4
votes
1answer
97 views

How can I orient a figure in landscape only when it is placed on its own page?

Floats sometimes end up placed on a page of their own. When this happens, I'd like them to be rotated to landscape mode so that they take up the whole page. sidewaysfigure from the rotating package ...
0
votes
0answers
36 views

Landscape option do not rotate the page on documentclass instruction

When the landscape option is used, the paper does not rotate. But, when this option is used with the geometry package, it works. The following minimal example, ilustrates what I say. To use with ...
1
vote
1answer
72 views

Adjusting figure and caption in rotated minipage on landscape

Already the title sounds complicated since I need to use the caption on the side of the rotated image in landscape mode. I tried some spacing as you see in lines commented with %, but it did not work ...
3
votes
1answer
80 views

Tables in landscape mode

I need to show Excell table below in landscpe mode including the colours of each cell. I have used \begin{landscape} and \end{landscape} but I couldn't fix all the data in the same page. Also I ...
3
votes
2answers
54 views

Formatting longtable to width of landscape page

I'm having trouble formatting the following table to be a landscape page width as well as span multiple pages. I think my issue might be font size and change of column width but I can't seem to fix ...
1
vote
1answer
199 views

Make longtable automatically fit page (line width)

I have a longtable in landscape mode that is automatically split on multiple pages when there are too many rows. I have solved the length problem. Now I have a problem with width, the rows are going ...
2
votes
0answers
58 views

Newgeometry changes all document

I am trying to set different margins for some pages of my Thesis. Essentially, I want some pages to have larger margins, since they contain big tables. I use the \input command to include big Tables ...
0
votes
0answers
44 views

Orientation of landscape longtable on actual page

In my article I have a longtable in landscape orientation. On the first page the orientation of the table is right. The problem is the orientation of the table on the second page. It is the same then ...
1
vote
1answer
44 views

Rotate title page using landscape with colontitles

I'm using landscape to rotate title pages. The problem is that title page is not limited and may require more than one page. And there are different colon-titles in first and others pages. I want the ...
5
votes
2answers
114 views

Adjust margins for long table on a landscape page

My minimum working example: \documentclass{article} \usepackage{longtable} \usepackage{lscape} \usepackage{array} \begin{document} \begin{landscape} \section{My First Section} ...
5
votes
2answers
133 views

Extra space on right hand side of table

I have a table in landscape mode, and there is extra space on the right-hand side of my table (see yellow circle). What changes need to be made so that the text is spread evenly across the table? ...
4
votes
1answer
260 views

Ensure float appears directly after `\afterpage` and `landscape`

I have a large (full page) landscape figure that I would like to appear on the page opposite to a large (full page) portrait figure. The landscape figure is generated like so: \afterpage{ ...
0
votes
0answers
112 views

Section heading and figure on same page (landscape)

first my example: \documentclass[a4paper,abstracton]{scrartcl} \usepackage{graphicx} \usepackage{float} \usepackage{lscape} \usepackage{rotating} \begin{document} \section{Appendix} %EXAMPLE #1 ...
0
votes
0answers
17 views

Full width landscape image in koma script [duplicate]

I need an image the biggest possible and then show it in landscape. I use koma options in a classic thesis flavour. I don't find any solution to have it bigger than the textwidth but staying in the ...
0
votes
1answer
92 views

Place a table on a new landscape page in a two column paper

Very related to this question and some of the comments therein, I need to insert a landscape page for a wide table, in a two column document. As suggested there, I have tried to use \afterpage{% ...
3
votes
1answer
235 views

Landscape Picture + Table format

I'm using latex, and memoir, and I want to create a page template that would always take one and only one page, containing a picture that is aligned to the left of the page, and always fitted inside a ...
3
votes
1answer
98 views

Need help starting long, text-heavy table

I am new to LaTex and trying to teach myself. Currently I am trying to write a unit plan for graduate school (MA in Math Ed), which would look something like that provided image. One question, one ...
0
votes
1answer
56 views

Landscape table will not be in centre of page

I read all the questions and answers on this, but they only left me more confused. I want my table to be in the centre of the landscape page, but it's always aligned on the left instead. Is there a ...
1
vote
1answer
187 views

Longtable, landscape in tufte-latex

I am using tufte-latex to write a document. I want to include a table which has many columns and rows in the document. For this purpose I am using longtable and landscape environments to produce the ...
0
votes
2answers
159 views

Change margin on a single landscape page in memoir

I have a document where I use memoir and I want to make a single landscape page with a big table where I need to change the margins for this page only to make the table fit. I have tried using the ...
3
votes
1answer
112 views

lstlisting in landscape and heading in portrait

I am trying to include some code files in landscape mode into my document which is in portrait mode. I do this using the \usepackage{lscape} and \usepackage{listings} So far so good. The ...
0
votes
1answer
86 views

Landscape and header formatting [duplicate]

Hello I am really new at this. I am trying to represent a .pdf with the following specifications: -a4 papper -orientation: landscape -Special header with three divisions -after header divide in 4 ...
3
votes
1answer
107 views

Margin notes on the wrong page when using landscape in memoir

I have tried several similar to the following code, but the best that I can get is the marginpar on one side and the figure in the following. The first \marginpar{\lipsum[11]}\lipsum[1] is positioned ...
3
votes
1answer
105 views

Why do I get an extra white page before my TikZ picture?

I've created a little diagram in TikZ. Only problem is, it's quite big, so I figured I should use landscape mode for it. Only problem is, when I put it between \begin{landscape} ...
1
vote
0answers
72 views

How to put 2 correlation matrices on the same page in landscape? [closed]

I am trying to fit 2 correlation matrices on the same page on a landscape format. Here is what I use: \begin{landscape} \begin{table}[htbp]\centering \caption{Correlation matrix, group ...
3
votes
2answers
364 views

Problems with \newgeometry by using landscape and minipage

I try to rotate a tikz-tree and a table which are in a minipage environment by using \landscape because the tree besides the table is to wide. Now, the tree and the table are not centered. The last ...
3
votes
1answer
90 views

Landscape table in multicol-environment

I am facing a very weird problem; see the output: I am trying to get my table in the landscape mode within a two-column layout. Therefor the package "multicol" is used. The table does not appear on ...
0
votes
0answers
103 views

Convert .R into Latex

I'm really new at this and I couldn't found any realted subject. So I've created my .R file where I generate my graphs from my data: barplot(wmaefile$FC,xaxt="n",col="snow2",border="black", ...
3
votes
2answers
117 views

How to fit the table into landscape mode

The below method works great for a regular table. I was wondering if there is a command phrase to shrink/resize the table in the sideways mode. I think problem is because of \textwidth which obviously ...
9
votes
3answers
23k views

How to shift graphics/adjust placement of figure with \includegraphics

I composed a diagram that takes up the entire sheet of paper in landscape mode, called diagram.tex (compiled it to generate pdf). I'm trying to include that into an article, but only half of it is ...
0
votes
1answer
40 views

How to put 2 cols in landscape oriented page?, 1col for 1figure, other for comments?

How can I obtain any similar to the image? I was trying with similar things to \documentclass[12pt,a4paper,x11names,landscape]{article} \usepackage{lipsum,mwe} \usepackage{incgraph,graphicx} ...
4
votes
1answer
910 views

Landscape forces premature pagebreak

After some trouble I have managed to make a table in landscape orientation that breaks over three pages. I used tabularx and the landscape package. Now my problem is that the thing won't float like ...
2
votes
1answer
55 views

Centering two tables in landscape modus

The posts seems very similar to the one's already posted two tables side by side in landscape mode but I have difficulties centering my first tables in the middle of a landscape page. This is only a ...
3
votes
2answers
129 views

Table in landscape mode

I would to make the table in landscape mode. To do that, I used pdflscape package. But I couldn't get the desired result. How to do that? Here is the MWE: \documentclass[12pt]{article} ...
3
votes
3answers
285 views

Landscape table without creating new page

I am having problems with a table in landscape orientation. This table occupies an entire page and it is preceded by a chapter title. Even though there is nothing else on the page, the table is placed ...