10
votes
0answers
247 views
+50

Setting different recto/verso margins size (geometry) on this example

CONTEXT. Because of specific University requirements (1), I had to use this nice code found on tex.stackexchange http://tex.stackexchange.com/a/96366/50507 written by David Carlisle, that was ...
0
votes
0answers
51 views

Twoside margin width. How to take into account binding?

I came here to understand why latex had this "odd" habit to set the outer margin wider than the inner in two sided documents. As many have asked before me, I expected the inner margin to be wider to ...
1
vote
0answers
36 views

How remove margin in a paragraph that continues in two pages with different margin?

I've created a document whose margins have different odd and even pages. I want to write a paragraph with no margin in two pages runs. If I use the command \newgeometry new paragraph starts at the ...
1
vote
1answer
45 views

Issue with the lengths of the margins in article class in twoside mode

Simply, put the solution to my problem is that for everything before the first section, the odd margin must be swapped with the even margin and vice versa. At the first section, everything must be ...
0
votes
0answers
18 views

In Lyx how do I fix the border shift for binding? [duplicate]

WIth regards to piping answers into Lyx GUI, I am continuing the my question from here. The layout of chapters starting on the odd pages appears to be correct, however the shift left or right I ...
1
vote
0answers
102 views

KOMA-Script/Twoside > Extra right margin on odd and even page :-S

I'm trying to use KOMA-Script with scrbook class but whatever I do, I always have an extra margin on the right of every page. Does anyone have an idea to strip of this space ? Here are some ...
5
votes
2answers
399 views

Addmargin on even and odd pages

I have large outer margins and I want some time more text, on the left for even pages and on the right for odd pages. I tried: \begin{addmargin*} ... \end{addmargin*} But the result is good only ...
1
vote
1answer
126 views

twoside page, outside border on right side smaller than on the left

I have to hand in my thesis tomorrow and it's not working. I want to print it like a book (print front and rear of a page). That's why I am using twopages. But the outside border is different for the ...
1
vote
1answer
455 views

Page numbering and binding offset

I have a two-sided document with a few unnumbered introductory pages, and I want to start page numbering from 1 after these pages. To do that, I suppress page numbers with \pagenumbering{gobble}, and ...
5
votes
1answer
96 views

Line numbers on different margins in two-sided document

I'm using the lineno package to print line numbers in my two-sided document, but they are always printed in the left margin. \documentclass[twoside]{book} \usepackage{lineno} \usepackage{lipsum} ...
6
votes
2answers
138 views

Exclude line numbers from margin width

I am using the lineno package to add linenumbers on my twosided document. However, I have a restriction to leave a margin of 2.5cm inner and 4cm outer margin. This has to be completely free space. ...
1
vote
0answers
171 views

A5/B5 papersize book with margin notes

I am trying to make a diary that will have a book-like page structure with side notes in A5/B5 paper size. I was able to create the style I want, but it can only be applied using an article ...
3
votes
2answers
300 views

How to remove margin notes space in book class?

By default, the "book" class produces a layout with a big space for margin notes. One consequence of this behavior is the binding side has a smaller margin than the other side (with the twoside option ...
3
votes
2answers
235 views

KOMA script - widening text width

I have a longtable that is about 14cm wide and the text width of 12 cm. Therefore I would like to widen the text width on two pages for 2 cm, toward the outer edge of the page. I have "discovered" ...
0
votes
0answers
84 views

How to put a symbol always in the right margin, even in twoside mode, like line numbers of lineno?

I discovered the package lineno which in twoside mode of the class article can force to put the line numbers on the right. I really like that because I want me QED symbol to do the same. Currently, ...
3
votes
1answer
221 views

How to use one-sided pages formatting in classicthesis without shifting title page?

I'm using the classicthesis package with the template provided on latextemplates.com (http://www.latextemplates.com/template/classicthesis-typographic-thesis) to write my MSc thesis. I am required to ...
5
votes
2answers
203 views

Specification of the Layout for Q-A Reference Cards (Flashcards, Visual Cards)

I'm relatively new to LaTeX and I've used Microsoft Word so far for virtually all work with documents. For college, to use own question-and-answer reference cards, I decided once to split a portrait ...
4
votes
3answers
667 views

Problem with margins using amsart and geometry packages

I do not want different margins on even and odd sides, I just want the usual page setup from the amsart package. However, consider: \documentclass{amsart} \usepackage{geometry} \usepackage{lipsum} ...
0
votes
1answer
81 views

Problem with margins

I need to set margins. The odd pages should have left margin 3.5 cm and right margin 2.5 cm. The even pages should have left margin 2.5 cm and right margin 3.5 cm. I tried to do it but for example by ...
7
votes
1answer
243 views

Full-width figure, odd/even pages + margin

situation I'm using the memoir class, two-sided. I left place for margin notes. Thus the text block is not at the center of my "sheet of paper" and this non-central position is different for odd and ...
4
votes
1answer
116 views

wrong twoside margin

I am using the twoside margin in a book classes but I have inverse margins. On odd pages left margin is wider than the right one and viceversa on even pages. It is a subclasses, I attached it below, ...
3
votes
2answers
440 views

How to create different margins for odd and even pages?

I'm trying to create a document that has different margins on even and odd pages. This is what I've tried: \documentclass[a4paper,12pt]{article} \usepackage[slovene]{babel} ...
4
votes
1answer
216 views

Margin vertical rule on outside margin of twosided memoir

So I have found this code which puts a rule inside the left margin. How can I get the code to switch to the outside margin on a two sided document? I can't locate the original post, as it was on ...
1
vote
1answer
303 views

Book style does wrong page shift

I'm writing my thesis in LaTeX and i'm using \documentclass[12pt,a4paper,twoside,openright,titlepage]{book} but I have a problem. I want, as in books, that the odd pages are shift to the right and ...
5
votes
0answers
110 views

Different margins for odd and even pages, but not mirrored with memoir [duplicate]

I need a help with this page layout: top/bottom margins: 2cm for all pages on even pages: 3.5cm - 2cm on odd pages: 2cm - 2cm I tried: \setlrmarginsandblock{3cm}{2cm}{*} ...
3
votes
1answer
135 views

Keeping consistent twoside margins across different pagenumbering styles

I'm writing a report which needs to be bound, and as such I'd like to use the twoside option. However, the first few pages of the report are causing some issues with the ordering. In the MWE below, ...
5
votes
1answer
446 views

Asymmetrical layout in two-sided document

I use two-sided document mode in Book class KOMA Script. It works well in the sense that the ToC, chapters, titles starts from the odd pages. Exactly we I need in a book. In a recent book I need to ...
0
votes
0answers
56 views

table of content, list of figures, list of tables in oneside in a twoside thesis [duplicate]

I am writing my thesis in twoside documentclass, but I want to put the table of contents, list of figures, list of tables and other frontmatter in oneside. I have been searching the google for many ...
39
votes
1answer
712 views

different type areas on even/odd pages

in some (very rare) cases, it might be desirable to have the type area, particularly the text width, be different on even and odd pages. Let's say we're typesetting a textbook that's supposed to have ...
4
votes
1answer
2k views

Odd-even margin

I am writing a book and I need to set the odd/even margin on the binding side. \usepackage[top=2cm, bottom=2cm, left=1cm, right=1cm, headsep=14pt]{geometry} I need left = 2.1cm for odd pages and ...
5
votes
2answers
893 views

Why does the \marginpar not appear on the left page?

I am working on a book right now and the margin notes are not appearing on the left-side pages. I tried using mparhack but it made no difference. Is my geometry, fancy style or another package ...
0
votes
0answers
39 views

Weird whole page indented and my goto preamble [duplicate]

The first page of my documents, after the title page is indented, relative to the whole document, ... I can't figure out why. Below I pasted a copy of my preamble. And I a new user of TexWorks, so ...
3
votes
2answers
2k views

Set different margins for even and odd pages

I have a class file for my document where I have declared margins: \setlrmarginsandblock{3.5cm}{2.5cm}{*}% with the left one bigger. But I wanted odd pages to have a bigger left margin and even ...
3
votes
1answer
431 views

How to add binding space to memoir twoside

I'm using the LED template to MSc which uses memoir twoside. I need to print it and it requires extra margins for binding. How do I simply add the extra space on the spine side of the page? ...
1
vote
1answer
635 views

problems with different margins for odd/even pages and openright does not work

I have two problems. The inner and outer margins on odd pages are different from those on even pages. On even pages the inner margin is a lot bigger. Desired outcome: bigger inner margin on odd ...
3
votes
1answer
459 views

Change behavior of geometry for all pages

I'm using the llncs document class and wanted to change the margin of all pages, using the geometry package. I use the following command: ...
11
votes
1answer
1k views

Why are odd pages left pages?

I'm typesetting a friend's novel using LaTeX (in my actual document I'm using memoir, but the same happens if I just use book). It's possible I'm going crazy, but I'm sure that it's setting up odd ...
1
vote
1answer
237 views

geometry options problem

I am using geometry package with \LoadClass[twocolumn]{article}. But when I use geometry, the options for left,right,top,bottom are effecting only in even pages not in odd pages. How can i change ...
3
votes
1answer
108 views

page layout problem

I have a knotty (at least for me) problem to solve. I do apologize, I'm a beginner. I'm trying to find a solution to misalignment. My document is as follows: page 1 xxxxxxxxxxxx xxxxxxxxxxxx ...
12
votes
2answers
979 views

How to create twoside book with oneside margin?

I want to make a twoside book with oneside margin such: odd pages: even pages: full header, with margin figure(or table): I used tufte-book class, but cannot set margins as i need. It's margins ...
4
votes
2answers
450 views

Does \documentclass{book} by default take care of gutter for inner side of page?

I'm hoping to create a book at the site lulu using LaTeX instead of Microsoft Word, and they say: Leave at least .5" margins on all your pages. Most books will require a gutter of .2" to .3". I ...
4
votes
1answer
496 views

Shift Odd Page in Duplex Print

This is more a printer problem, but I have no way to solve it on the printer side. When printing a two sided document, the sides do not match vertically. That means for example the line of ...
3
votes
1answer
456 views

Centering the frontpage using memoir

I'm using memoir (two-side layout). I have the problem that my front page is centered with respect to the margins, which are not equal in left and right side. \begin{center} will not solve this, since ...
1
vote
1answer
3k views

\evensidemargin & \oddsidemargin geometry package

how can I put this length with the geometry package? \setlength{\evensidemargin}{92.58438pt}% \setlength{\oddsidemargin}{24.38356pt}%
2
votes
1answer
571 views

Page layout for two-sided document

In the minimal example pasted below I would like to have: left margin on even pages = 1.5cm right margin on odd pages = 1.5cm (understood as absolute values, not added to/substracted from default ...
3
votes
2answers
769 views

Geometry Package - Layoutoffset: Distinction Between Odd and Even Pages Possible?

Currently I'm preparing a book for publishing. My printer wants a non-circumferential bleed around the pages, 0.125" at the top, bottom and outer side, but no bleed at the inner side. As far as I have ...
8
votes
2answers
4k views

Centered title page in twoside report

I'm writing my thesis using a twoside report. However, when it comes to the title page I think I want to have it centered i.e. the left margin and the right margin to be equal. How can I achieve this ...
2
votes
1answer
188 views

How to give different margin sizes for verso and recto pages in ConTeXt?

I am creating a simple page layout for a book, which should have 1 cm margins along the top, bottom, and edge, but leave 3 cm in the middle margin, where the pages will be glued together. ...
2
votes
1answer
424 views

Problem when imitating one-sided printing with double-sided printing in Memoir Class

I use memoir class and I imitate one-sided printing with double-sided printing thanks to the command (find in the memoir manual) \setlength{\evensidemargin}{\oddsidemargin} The problem is that I ...
5
votes
2answers
246 views

Make all pages odd

I have a memoir document, with custom settings for margins, headers and footers, etc. I just found out it is being printed single-sided instead of double-sided, and I was wondering if there is a ...