{minipage} is an environment providing a paragraph box which is a complete mini version of a page.

learn more… | top users | synonyms

0
votes
1answer
21 views

Set minipage width to the available space

I am trying to fit 2 minipages next to each other, and I would like one to take 20% of the \textwidth, and the other one the rest of the space available, with a margin between both minipages that I ...
3
votes
2answers
62 views

Caption misalignment with minipage and adjustwidth

I'm trying to fit two over-sized figures side by side on one page. I tried using minipage and adjustwidth, but the caption on the second figure kept mis-aligning to the left, as shown below. I tried ...
1
vote
1answer
86 views

How to reduce the size of the equation

I wish to put two equations into one line using minipage, but they are too wide, any solution for reducing the size of the equation without removing words so that I can put into one line to reduce ...
1
vote
1answer
27 views

Adjusting figure and caption in rotated minipage on landscape

Already the title sounds complicated since I need to use the caption on the side of the rotated image in landscape mode. I tried some spacing as you see in lines commented with %, but it did not work ...
1
vote
1answer
79 views

How can I put a minipage that fits to the actual line width inside of a TikZ Node?

Question I would like to put a minipage environment inside of a tikz node. I know this is done already with the align=left command, but if you set a minimum width of the node to \linewidth, then the ...
3
votes
2answers
41 views

Aligning three columns differently; with images, manually broken and wrap-around text

I am trying to create a situation with three columns from left to right: one with an image top-edge aligned to the top of the center column and the left of itself; one with wrap-around text having ...
4
votes
2answers
39 views

Text boxes that go into the the margin in a two column article

I'd like to highlight some important quotes in my article by writing them into floating (invisible) boxes, that go half into the (left/right) margin and half into the respective column. I'd prefer a ...
1
vote
1answer
44 views

Table and TikZ object on two columns

I'm trying to have a table generated by the tabular environment and a plot generated by TikZ placed side by side. I tried using the table and minipage environment since it works for having multiple ...
5
votes
1answer
65 views

Putting algorithm in minipage

I have the following algorithm. Could any one please let me know how I can put it in a minipage? \begin{algorithm}\small {Start}\; \eIf{A is bigger than B}{ \eIf{if A is bigger than C}{ A; }{ ...
4
votes
1answer
3k views

Align the top of two tables horizontally (side-by-side with minipage)

I'm using \minipage to put two tables side by side. But when the two tables are not of equal length, the shorter of the two is vertically centered with respect to the other. I would like both tables ...
2
votes
1answer
108 views

minipage intelligent management

Is it possible to let LaTeX manage minipage placement similar to how LaTeX manages figures and tables to be placed? This question comes from my previous question. I could move the minipages around ...
4
votes
2answers
78 views

minipages: multi sized minipages that use all space on the paper and automatic scaling

I am creating a sheet with solutions to different qualifying questions. Each solution takes up a different length but I don't want to waste any white space. I want to put other minipages that will ...
1
vote
1answer
44 views

Malplaced minipage in fancy header

I have a rather complex layout for a letter. It needs to have a certain part of a header on every page while another part should only be shown on the first page. The whole thing can be found here: MWE ...
5
votes
2answers
126 views

two minipages next to each other: the right is shifted vertically

Hy,first post here. Hope I will do well. I have a problem with setting up two minipages next to each other. The right one is always shifted vertically downwards. Here is my example code: ...
2
votes
2answers
63 views

Using whole page with minipages

I'm preparing template for dynamic content. Content will be printent in blocks, as presented here: Page format a4, no margins. Special printer provided. There are 21 blocks. Each block size: 70mm x ...
12
votes
2answers
14k views

! LaTeX Error: Not in outer par mode

I am using an image within minipage and getting error message. ! LaTeX Error: Not in outer par mode. Below is minimal working example. \documentclass[11pt,table,a4paper]{article} ...
3
votes
1answer
64 views

How to align rotated column headings in a table?

I have this code which I adapted from Big table with rotated column labels using booktabs: \usepackage{booktabs} \begin{document} \begin{table*} \centering \begin{tabular}{cccccccccc} \toprule ...
4
votes
3answers
206 views

How do you make text flow to another part of a page?

I have a nasty paragraph with tables, long math and enums which I want to flow between two regions of my page. Here is an example of what I am trying to accomplish: I figured I could somehow do it ...
2
votes
1answer
38 views

miniframes problems with header

I am having issues with my minipages header -- the left most part that says "introduction" never changes. I would be happy even totally getting rid of, which I can't seem to do. ...
6
votes
2answers
112 views

vertical alignment of two columns in a beamer frame

I'm trying present two concepts side by side in a frame. And I want each lineitem to be vertically aligned. Here is is an example where they are not aligned. \begin{frame}{An Example of using columns ...
5
votes
1answer
55 views

Why the text goes a little up when comparing two minipages?

I am trying to add a second name in the supervisor list and when I do it the list goes a little up compared with the Authors name. How can I do it to be in the same height: block code for the first ...
4
votes
4answers
2k views

\fbox around type area

I'm trying to put a border around multiple lines. Here's a MWE with what I've achieved so far: \documentclass[a4paper]{scrartcl} \usepackage{calc} \begin{document} \setlength{\parindent}{0cm} text ...
2
votes
0answers
34 views

Why does minipage have different top/bottom margins for math environments? [duplicate]

My goal is to create a framed minipage environment that will contain text and math environments in varying combinations. I noticed that the top (and bottom) margin of the minipage is quite a bit ...
1
vote
1answer
37 views

Add figures to a minipage

I've been trying to add figures to a minipage in lyx but couldn't really find a way. Does someone know how this is done in lyx?
1
vote
0answers
41 views

Footnote in environment as parallel (2nd part)

I refer to this tread: Footnote in environment as parallel. If I build a little more complex environment to enlarge the text width in two columns quotation, there is a trouble with notes number. ...
2
votes
2answers
61 views

Center content of a minipage inside of a longtabu

How do you center the content of a minipage that is placed inside of a longtabu? My minipage looks like this and can be found online here: ...
3
votes
1answer
57 views

Floats lost error

I tried to combine this answer: http://tex.stackexchange.com/a/73983/4011 with minipage but got an error: ERROR: LaTeX Error: Float(s) lost. \documentclass{article} \usepackage{showframe}% ...
8
votes
2answers
3k views

How do I make one minipage the same size as another?

I'm writing a LaTeX document into which I want to put two boxes, in a row next to each other, which will contain varying length content. I want each box to be the same height, and that height needs ...
6
votes
1answer
3k views

How to control the vertical height of boxes

I would like to create boxes where I can control the height of the boxes. Right now I have used the command. \colorbox{calcclr}\makebox[\textwidth-2\fboxsep][l]{#1}}} This gives me a box that ...
3
votes
2answers
142 views

Using Tikz to position a background image in mini page

I'd like to use tikz to position a graphic at the lower right hand corner of a minipage. I've gotten this far (this isn't quite an MWE, since it depends on a locally available imagefile). ...
1
vote
0answers
39 views

Split page first vertically, then horizontal, and finally vertical again, for folding into eighths. Reflow?

I would like to make a letter sized document for folding into eighths for a pocket size pad to take notes and include references, for instance tasks for the day. I may use org-mode exporting ...
2
votes
1answer
40 views

How to change text arrangement on page

Currently I'm using pdflatex to print content on page with width of 6 in and height of 9 in. It's printing in standard print orientation as mentioned in the diagram below "Current Printing format". ...
1
vote
1answer
80 views

How to decrease horizontal and vertical space between figures?

I want to insert 24 figures each two of them side by side. I'm doing this through \minipage but I'm not satisfied with the result because although figures appear small but I can have just 4 of them in ...
1
vote
2answers
53 views

Footnotes in minipages without footnote separator and increased indent

How do I cancel the footnote separator line in minipages only? I would also like to increase the indent of footnotes in minipages only. This is handy after tables, for instance. Ideally, I would use ...
2
votes
0answers
27 views

Minipage inside MetaUML Activity Diagram

I want to use Minipage environment inside MetaUML Activity Diagrams. The following MWE will not compile (tried mpost and mptopdf). When using the next line instead of the minipage-line, compiling is ...
2
votes
0answers
163 views

How to do a small box synchronized translation? [closed]

I would like to do something similar to the Artscroll Bibles, with a Hebrew text and a small box on the top with a synchronized translation. In the following picture, the box in question is the upper ...
4
votes
2answers
114 views

How to achieve multicolumn item lists with independent content?

I need three item lists next to each other, with a centered heading for each list. Using the multicol-package doesn't seem to fit my needs as it doesn't allow me to fill my columns independently, does ...
2
votes
1answer
66 views

Beamer — Revealing image in one minipage moves stuff in the other minipage

I have two vertical minipages and when I reveal a picture in the right minipage, the text in the left one moves down a bit. I tried to use the columns environment, but I get the same result. I'm ...
3
votes
2answers
39 views

minipages in fbox horizontal misalignment when figure is included (not float)

I am trying to place some text and a figure next to each other and trying to avoid wrapfigure at the same time :-) Placing two minipages inside a framedbox works just fine: the text can be aligned by ...
4
votes
2answers
7k views

Set background color of a box with predefined width

I would like to have something like a minipage with colored background, i.e. a box where you can predefine the width and the background color. My attempt \colorbox{green}{\begin{minipage}{\slwidth} ...
6
votes
2answers
130 views

How to keep tikzpicture minipages in position?

I found these pretty boxes on texample.net: \documentclass{article} \usepackage{tikz} \usetikzlibrary{shapes,snakes} \usepackage{amsmath,amssymb} \begin{document} % % Define box and box title style ...
5
votes
1answer
68 views

consistent spacing using tabular/ minipage/ parbox

Even though I've read numerous threads on how to achieve consistent spacing, I still cannot figure out, why it doesn't work when using any of the macros \testD to \testG in the following example. ...
5
votes
2answers
265 views

Three 'side to side' figures using minipage

I'm trying to set up a main figure containing three sub figures. The idea is to split them in such way that it shows a two columns figure where the second column is made out of two sub figures located ...
0
votes
0answers
66 views

Aligning minipages inside list environment

I use an own environment to typeset exercises with exercise-numbering at the left and exercise-body at the right. When I want to put two minipages in the exercise-body, they aren't aligned anymore ...
0
votes
0answers
106 views

Minipage inside long table

I have large table going more than one page . \documentclass[useAMS]{biom} \begin{table*} \centering \def\~{\hphantom{0}} \begin{minipage}{140mm} \caption{Models and Explicit Estimates} ...
1
vote
1answer
67 views

How to increase vertical spacing between minipage and text?

I was trying to include two equations side-by-side in a document, while retaining the labels following this answer. However the spacing between the minipage and the text is too small. How can I ...
4
votes
1answer
2k views

Underfull \hbox (badness 10000) message

I made a mini page like below. It compiled without any error, however, I am getting following message in log: Underfull \hbox (badness 10000) in paragraph at lines 104--109 I am trying to fix above ...
0
votes
1answer
47 views

Wrong placing of captions for minipages

I have problems placing subcaptions and captions for minipages. A picture depicts what I want, but a figure included in one graph. Maybe, the right solution wasn't \picture in a previous post. I hope ...
4
votes
2answers
165 views

top align minipage in tabular

I have one table with 2 minipages. I wish to top align the two minipages. e.g. \documentclass{standalone} \usepackage{adjustbox} \begin{document} \begin{tabular}{|l|l|} \hline ...
5
votes
3answers
133 views

Long list of tabular figures inside minipage goes off page

Using the follow MWE, I'm able to create a beautiful lists of photos on the left and a caption on the right (similarly, I could also use the sidecaption package or floats directly). MWE [LuaLaTeX]: ...