{lists} is about list environments. If your question deals with a specific list environment, add the respective tag, if existing, such as {itemize}, {enumerate}, or {description}. A popular package is {enumitem}. For registers like a "List of figures", use {table-of-contents} instead.

learn more… | top users | synonyms (1)

3
votes
2answers
43 views

top alignment of table in table

I have a small :) problem with latex. I wanted to put an enumeration into a tabular, but this didn't work. Than I worked on a workaround ending up with the following code. My Problem: The cells are ...
5
votes
2answers
64 views

Nested List with Counters and Flush-Left Labels

Presently, I accomplish this with a combination of three user-defined lists. Two of these (examlist for single-digit labels, and exxamlist for double-digit labels) control the top-level items. The ...
1
vote
2answers
66 views

Customizing Lists

Using the enumitem package, is it possible to customize latex lists as shown below?
1
vote
1answer
42 views

Prevent exsheets from creating newline at beginning of question

I want to use the exsheets package for some homework sheets in combination with enumitem. When I encapsulate an enumerate environment inside a question environment, the first item of the enumeration ...
27
votes
2answers
13k views

Changing left margin in itemize environment of beamer class

I can't figure out how to line up the symbols of an itemize environment in beamer with the left part of the main text. In other words, I would like to supress the left margin in beamer itemize lists. ...
5
votes
1answer
37 views

Hyphen Sporadically Appearing In Enumerated List

I am having an issue with hyphens not appearing in an enumerated list using IEEEtran. Sometimes the hyphen will present correctly, and other times it will not appear at all. Here is a working ...
1
vote
1answer
44 views

Second Beamer columns starts list lower (no overlays)

I'm trying to put two lists side-by-side in Beamer columns, but the list items are offset. For some reason, in the second column, the list starts a bit further down. I've tried all sorts of widths ...
0
votes
2answers
31 views

How can I indent paragraphs within an itemize environment?

I'm sorry to ask such a simple question, but I've been searching around without finding a simple way to make each new paragraph indent when I'm in the \itemize environment. Number 6 on this document ...
1
vote
1answer
31 views

Latex document contains only \section{}?

I want to typeset a document with desired output such as: 1. blah blah ... blah blah .... 2. blah blah ... blah blah .... 3. blah blah ... blah blah .... That is simply numbered ...
3
votes
1answer
40 views

Removing indent for second subsection

I'm having an issue where the I have the a section followed by two subsections. The first of the subsections is not indented while the second one is- I would like to remove the second indentation. ...
4
votes
3answers
87 views

Spacing of list of items using enumitem package

I want a list that looks exacly thus: Main text with paragraph indent. Now the list. Notice that the list labels aligns with the left margin, the text and paragraphs thereafter with the ...
1
vote
1answer
29 views

Custom tabulation in enumeration

I want to make a simple document with some exercises and I need to make a list. What I expected is something like MS Word, with a tabulation at left. But I get this: LyX: PDF: I want to get ...
2
votes
1answer
65 views

Customising description lists

Ok folks, I have a slightly bizarre set up and I'm hoping that someone can help. I have an auto-generated .tex file (made by pandoc from markdown) which has a description list as so: ...
3
votes
1answer
188 views

Christmas List / Catalog

I'm fairly new to LaTeX, and I thought a fun project would be to create a Christmas list that looks like a shopping catalog. Something like this: How would I go about this? Any good templates or ...
1
vote
1answer
18 views

No effect when use the command setlist with enumitem and outlines packages

I want to change the default labels of outlines package by using enumitem package, but the \setlist command does not work at all. \documentclass{article} \usepackage{amsmath, amssymb, amsthm} ...
5
votes
2answers
62 views

Highlight indent level

I am writing a reference document that contains a lot of nested lists. In order to highlight the indentation level of each list element, I would like to draw a subtle line in each level of identention ...
10
votes
2answers
30k views

How to add bullets to description lists?

I would like to add a bullet in front of every \item[], i.e. Hello, \begin{description} \item[bla] blubb \end{description} becomes Hello, bla blubb I quickly found how to remove them ...
1
vote
1answer
48 views

Unexpected horizontal alignment when using enumitem

Consider the following example: \documentclass{article} \usepackage{mathtools} \usepackage{enumitem} \begin{document} \begin{enumerate}[ label = \arabic*), itemindent = * ] \item before ...
2
votes
1answer
35 views

Putting labels to itemize makes beamer slide overflow on right margin

MWE: \documentclass{beamer} \usetheme{Madrid} \begin{document} \begin {frame}{Upper gastro-intestinal endoscopy } \begin{itemize} \item[Esophagus] Four columns of grade IV esophageal varices ...
3
votes
1answer
39 views

Format list spacing enumitem, topsep does not work

I am trying to create a list within a table. However, I have a problem with the spacing before and after the list. I do not want any additional spacing due to the itimze/list etc. The first bullet ...
3
votes
2answers
51 views

Different colours (>2) for the bullets in itemize environment

I would like to have a itemize list using several different item colors, at least three. Basically something like described here taking the direction Alan Munn suggested: \documentclass{article} ...
1
vote
1answer
37 views

Show at the end of a document an answer key based on a specific environment

I'm making a list of math exercises for my students. Here's an example of the environment I use to create it: \documentclass[10pt,a4paper,oneside]{article} \usepackage[utf8]{inputenc} ...
2
votes
2answers
79 views

Remove indentation on description list

Ok, I looked at some answers, and they suggest to use the package enumitem and the option [leftmargin=*]. \documentclass{article} \usepackage{enumitem} \begin{document} \section{Foo} ...
1
vote
0answers
37 views

Definition of itemize spacing flags

There are numerous questions on SE (and elsewhere) asking how to change list environment spacings, but a lot of bad, ad hoc answers. The best answer is to use the enumitem package, which allows one ...
0
votes
0answers
35 views

Itemize a text with many lines without writing 'item' explicitly at the beginning of every line

Ok, this may be an easy one but I've been googling a lot without success. I have a long text with many lines separated by the new line character. What I want to do is itemize this text so that every ...
1
vote
1answer
37 views

Multiline brackets within a {description} environment

Is it possible to have multiline brackets within a description environment? For instance, I'm looking to bracket the three items below without switching into a table or array environment. If this is ...
2
votes
2answers
71 views

how do I add line numbers to itemize environment?

I have an itemize environment that I use in a figure to describe, say, an algorithm or a process. I want to include line numbers, all aligned on the left most side of the figure so that I can refer to ...
18
votes
3answers
3k views

How to prevent a page break before an itemize list?

It is not nice to have a page break right after the colon and have the list start on a new page: And here, finally, is the list of mission-critical items: \begin{itemize} ... \end{itemize} How can ...
5
votes
4answers
868 views

Is it possible to use the enumerate/itemize environment within the proof/remark environment in a nice way?

I wish to use the enumerate/itemize environment within the proof/remark environment, but when I do this the first number/bullet-point is on the same line as the word 'Remark'/'Proof' indented to the ...
0
votes
0answers
26 views

Extra empty page for List of tables and list of figures

I am really stuck to that , I always get en extra empty page for list of table and and list of figures and table of contents and all these pages with headers , How I can remove them ?? Here is the ...
4
votes
2answers
76 views

List in a multicolumn in tabularx

I'm trying to insert a list in a multicolumn of a table defined through tabularx: \documentclass[11pt, a4paper]{standalone} \usepackage{tabularx} \usepackage[left=25mm, right=25mm, top=25mm, ...
6
votes
3answers
767 views

Insert a paragraph into a list that uses the whole text width

I want to insert a paragraph or possibly even a box with a background color into a list that uses the whole \textwidth. Something like this: 1st item a subitem 1 b subitem 2 2nd item a ...
1
vote
2answers
57 views

Unseemly spaces at start of lines

I am making solutions to a problem with many parts. I want the parts to be indented by \qquad. The first line is indented about twice as much as the other lines, but I used the commands \noindent ...
5
votes
2answers
50 views

Multiline items in a custom list?

I have the following custom list for generating dates on a syllabus: \documentclass{article} \usepackage{advdate} \usepackage[dayofweek]{datetime} ...
17
votes
2answers
45k views

Using lower-case roman numerals in enumerate lists

when I use \begin{enumerate}[I] \item ... I get I II how I can get i ii ? I try with \renewcommand{\theenumi}{\roman{enumi}} \renewcommand{\labelenumi}{\theenumi} in the begin of ...
5
votes
1answer
57 views

Problem with “\newlist” of the “enumitem” package

I don't know why this code generates an error. ! Package enumitem Error: Undefined label. \documentclass{article} \usepackage{enumitem} \newlist{mylist}{enumerate}{1} \begin{document} ...
0
votes
1answer
42 views

Lists shaped like tables [duplicate]

As the title implies, I would like to find a way to write (ordered) lists in the shape of a table. This is particularly suitable for homeworks, for instance. The solution I came with to use the ...
4
votes
1answer
54 views

Why is \item allowed in proof environments?

The other day I was typing up a proof containing a list and I accidentally wrote \item inside the proof environment (from the amsthm package) but outside of any list environment. To my surprise, LaTeX ...
3
votes
1answer
34 views

Theorem linebreak in an itemize environment

I'm using the itemize environment to take notes and sometimes I want to add definitions and theorems in the flow. However, amsthm adds a linebreak between the item bullet and the theorem statement, ...
2
votes
2answers
205 views

How can I make a list of websites in my book?

I want to make a list of websites in the last pages of my book. Something like the list bellow: List of websites: ----------------------------------------------- website01 ....................... ...
1
vote
2answers
40 views

list/tree with arrows from main word

Can anybody help me to do something like this in LaTeX? Thank you!
4
votes
2answers
112 views

How to create a left section for half of the document

I want to create document like presented below. How do I go about it?
1
vote
1answer
24 views

How to disable list in the rSubsection?

I am working on my resume, and I want to use srSubsection environment. The problem is the current class file only allows entering a list. And I do not know how to modify that to allow inclusion of ...
1
vote
1answer
36 views

How to make a sub-list with numbers (at LyX)

How do I make a sub-list with numbers? i.e.: 1. 2. 2.1 2.2 3. instead of: 1. 2. a. b. 3. Thank you!
2
votes
1answer
60 views

Beamer-Using resizebox changes the position of an item in itemize

I am creating a presentation using beamer. In an itemize environment, I am using resizebox in particular item. When I use it, the position of the bullet changes, as seen in the next image My code ...
2
votes
1answer
17 views

Indentation of Sublists of Wide List

The wide feature of enumitem package effectively makes the item label part of the text, instead of setting the margin of the following text left of the label. I would like to use the wide feature, but ...
2
votes
1answer
24 views

Suppress first new line on list

I want to make entries of the following type: \newcommand{\test}[1]{\hangindent=2em\hangafter=0\noindent\raggedright\footnotesize{#1}\par\normalsize\vspace{1em}} I want entries to contain lists and ...
2
votes
1answer
47 views

Problem with vertical spacing of equations in itemize after the first \item

I found one similar thread here (Removing strange vertical space after first (customized) \item), but I still could not resolve my problem. Please help. Description of the problem: I used beamer ...
0
votes
1answer
53 views

How to reduce indentation in itemize?

I have an itemize block in my latex code (XeTex actually). I wish to reduce the indentation of a multi line item. Can you please help me with this? My code and how it looks are below. ...
3
votes
1answer
698 views

Itemized list is appearing outside of margins

I am writing a memoir document with a subsection that contains a itemized list. This itemized list is not appearing within the margins of text, but instead starts somewhere unknown and only has the ...