1
vote
1answer
46 views

How to use margins to center a table

I want to realize something like in this two pictures. I want to use a part of the margins for notes (draw even tables!). I want that the margin change from odd page to even page (I think it's simple ...
2
votes
1answer
39 views

How set a table in margin?

\documentclass[12pt]{book}‎‎ \usepackage[top=3.cm,bottom=3cm,left=2.2cm,right=6.2‎cm,marginparwidth=4.5‎cm‎,headsep=10pt,a4paper]{geometry} ‎\usepackage{amsmath,amsfonts,amssymb,amsthm}‎‎ ...
3
votes
1answer
116 views

Easiest way to write Avery 11137 template

Trying to get a template to work for the Avery 11137 label template and it is exceedingly harder than one would think because the geniuses over at Avery put it on an 8.5x7 page and, although it is not ...
0
votes
1answer
39 views

The text in a tabular environement goes out of margins [duplicate]

I need to write a long paragraph in my table, but the text goes out of the margins.. Here is my code: \begin{tabular}{l l} \textbf{P1.1} & ...
2
votes
1answer
107 views

Header and footer with tables. Right margin go off the page

I'm not completely sure if this topci is repeated, but anyway... I'm writing some company reports that have a special header and footer layout containing tables. I have been able to configure the ...
2
votes
2answers
230 views

Tables extending into the right/outer margin

I have some wide tables (might be figures, too) that don’t fit into \textwidth. If the draft document option is active, there’s a black border on the right indicating that it’s wider than allowed. ...
3
votes
1answer
84 views

Stop table going off page (vertically)

Much like this question, I want to force a table to fit within the vertical page margins. Any ideas? Edit: Margin size: \usepackage[left=3cm,right=3cm,textheight=23.5cm]{geometry} Present ...
7
votes
2answers
143 views

More aesthetically wrap text in a table?

I have a table that I must fit in one page but have difficulty doing so in any aesthetically pleasing manner. A MWE is pasted below. Are there any suggestions to improve this? Regretfully I haven't ...
1
vote
0answers
34 views

Margins- table how do i put the table inside the margins

This is my code, i don't know how to write a tabel on my own yet, so i used an online maker to do this, how do i make sure that the table won't go over my textwidth? \begin{table}[h] ...
6
votes
1answer
205 views

Rows exceeding margin in tabulary environment

The main issue I am having is that the second column becomes squished and the table exceeds the 1 inch margin that exists. What's the best to fix the issue? I also need the table to have the table be ...
2
votes
2answers
103 views

Table way out of margin

I have a really long table and it is out of margin. I read other post about this issue but I still cannot figure it out: \begin{table}[htbp] \begin{center} ...
2
votes
1answer
6k views

Making table width fit into text width [duplicate]

I'm using p{} format to adjust the width of a table. I expected using {p{0.1\textwidth}||p{0.2\textwidth}|p{0.2\textwidth}|p{0.2\textwidth}|p{0.2\textwidth}} makes the table width smaller than the ...
5
votes
2answers
193 views

Specification of the Layout for Q-A Reference Cards (Flashcards, Visual Cards)

I'm relatively new to LaTeX and I've used Microsoft Word so far for virtually all work with documents. For college, to use own question-and-answer reference cards, I decided once to split a portrait ...
8
votes
5answers
402 views

Fixed Sized Grids

I'm trying to create a latex document that is split up into grids that will match up with the dimensions of perforated paper. The dimension of each block is height: 38mm and width: 70mm. This should ...
0
votes
1answer
64 views

problem with longtable in landscape orientation in a twocolumn mode document

I have some trouble formatting a long table in landscape orientation using a predefined document class (provided by a journal editor): - the standard page size is shrunk: the height of the page (width ...
2
votes
1answer
118 views

Table going past margins

I'm trying to create a header for my resume. I'm almost happy with the result, but there's a small formatting issue. I'm using a table to control where my name and contact info are placed. My name ...
2
votes
2answers
159 views

Add vertical line margin-aligned from a given point through subsequent pages

Using the memoir package, I would like to have a vertical line on my margin like this: Some leading content ... vertical space ... ---------------------------------- XYZ | Content A | ...
3
votes
1answer
336 views

Top-aligned table cells with different font sizes and controlled spacing

I am trying to achieve a table where a few things have to work simultaneously. Several of these things have been discussed before, but I have been unable to make everything work at once (and some ...
0
votes
2answers
171 views

Linebreak in table cell at document margin

In order to allow line breaks within a table cell, I use \parbox. But when the cells I want to have line breaks in are in the last column of the table, the best thing would be to break them at the ...
1
vote
1answer
166 views

How to fix a table that is too wide for margins?

I have created a table that is too wide for the margins. What I tried to do was implement \hspace*{-50pt} before \begin{tabular} and \hspace{-50pt} after \end{tabluar}. Which gets rid of the overfull ...
4
votes
1answer
176 views

Tabular: messed up margins

Why isn't the table adjusting the text to make line breaks when necessary? Can I make them manually? What could be done to fix these margins? Edit: MWE below: ...
2
votes
2answers
508 views

Table out of margin

I created this table using siunitx package since values must to be represented in scientific notation. Unfortunately the table goes out of margin. How can I fix the issue? ...
3
votes
1answer
2k views

changing margins for a page with tables

I have a document with a table that is rather large. I have already decreased the size of the font but it still bleeds into the right margin. I would like to decrease the margins on that page so it ...
2
votes
1answer
248 views

Automatically change the text width for all table environments using memoir

I'd like to redefine the table environment in a document I'm writing so that the tables and captions are wider than the text block. I'm using the memoir class, and an example given in the manual is ...
1
vote
2answers
2k views

Fit table a bit outside of text margins

Following my post here, how could I use the command: \resizebox{\linewidth}{!}{...} to place a table a bit outside of the text margins? EDIT: At the moment this works fine for me. My only problem ...
5
votes
2answers
486 views

Set Table height to fixed height

I found the \resizebox command but I don't want to scale my table. I want to be able to set it to X height and have it stay there. Is there a way to set the height of a table and leave it there no ...
2
votes
1answer
78 views

Subtract height from column

The following latex example is kicking the third table down to the second page. But I don't need it on the second page, I need it all on the first and currently it's set at 3.5in but I really need it ...
5
votes
1answer
2k views

Remove top and bottom margin in tabular (around lists)

If I create a table with several (short) lists, currently I'm using a table construction with enumitem to (almost) remove the left margin. Now I still have a rather large margin at the top and the ...
0
votes
0answers
90 views

latex tabular width the same as the textwidth [duplicate]

Possible Duplicate: How to force a table into page width? I am generating some table as follow: \begin{tabular}[l]{|l|l|l|} \hline Input & Output& Action return \\ \hline \hline ...
4
votes
1answer
600 views

Table Spanning the Textwidth

I am trying to create a very simple, one row table that spans the linewidth. When I use the following command: \begin{tabular*}{\linewidth}{l@{\extracolsep{\fill}}r} Entry 1 & Entry 2 ...
2
votes
2answers
776 views

excel2latex table: output out of page

I generated the following code for a table using excel2latex add-in. However in the PDF output the table is ugly and morely cut halfway and moves to the right. Please suggest a solution. % Table ...
3
votes
1answer
730 views

Using tabularx package with xtable package in R

I am trying to solve the problem of having a latex table (produced using the xtable from R, then combined into a tex file using Sweave), exceeding the margins of my LaTeX document. I found that one ...
6
votes
3answers
4k views

Dealing with a wide table that exceeds the document margins

I am looking for "global" and "local" solutions to the case where I have a table that goes "much" beyond the right and left margins of the page (meaning: cases where having no margins to the page ...
4
votes
1answer
9k views

argument in \begin{subtable}

I use \begin{subtable}{.5\textwidth}...\end{subtable} to produce two (or more) subtables side by side (from the subcaption package). But I don't understand what {.5\textwidth} means. I tried different ...
2
votes
1answer
980 views

Overriding margins with longtables

I am trying to create a large table, it is both wide and has a lot of rows. I've gotten long table to work and break it up, and I've managed to turn it landscape. However, due to the size of the ...
2
votes
2answers
749 views

Tabular content spilling over right column margin

Tabular content spilling over right column margin. What's going on here? How can I fix it? \documentclass[a4paper,12pt]{article} \author{Peter Cao} \date{} ...
3
votes
1answer
361 views

paper edition of my university facebook

I'm trying to make the paper edition of the face-book of my university. I got some constraints; for example, I have to do very small margins. \documentclass[a5paper,twoside]{book} ...
42
votes
3answers
68k views

How to force a table into page width?

I have the following table: \begin{table}[htb] \begin{tikzpicture} \node (table) [inner sep=0pt] { \begin{tabular}{ l | l } {\bf Symptom} & {\bf Metric} \\ \hline Class that has many accessor ...
9
votes
2answers
4k views

How to make a landscape table fill the whole width?

It seems that neither \textwidth nor \textheight can force the table to fill the whole width. \documentclass[dvips]{book} \usepackage[a4paper,margin=20mm,showframe]{geometry} \usepackage{lscape} ...