about how to use the Adobe Minion (Pro) font with LaTeX

learn more… | top users | synonyms

0
votes
0answers
47 views

Tex uses much memory due MinionPro package [Solved]

I'm starting using MinionPro package. I follow the steps for install it package from https://www.ctan.org/tex-archive/fonts/minionpro/ ... I have no problems with installation. Here is my .tex file ...
2
votes
1answer
68 views

Switch between sans and sans-serif math with MyriadPro and MinionPro

I have a document using MinionPro as serif and MyriadPro as sans-serif font families. Math is set by default with the serif font but for captions I like to switch to the sans-serif font. A minimal ...
0
votes
1answer
72 views

MinionPro: Tabular Figures in Tables and Proportional Figures in text

I am using TexMaker and MinionPro and I would like to keep proportional both in figures and in the rest of the document. For figures, I use this configuration: \documentclass[english]{article} ...
9
votes
1answer
204 views

General guide on how to set up Minion Pro for math in lualatex

Minion Pro is one of the most beautiful fonts and comes with many Adobe products. A complementary set of symbols is provided by the MnSymbol fonts and package, which is not fully compatible to ...
5
votes
1answer
231 views

How do I make en/em dashes work in Myriad when using it with MinionPro

I'm using MinionPro for the body of a document and Myriad for figure/table captions. Because I can't load packages MinionPro and Myriad at the same time, I load the Myriad fonts for the sans-serif ...
3
votes
0answers
163 views

Minion Math with LuaLaTeX

I cannot get the font Minion Math to display correctly in LuaLaTeX. Several posts on here and the official font support page all say to use the package unicode-math. And so I try: ...
34
votes
1answer
3k views

Why does it take LuaLaTeX so long to load fonts and can I speed it up?

To test Mico's upcoming selnolig package, I tried out LuaLaTeX. While the overall experience for me as a pdfLaTeX end-user was very similar, I noticed that LuaLaTeX takes a long time to load fonts. ...
5
votes
1answer
100 views

Math comma issue with babel and MinionPro/MinionMath: typeset as an inverted E

The following code typesets an inverted E instead of the math comma on my system (texlive 2014, OSX) \documentclass{book} \usepackage[T1]{fontenc} \usepackage[onlytext]{MinionPro} ...
3
votes
1answer
187 views

Can or will pdf with MinionPro produced by ps2pdf allow to search for words with ligatures, such as “final”?

This is either a question or an encouragement, depending on the situation. If a pdf typeset with latex and made into a pdf with ps2pdf contains the word "final", searching for that word in the pdf ...
4
votes
1answer
136 views

Using MinionPro Tabular Figures in Tables and Proportional Figures in text

I am trying to use MinionPro tabular figures in tables because they look much better than proportional figures. However, I would like to keep proportional figures in text. This is the configuration ...
19
votes
1answer
474 views

Can one change the (ugly) MinionPro apostrophe kerning value with a macro?

If we compare these three text lines Linné's naming scheme. {Linné'}s naming scheme. {{Linné}'}s naming scheme. typeset them in MinionPro, and look at the final pdf we note that only the last ...
13
votes
1answer
179 views

Disabling ligatures also disables kerning

I am using Adobe Minion Pro (mostly because of its maths support), but I don't want to use the 'Th' ligature. This decision is based on guidance from Bringhurst's Elements of Typographic Style. I ...
11
votes
1answer
248 views

MinionPro, microtype and \j - Is there a way to get rid of a strange warning?

When I typeset my free physics textbook, I get a microtype warning Unknown slot number of character `\j' (It happens only for this character, no other one.) I get this message since many years, ...
5
votes
1answer
222 views

How does one get the MinionPro \qoppa?

Since I have switched to the 2014 texlive, one issue is not working: the character \qoppa. The command is defined in polutonikogreek in babel. It is an archaic greek letter, but was used also in ...
6
votes
1answer
207 views

Cronos Pro: missing opticals?

I am experimenting with the use of alternate fonts with LaTeX using pdfTeX (no XeTeX nor LuaTeX). I have installed FontPro with Adobe Reader's Minion & Myriad Pro, plus some Cronos Pro files I ...
0
votes
1answer
109 views

MnSymbol doesn't change the default math font

I'm working with MiKTeX 2.9. I've installed the package and I get no error whatsoever, but I keep getting Computer Modern words and numbers instead. Note that I didn't install the minionpro package. ...
5
votes
3answers
741 views

MinionPro semibold/medium

After a day of struggle I managed to install the full family of MinionPro font on LaTeX. After an hour of googling I cannot figure out how to use the medium (semibold) font. Ideally I would have ...
0
votes
0answers
179 views

Letterspaced small caps (ssc) for Minion Pro OpenType with XeLaTeX

I've installed both the Type 1 and the OpenType versions of the Minion Pro font on my TeX Live 2014 (the former through the FontPro scripts), and the TeX programs are able to properly use them. The ...
0
votes
1answer
275 views

Myriad Pro : Font shape `OT1/MyriadPro-OsF/m/n' undefined

I am trying to install MyriadPro on my MiKTeX 2.9 (32bit). Sadly, something, somewhere seems to have gone wrong. I allready installed MinionPro on my TeX Distribution and basically I proceeded the ...
3
votes
1answer
724 views

MinionPro conflicting with amssymb

I am using the package MinionPro. But I need some symbols, for example, \gnapprox and \mho, available on the package amssymb. Well, here is my code (as minimal as possible): \documentclass{report} ...
4
votes
2answers
616 views

How to install Myriad Pro on Windows 7 with TeX Live 2013?

I was trying to install Myriad Pro into my TeX Live 2013 and it comes up with this error: !pdfTeX error: pdflatex.exe (file pmyb8a.pfb): cannot open Type 1 font file for reading Since there are ...
14
votes
4answers
2k views

Minion Pro and Monospace Font

This is more a typography question than a TeX one, but can anyone recommend me a good monospaced font that blends well with Minion Pro?
2
votes
0answers
215 views

Small caps font is not enabled with fontspec and MinionPro

I can't make lualatex generate small caps font when I use MinionPro as my main font: \documentclass[a4paper,justified,nobib,notoc]{tufte-book} \usepackage{fontspec} \title{ABC} \author{Arthur ...
9
votes
1answer
211 views

MinionPro: spacing between f followed by quotes

Is it just me, or is the spacing between the letter 'f' and the following quotation marks incredibly tight in MinionPro? I am already using the loosequotes option, but as far as I can tell, that only ...
3
votes
1answer
263 views

ArsClassica (ClassicThesis variant) and MinionPro issue

arsclassica provides minor modifications to the classicthesis package. Both provide checks in their .sty files for the minionprospacing passed to classicthesis. The problem is that pdflatex yields an ...
3
votes
1answer
492 views

Using MinionPro for math and ArnoPro for text

As the title says, I want to use ArnoPro as my main font for text while using MinionPro for all math (inline or display). What I did for ArnoPro was since I have Windows on my laptop as well as Linux ...
2
votes
1answer
167 views

MinionPro Font-bugs: Copy numbers in pdf with lf option does not work and small caps are not scaled correctly

I have experienced the following problem with the MinionPro font with pdflatex and would like to ask if someone has an idea how to solve them: If I use minionpro package with the "lf" options in ...
2
votes
0answers
115 views

MinionPro package conflicts with {esint} [closed]

I am using MinionPro font but it conflicts with esint package. The compiler always complains: LaTeX Error: Too many math alphabets used in version normal. Therefore I am forced to use the integral ...
0
votes
1answer
503 views

Minion Pro Symbols

I searched the site but I couldn't find an answer. I'm trying to use Minion Pro. Some symbols don't seem good to me. Can you explain how to change them? (Maybe into mathpazo or better one.) ...
4
votes
1answer
102 views

MinionPro and Searchability/Encoding

I'm using pdflatex with the MinionPro package. The PDF looks fine, but apparently some characters (specifically "W" and the "Th" ligature) are put in the PDF in a way that breaks searchability. For ...
3
votes
0answers
278 views

MinionPro package semibold / medium fonts

How can the medium and semibold weights of Adobe Minion Pro be accessed in pdfLaTeX with the MinionPro package? I am confused by the package documentation, which indicates initially that the ...
1
vote
0answers
45 views

MinionPro, siunitx and some character substitution: Bad mathchar (32768) [duplicate]

I've been using a solution that allows me to: Use proportional figures in text and tabular figures in tables; Force siunitx to set "symbols", e.g. ( ) - in the text-font instead of the math-font, ...
16
votes
3answers
853 views

Possible to use MnSymbol with LuaTex?

I want to use the Minion Pro font together with math symbols from MnSymbol (http://www.ctan.org/tex-archive/fonts/mnsymbol). Is this possible? It has already been discussed here -> ...
5
votes
1answer
803 views

MinionPro font with some symbols from kpfonts

At this moment I'm using MinionPro package. But I don't like most of the MnSymbol's symbols. I discovered that I really like some symbols from kpfonts (if anyone suggest anything better, I will be ...
0
votes
1answer
175 views

Vertical Alignment of Digits with MinionPro

First of all, thanks for your great help and support - I have been able to find answers to pretty much all my latex questions on here. For this one, however, I could not find a solution. I am ...
1
vote
0answers
324 views

Can't compile text file because of metafont?

i have a complex thesis template, which i can't seem to compile. This is the output of pdftex : (/usr/local/texlive/2013/texmf-dist/tex/latex/oberdiek/grfext.sty) ...
9
votes
1answer
551 views

MinionPro, including math, in ConTeXt

A rather simple question, which probably will have a complex answer. I'm trying to migrate to ConTeXt, since I want to have a layout not easily achieved with LaTeX (grid...). In LaTeX, MinionPro is ...
1
vote
0answers
275 views

Install FontPro (Minion & Myriad) with a different bash than Cygwin

On my Windows computer, I don't want to install Cygwin. However, the Git client for windows and the MinGW compiler both came with a custom bash solution (MSYS & Git Bash respectively. Actually Git ...
2
votes
0answers
358 views

How to add new fonts to MacTeX 2013

I know how to install the three adobe fonts: MinionPro, MyriadPro and MnSymbol in a Mac (OS 10.6, 10.7, 10.8 and 10.9) where MacTeX 2010 is already installed. This can be done following the steps: ...
14
votes
3answers
2k views

Minion Math with unicode-math

This is a little bit off topic as it is not exactly related to TeX. I saw recently that Minion Math was updated to 1.020 which comes with math table support. Does any one had a chance to play with ...
1
vote
1answer
157 views

minionint option not working correctly with MinionPro package set up via FontPro

The minion integral that is used upon specifying minionint as an option for MinionPro is not displaying correctly. I installed my minion pro font as suggested by the instructions in the FontPro github ...
2
votes
0answers
116 views

MinionPro on Windows 7 does not have \epsilon [duplicate]

I have installed MinionPro fonts under Windows 7 using Miktex 2.9 by following the steps in the instruction you can read online on Scribd (mpro_installation_miktex_windows_machine.pdf) and load down ...
4
votes
2answers
2k views

Installing MinionPro in TeX Live 2011

I am having great difficulty to install the font MinionPro in TeX Live 2011. I followed all the steps in the README file on CTAN, but I get the following error when compiling the text: Process ...
2
votes
1answer
337 views

Substitute \mathbb fonts in Minion Pro with Blackboard Bold from Lucida Bright fonts

I would like to substitute Blackboard Bold fonts from Lucia Bright (that I have installed on my systems) in documents using Minion Pro. If I simply use Minion Pro style, I get the \mathbb fonts from ...
5
votes
3answers
2k views

Installing Minion Pro on Windows

I have been searching on the Internet but so far there is no guide that works for me. I tried the one from CTAN, but there I have to run commands, and install the LCDF Typetools (which aren't ...
1
vote
0answers
198 views

Math environment Minion Pro

I am using minion pro for my report and could like to change the math symbols in text environment.Currently the math symbols in text (section no, subsection no, figure no) appears as marked black in ...
2
votes
1answer
407 views

Myriad Pro: Chapter number style of the toc with pdfLaTex

I use the MinioPro and MyriadPro fonts in my document. To compile I use the pdfLaTex. I would like to change the format of the table of contents. I'm looking for an option to make the chapter ...
2
votes
0answers
129 views

Problem with polyglossia and MinionPro

I have a problem with small caps not showing correctly when loading polyglossia. I am trying to use polyglossia with classicthesis, which I know is unsupported, but the same problem appears when ...
7
votes
1answer
310 views

MinionPro opticals lining figures

I get warnings of the kind pdfTeX warning: /usr/bin/pdflatex (file /usr/local/share/texmf/fonts/type1/adob e/MinionPro/MinionPro-Capt.pfb): glyph `eight.fitted' undefined for all numerals and the ...
2
votes
0answers
76 views

LuaTeX: Strange symbol proportions when using Minion Pro for math [duplicate]

I'm writing my master's thesis in Minion Pro using LyX and I would like to use that font for math, too. For PDF output I use LuaTeX due to several nice features I got used to in the past (such as easy ...