{minitoc} is a package that facilitates creating 'miniature' {table-of-contents} on a per-section, or per-chapter level.

learn more… | top users | synonyms

2
votes
1answer
26 views

Problems in using minitoc

My MWE, \documentclass[oneside,a4paper,12pt]{book} \usepackage{amsmath,amsthm,amssymb} \usepackage[usenames,dvipsnames]{xcolor} \usepackage{geometry} \usepackage{minitoc} \usepackage{lmodern} \...
1
vote
1answer
30 views

\marginpar start at top of page

I am trying to build a minitoc in a marginpar. It can span several pages. Everything is fine while there is no figures on the top of the page. I need the contents to start from the top of typing area ...
0
votes
0answers
21 views

minitoc does not work

I am trying to use the package minitoc but it does anything. This is the code: \documentclass[a4paper,11pt,twoside]{book} \pagestyle{plain} \usepackage{minitoc} %For the preamble Then: \begin{...
3
votes
1answer
23 views

How to use minitoc heading in cyrillic

I would like to use minitoc in my document which is in bulgarian. When I don't use language option for minitoc package everything is fine except mini table of contents heading which is in English. ...
2
votes
1answer
37 views

How do I update minitoc

I'm desperatly trying to update my minitocs I added in the beginning of every chapter. To do so, I've tried compiling several times, and I've tried to delete my "\minitoc and my \dominitoc in my code. ...
6
votes
2answers
247 views

Adding general introduction to table of contents as chapter causes a problem

I'm trying to add a general introduction to my report. Well I added it to the table of contents and without number. Using this code : \addcontentsline{toc}{chapter}{\protect\numberline{}Introduction ...
1
vote
1answer
104 views

minitoc problem

I 'm writing my phd using Thesis.cls But i have a problem with minitoc. The table of content of each chapter doesn't appear. This my MWE: \documentclass[11pt, oneside]{Thesis} \graphicspath{{...
4
votes
1answer
235 views

What are the .mlf, .mlt and .mtc files generated by pdflatex?

On a particular document pdflatex is generating a large number of files with the extensions .mlf, .mlt and .mtc, e.g document.mtc, document.mtc1, document.mtc2, and so on. These dozens of files are ...
5
votes
1answer
78 views

Removing/Renaming the title of minitoc

For minitoc package, the ToC title can be changed through the command \stctitle. However, for the following MWE, I found the same ToC title "Contents" without change. So, what is wrong or missing? \...
1
vote
1answer
45 views

how to show list of figures and list of tables inside chapters only and not also at top of document?

This is a follow up question from setting-tocdepth-to-zero-in-report-class-makes-minilot-and-minilof-not-show-up but I have new problem now and it is really a new question but related. I have a main ...
2
votes
1answer
52 views

setting tocdepth to zero in report class makes minilot and minilof not show up

I want my main TOC to only show chapters. Not sections and subsections. This is report class. So I added \setcounter{tocdepth}{0} which worked. But then I noticed something strange. minilof and ...
2
votes
0answers
50 views

PartToc looks bad (pagebreak etc.)

Wonderful Good Evening, I have one problem with the minitoc-Package, which I'm using for parttocs. I have one main-texFile with one titlepage and one overall-toc and after this, I'm importing ten ...
2
votes
1answer
93 views

Komascript chapter title position

I'm trying to format the Chapter title (I'm using Ubuntu which has komascript 3.12) using Tikz to add a minitoc. I can format the number and chapter prefix but the chapter title does not change ...
1
vote
0answers
34 views

Behaviour of section, subsection… in text and figures

I am using sections, subsection,... in my document. Sometimes, I need to have a certain format, such as 1, 1.1, or 1.a, 1.1.a or 1.1.1, and so on. Also, I have a chapter of figures. In this case, I ...
3
votes
1answer
44 views

Auto increase number width between minitoc chapter number and title

When the number of sections and subsections goes into the double digits the chapter number and title in the minitoc start to overlap: \documentclass{book} \usepackage{minitoc} \setcounter{chapter}{...
1
vote
1answer
113 views

Why sections in the minitoc are not bold?

Everything is in the question... \documentclass[a4paper,12pt,oneside]{book} % \usepackage[francais]{babel} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage{subfig} \usepackage{...
4
votes
1answer
429 views

Minitoc of wrong chapter

I'm writing my Thesis and I want the general table of contents at the beginning of the document and the toc for every chapter at beginning of every chapter. For doing so I use the minitoc package. If ...
3
votes
2answers
158 views

How can I put a minitoc before a chapter, on the facing page?

I'm writing a large book, using minitoc to put a small table of contents at the start of each chapter. But it looks terrible. I would like instead to put the minitoc on the facing page before the ...
1
vote
0answers
109 views

Format header and chapter title [closed]

I am writing some notes for myself and I modified a style file for it which is found over internet. I want to modify it further according to what I like but I am not able to do so. I am using ...
2
votes
1answer
368 views

! LaTeX Error: File `minitoc.sty' not found

I'm using Fedora 21 as OS and Texmaker to compile my tex files, recently I used minitoc package but I got always the same error ! ! LaTeX Error: File `minitoc.sty' not found. I tried to install the ...
3
votes
1answer
271 views

I want to change the font of my minitoc

I am changing the font in my preamble using \usepackage{avant} \renewcommand*\familydefault{\sfdefault} %% Only if the base font of the document is to be sans serif \usepackage[T1]{fontenc} but my ...
2
votes
1answer
202 views

Minitoc in Supplement - renewcommand causes problems?

I cannot get the minitoc package to create a mini table-of-contents for my Supplementary Material section. Note that I renewcommand a few things so that my Supplementary Material sections, tables, &...
1
vote
1answer
454 views

Changing the mini toc header title “Contents”

Follow-up to Incorrect Linking with minitoc and hyperref. MWE: \documentclass{article} %font \usepackage{mathpazo} \usepackage[english]{babel} %change TOC header \addto\captionsenglish{% Replace ...
1
vote
1answer
66 views

Incorrect Linking with minitoc and hyperref

MWE: \documentclass{article} %font \usepackage{mathpazo} \usepackage[english]{babel} %change TOC header \addto\captionsenglish{% Replace "english" with the language you use \renewcommand{\...
1
vote
1answer
67 views

Combine tocloft and minitoc to create custom lists in document sections

I created custom lists with tocloft and succesfully typeset them as a replacement for a toc (It is about music sheets with songs being grouped in groups of songs). I now would like to have a list of ...
1
vote
1answer
123 views

minitoc suppress before/after space

Is there any way to easily customize \minitoc to avoid the big before/after space? Without using \vspace{-5mm} everywhere I use them (which is in a lot of chapters), and, only as a last case recourse,...
4
votes
1answer
216 views

minitoc suppress title and rules

There are a few questions already about minitoc. But I could not find a way to suppress/disable the "Contents" title of the minitoc and the hrules... MWE: \documentclass{report} \usepackage{minitoc}...
3
votes
0answers
104 views

Extra page while using simultaneously minitoc and float [duplicate]

I have a problem for a while now: there is always an extra page at the end of my documents. I notice that this happens when I use simultaneously minitoc and float. I track this issue down to this ...
3
votes
2answers
190 views

Adjust vertical spacing between minitoc title and contents

I'm using minitoc and I want to adjust the vertical space between the title and the contents, shown in the image below: Here's my MWE: \documentclass{book} \usepackage{minitoc} \nomtcrule \...
2
votes
2answers
108 views

How to split the toc in two?

I want to split my thesis in two main parts: "Theory" and "Practice" in such a way that: 1) "Theory" and "Practice" appear as main bookmarks in the pdf; 2) the table of contests is splitted in two, ...
2
votes
1answer
73 views

How to define the scope of a minitoc ? How to add a line break in a toc?

I've got a problem with my tables of contents (both local and global...) I want to include a section line in my main toc that does not appear in the minitoc of the previous chapter. Also I would like ...
2
votes
1answer
390 views

Minitoc and unnumbered chapters

I am writing my thesis and I have the following problem with the minitoc. I would like my first chapter (the introduction) to be unnumbered. But when I use \chapter*{Introduction} all the ...
6
votes
1answer
844 views

Insert Table of Contents in chapter

Any idea of how to create a mini table of contents (TOC) in the beginning of a chapter? Not the ordinary TOC in the beginning of the report, but a mini TOC in the beginning of a chapter (like, ...
6
votes
1answer
1k views

Using memoir and minitoc

I am writing a little book with the memoir class and I would love to add little table of contents at the start of each chapter. I found that I could use the minitoc package, but it doesn't seem to ...
0
votes
1answer
171 views

Minitoc Package: Secttoc works just after changing section to part and back to section

I have no idea why, but if I use \secttoc it works only for the section if I change the section to "part", compile it, and change it back to "section" \documentclass[12pt,a4paper,titlepage]{article} \...
1
vote
1answer
126 views

How to show starred subsections in minitoc and not in toc

I've the main.tex and chapter1.tex, chapter2.tex, ... For each chapter I have a minitoc. In principal toc I want to show chapters and sections (have I to star the subsection, right?). In each minitoc ...
1
vote
1answer
172 views

minitoc for each section in documentclass book

I want to get minitoc for each section. My following code provides the minitoc for the whole chapter but I need minitoc for only sections. Any help will be highly appreciated. Thanks % Document Class ...
49
votes
2answers
30k views

Adding unnumbered sections to TOC

I have many unnumbered sections in my report (more than 100), all created with: \section*{section name} I want to find a way to easily add them all to the TOC (specifically to a minitoc). Since I ...
2
votes
1answer
726 views

Specify minitoc for each chapter

To specify the toc depth of each chapter I can do \chapter{Title} \addtocontents{toc}{\protect\setcounter{tocdepth}{1}} ... \chapter{Title} \addtocontents{toc}{\protect\setcounter{tocdepth}{2}} ... ...
2
votes
1answer
243 views

minitoc Errors (potential clashes with other packages?)

I want to insert chapter content for my thesis by using minitoc package. It seems working on its own. However, if I add other packages for other purposes, then it does not work and I keep getting the ...
14
votes
2answers
999 views

How to make a local TOC that only shows levels below where it is inserted?

I simply want to make a local Table of Contents (TOC) which shows in its content what is below the level the TOC is inserted in and not outside. For example, if I do \minitoc inside \section{}, the ...
1
vote
1answer
525 views

Minitoc conflict creating aux error defcounter refsection

While compiling my book, I encountered the following error: (./Book.aux ./Book.aux:94: Undefined control sequence. l.94 ...\defcounter {refsection}{0}\relax }\@write The thing is that a simple ...
1
vote
1answer
74 views

Minitoc top align

When I apply minitoc and the table of contents spill over to the next page, it automatically fills the entire page instead of being aligned to the top. \documentclass[12pt]{book} \...
4
votes
0answers
298 views

Table of contents in a separate file with correct hyperlinks to many files

It's my first question here. Sorry if it doesn't follow the rules. I have: I'm writing a manual in the book class with pdflatex (MiKTeX under Linux). Each chapter is stored in a separate tex-file (...
2
votes
1answer
228 views

Problem with tocloft, minitoc and bold math mode

To ensure equations in headings are written bold as well I have added the following command to my document: \makeatletter \g@addto@macro\bfseries{\boldmath} \makeatother This works very well until ...
3
votes
1answer
105 views

How to remove page numbers in a short toc, but not from the long toc?

I would like to have a short toc with no page numbers at the beginning of my document, but a long toc with page numbers at the end. My example : \documentclass[french,a4paper,12pt,twoside]{report} \...
0
votes
0answers
192 views

Minitoc and import: how to specify location of mtc file?

In the project im working in, the structure is as follows . ├── a │   └── main.tex ├── b │ └── main.tex ├── main.tex The root main file is \documentclass{book} \usepackage[utf8]{inputenc} \...
2
votes
1answer
117 views

Unravel the \writecontentsline mystery

Trying to program a macro that is similar to \adcontentsline: Applying \immediate\write to, say , \frameEntry{\insertframenumber}{\inserframetitle \}{\thepage} records the wrong page number. ...
2
votes
1answer
144 views

Help in hooking into the \begin{frame} environment in beamer article mode, so as to produce a list of frames per subsection

I am in the course of composing a long beamer document, which should serve both as slides for class presentation and as a mini-textbook. My document includes about 600 slides, which are partitioned to ...
6
votes
1answer
97 views

Workaround mysterious bug, involving minitoc, twocolumns, and abstract

In the following MWE, the mini table of contents of Section 1, comes out to be of Section 2, while Section 2 is missing its mini table of contents. The combination of two components creates the ...