{libertine} is about the Linux Libertine font which can be loaded with the package of the same name.

learn more… | top users | synonyms

3
votes
2answers
116 views

Suppress character substitution in xetex

I have a situation where I need to place a combining ring above (U+030A) the character 'j'. Yes, it is silly, because the ring would collide with the dot above the 'j', but I want to combine them ...
4
votes
1answer
148 views

Can I use these Libertine glyphs in pdftex?

MWE: \documentclass{article} \usepackage{iftex} \ifXeTeX\else \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \fi \usepackage{libertine} \begin{document} \ifXeTeX ...
6
votes
2answers
332 views

Scale font only vertically (poor man’s condensed of Libertine)

I’m using Linux Libertine to typeset the translation of a poem with eledmac/eledpar. The original text appears on the left pages and the translation on the right ones. Since the translated verses are ...
2
votes
0answers
249 views

XeLaTeX Bad/Inconsistent Kerning [closed]

I'm running xubuntu 12.04.3 LTS with tex-full 2013 package. The kerning is terrible. For example, I have fonts-linuxlibertine 5.3.0 installed, latest and greatest; when I compile using XeLaTeX, both ...
5
votes
1answer
417 views

Linux Libertine Bold Math

I'm using Linux Libertine everywhere in my document. However, I cannot figure out how to get bold math \mathbf to display as bold text. This answer seemed related to this problem, but trying that ...
2
votes
1answer
378 views

Using two different Sans Serif fonts eliminates bold font

Say I want to have my document in the default sans serif font, but I occasionally wish to have some other features in the document be in a different font. I am using \usepackage{libertine} to load ...
3
votes
1answer
677 views

Using Linux Libertine fonts for math without newtxmath

I'm trying to use Linux Libertine as the math (and main) font, and I used this answer to set the math fonts. However, the math output is still CM. \documentclass{minimal} \usepackage{amsmath, ...
1
vote
0answers
142 views

Libertine and Biolinum KeyCap Macros

For no obvious reason reason the use of the following example \documentclass{scrartcl} \usepackage{libertine} \begin{document} \LKeyCtrl \end{document} produces the following error of an ...
4
votes
1answer
164 views

Using ligatures from Linux Libertine for numbering sections and in TOC

The old Libertine package, which worked with pdfTeX, included a command \libertineGlyph{}. \libertineGlyph{Fourroman} printed Ⅳ But how can I get these roman numbers used for numbering sections ...
8
votes
2answers
605 views

Libertine newtxmath and text (oldstyle) figures in headers

This is closely related to the OP with title "lining figures in tables and math, old style figures in text", and to the answer provided therein. The following (semi)MWE is to be run with pdfLaTeX: ...
6
votes
1answer
319 views

Linux Libertine small caps fail for some Unicode characters

I'm using XeTeX and Linux Libertine, since I want "true" small caps. However it seems that the small caps don't work for certain Unicode characters. Here is a minimal example: \documentclass{article} ...
7
votes
1answer
324 views

Small Caps Kerning for “Va” in Linux Libtertine (XeTeX)

Has anyone else noticed this kerning error in Linux Libertine small caps...? What are the (1) permanent solution & (2) quick local fix? Pretty important initial combo. Here's the code: %!TEX ...
6
votes
1answer
2k views

Bold type and font specification with fontspec

When I manually specify the Linux Libertine O font types fontspec should load, the bold type is significantly bolder than when I load the exact same font family as a system font. MWE: ...
7
votes
1answer
323 views

how to set font feature file for a specific font file and not the whole font shape

I'm looking for having my document set with specific ligatures, such as 's' replaced by 'longs', 's t' by 'longs_t' etc. and using the Linux Libertine G font. To do this, I'm writing my text ...
7
votes
1answer
321 views

Correct libertine glyphs in math mode

When using the libertine package together with newtxmath and pdflatex, the equality and minus glyphs in math mode are not taken from the libertine font which results in too large symbols compared to ...
3
votes
1answer
1k views

Zero error, but no PDF

I just installed texlive2012 on the new distribution Mageia 3, as well as the libertine font .rpm packages. I have a problem with this code : \documentclass[10pt]{article} \usepackage[T1]{fontenc} ...
6
votes
3answers
451 views

How do I get Libertine + Libertine in math mode + historical ligatures + french-style?

I would like to write a document using: Libertine; Libertine in a correct math mode; Historical ligatures; French style of mathematics (upright greek letters and capital letters). I know I should ...
11
votes
3answers
859 views

lining figures in tables and math, old style figures in text

I’m using TeXLive 2012, up to date on Ubuntu 12.10. When I use the libertine package with the option osf and newtxmath for math fonts, I get oldstyle numbers everywhere, but I only want to use them in ...
0
votes
1answer
181 views

libertineGlyph and pdflatex [duplicate]

This is a follow-up question to How to get Wikipedia W from Linux Libertine? How can \libertineGlyph{W.alt} set with pdflatex? This MWE works fine \documentclass{article} \usepackage[T1]{fontenc} ...
12
votes
0answers
496 views

Libertine Mono and lualatex [closed]

Using lualatex on latest TeXLive 2012 I am not able to select Libertine Mono by its full name via fontspec. luaotfload is finding the font and it is written into ...
4
votes
2answers
445 views

\pdfglyphtounicode with XeTeX

One well known problem with using the font Linux Libertine (presumably other fonts too), is that its many ligatures are not recognized in the resulting pdf-file, so that it's not possible to search ...
4
votes
3answers
238 views

XeTeX with CJK: wrong font for numero sign

I'm using XeTeX in a MiKTeX 2.9 environment on Windows. Recently, I've added the xeCJK package to a larger document for including a short passage in Chinese. This, however, caused (among others) the ...
12
votes
1answer
276 views

Should I use the font encoding LY1 with the package libertine?

I normally use \usepackage[T1]{fontenc} without giving it any thought. The package libertine seems to provide more ligatures with the LY1 encoding. \documentclass{article} \usepackage{libertine} ...
8
votes
1answer
302 views

Specifying a different font for polytonic Greek in pdfTeX with Babel

I am writing my master’s thesis with the ulthese class, which is now part of MiKTeX and TeX Live. This class is based on memoir and is fairly flexible, but assumes the use of pdfTeX and sets the font ...
7
votes
1answer
2k views

Font problem with XeLaTeX

When trying to compile my .tex file using the xelatex command in TeXmaker (with MiKTeX), I get this error message: ! fontspec error: "font-not-found" ! ! The font "Linux Libertine O" cannot be ...
1
vote
1answer
100 views

Macron in section heading merges into letter

I have a section heading that includes the word 'erōs'. I currently have a command mapped which replaces \eros with er\=os, thus printing the macron. The problem is that in the heading, which is bold, ...
1
vote
0answers
350 views

newtxmath, libertine, cm figures [closed]

Newtxmath with libertine and otf is an attractive combination for beautiful mathematics text. But it is inconsistent in that for figures 0,1,2,...,9 within math mode it uses the CM font, not the ...
4
votes
1answer
159 views

Biolinum font bold 11pt issue in tableofcontents [closed]

I found an issue in adopting the Biolinum font, bold face at 11pt, in the tableofcontents. At 10pt or 12pt it works just fine, indeed. But I need to use 11pt. Compiled indifferently under LuaLaTeX ...
8
votes
1answer
859 views

Libertine monospaced font seems to big

I'd like to write a document with the Libertine font (using the libertine package). I have a couple of code snippets in the text, and to me it seems like the Libertine Mono font that is used by the ...
2
votes
0answers
44 views

Strange Error with Libertine and pdfpages [duplicate]

Frequently I have to make a compilation of documents. Each document has been produced with pdfLaTeX, and the compilation is done with pdfLaTeX and the package pdfpages. MWE of my file ...
4
votes
2answers
539 views

Font mismatch with Linux Libertine and siunitx package

Following example: \documentclass{scrbook} \usepackage{amsmath} \usepackage{amssymb} \usepackage{microtype} \usepackage{siunitx} \usepackage{fontspec} \setmainfont{Linux Libertine O} ...
12
votes
1answer
724 views

Microtype package with Libertine font

In the microtype documentation it advices one to use settings that complement one's choice of font. I use libertine font. Does anyone know of any options or settings that specifically suit this font?
3
votes
1answer
169 views

menukeys with LinuxLibertine/Biolinum [closed]

I'm trying to use Linux Libertine/Biolinum in combination with the menukeys package. Unfortunately, switching between the default font (everything scaled properly) and Libertine causes the predefined ...
9
votes
2answers
814 views

Linux Libertine ligatures / T1

The libertine package documentation says It is recommended that the font encoding be set to T1 or LY1 but the default OT1 encoding is also supported. \documentclass{article} % ...
3
votes
1answer
392 views

Spacing & sizing with libertine and newtxmath

I'm using the following setup for the Libertine font: \documentclass{article} \usepackage[T1]{fontenc} \usepackage[lining]{libertine} \usepackage[libertine, cmintegrals]{newtxmath} \begin{document} ...
1
vote
1answer
175 views

Odd allocation of diacritic marks in Linux Libertine

Maybe it is just me (I don't think so, though), but the placement of the diacritic marks in the otherwise wonderful Linux Libertine fonts is quite at odds with any well-informed typographic ...
3
votes
1answer
376 views

Libertine/Biolinum suddenly missing/corrupted?

I'm working with Miktex 2.9 64 Bit on Windows 8 with Texniccenter. Up until yesterday I compiled all my documents without any problems. Today everything seems fine, too, I did not run any Miktex ...
6
votes
3answers
1k views

Problem of Arabic numbers in math mode with 'New TX' math font option [Libertine] compiled by XeLaTeX

Recently i decided to use the Libertine font to write my dissertation, because finally there is kinda math font for Libertine: \usepackage[libertine]{newtxmath}. Since I want to enable of the ...
5
votes
1answer
400 views

Possible to enable historical Ligatures of Libertine font in Ubuntu system?

I searched all of related posts but it seems that there is no solution in this case. I really wann activate the feature of historical Ligatures of Libertine font e.g: In Ubuntu system is it ...
7
votes
4answers
1k views

Texmaker pdflatex compile error with libertine font after updating Texlive 2012

After updating the texlive 2012 in Ubuntu 12.04 by # tlmgr update --all I found pdflatex (within Texmaker) cannot compile a TeX file with the Libertine font \usepackage{libertine} ...
3
votes
1answer
1k views

How to adapt classicthesis layout to B5paper and Linux Libertine

Question says it all: I am using classicthesis with XeTeX to typeset my PhD thesis. I want to use B5 paper size (176 × 250 mm) and the beautiful Linux Libertine font. I'm wondering how to calculate ...
3
votes
1answer
702 views

MikTeX 2.9: libertine suddenly broken [closed]

MikTeX 2.9: 'libertine' seems to have broken at some point today (9 Dec leading into 10 Dec). The following code should produce some material in libertine: \documentclass[a4paper,10pt]{article} ...
7
votes
2answers
458 views

Extracting characters from the new libertine (with pdflatex)

The issue: I need to access e.g. libertine's delta glyph in pdflatex. This question notes that the \libertineGlyph command is no longer provided by the latest version of the libertine package. It ...
5
votes
3answers
416 views

Changing numbers font features while changing shape

I am writing a document with the main font set up with old numbers, but I would like to have the "normal" style in the tables. This works but one particular table has some of the numbers in italic and ...
7
votes
1answer
959 views

\setmainfont{Linux Libertine O} uses pfb files instead of otf

(This is sort of a follow-up to libertineotf and xelatex - bold smallcaps broken?, based on a problem that I had noticed earlier, but hadn't put my finger on.) \documentclass{article} ...
4
votes
1answer
447 views

libertineotf and xelatex - bold smallcaps broken?

It seems like bold smallcaps don't work with libertineotf any longer? I am currently adjusting an old template which I was using with pdflatex, and I need those bold small caps: ...
3
votes
2answers
217 views

LinuxLibertine destroys biblatex's supercite [duplicate]

Possible Duplicate: superscripts with xelatex? (footnotes, natbib) i want to use \supercite with biblatex. It works fine, unless I switch to LinuxLibertine. The font messes up the ...
4
votes
0answers
153 views

Calling all libertines [closed]

I've prepared a package that I hope can replace all current libertine packages (and provide partial compatibility with obsolete ones). If you have libertine-based documents please check it out and ...
8
votes
1answer
570 views

Using ligatures from libertine for roman numerals in pdftex

I am using the Linux Libertine font through the libertine-legacy package with pdftex. This font contains nice ligatures for roman numerals, e.g., \LibertineGlyph{tworoman} gives ii. Now I want to use ...
2
votes
2answers
528 views

Why can't I access alternate glyphs in Linux Libertine when using fontspec?

When I try to build Dario Taraborelli's CV example using fontspec font designations and Linux Libertine O, the ampersand glyph breaks. Here is the MWE: %------------------------------------ % Dario ...