The multibib package allows to create references to multiple bibliographies within one document. It thus provides a complementary functionality to packages like bibunits or chapterbib, which allow to create one bibliography for multiple, but different parts of the document.

learn more… | top users | synonyms

1
vote
0answers
20 views

One of my 2 bibliographies will not show up when I typeset [duplicate]

So I am editing a paper that I did not write and the paper uses 2 bibliographies, one for references and one for links and I have 2 .bib's named Links and References This is my minimal code, ...
4
votes
1answer
76 views

list of publications, grouped and ordered

In my thesis (based on the classicthesis package) I'd like to create a page with a list of my own publications. I want to be able to group them under different headings ("Conference Publications", ...
2
votes
1answer
115 views

How to use multibib in order to insert a second bibliography as a part of an annex?

I’m currently using apacite for my thesis and I would like to use multibib in order to have two separate bibliographies. How can I do that ? This a MWE : ...
1
vote
0answers
14 views

Separated references sections for appendix [duplicate]

The references in my document have the following requirements: My references need to appear before my appendices. My appendices contain new references. These references should not appear in the ...
3
votes
1answer
69 views

Defining an environment which includes a bibliography

Consider an environment which is intended to house a variety of content related to an author. Content may include name, affiliation, a paragraph which is a short biography, as well as, a series of ...
1
vote
0answers
40 views

Two separate bibliographies at the end of an article

I would like to write a review article that contains two list of references. One list would be the one from resulted review articles. The second one would be all other articles. I am using TeXworks. ...
0
votes
0answers
40 views

Multibib and Natbib issue workaround with renewcommand?

I divided my bibliography into 2 parts: Literature and online sources in this manner: \usepackage[table,xcdraw]{xcolor} \usepackage[square, numbers, comma, sort&compress]{natbib} % Use the ...
1
vote
0answers
31 views

I need two separate bibliographies at the end of my document

I'd like to write a report which cites some of my own publications and also publications from others; and I would like to separate the lists at the end of the report. I used multibib in the past, but ...
3
votes
0answers
60 views

Bibliography with multibib problem

For my thesis I'm working with the polyglossia package and now I need to include my bibliography. I'd like to work with multibib, to seperate primary and secondary sources but I can't seem to make it ...
1
vote
0answers
97 views

Different citation styles for multiple bibliography

I've a document with multiple bibliography and I'm desperately trying to have different styles for \cite options. I'd like an author-year style for bibliography, while a numeric style is better for ...
2
votes
0answers
75 views

multibib: wrong label?

I would like to produce a document with two lists of references. One should have numbered items, another should have "E" prepended to the number. Here is my solution that does not work ...
0
votes
0answers
49 views

\usepackage{multibib} resumes enumerate numbering

please help me with the following minimal example. Why does the numbering of enumerate resume, and how to get standard behaviour? \documentclass{article} \usepackage{multibib} ...
0
votes
0answers
41 views

bibliography for two separate parts

I want to generate two separate bibliography for both main and supplement. Originally I am using Biblatex and just put \bibliography{mybib} in the end of one session. However if I put this at the ...
1
vote
1answer
66 views

Problems with formatting of reference list using multibib

I'm using the multibib package to distinguish different types of references. In my document I have about 50 references in the first and about 70 in the second reference list. The numbering of the ...
1
vote
1answer
277 views

My multi bibliography appears empty (using multibib package)

My bibliography (actually 4 different ones) is empty. If I try only one, with normal bibtex, it works. I have read the multibib package manual pdf file. I have read the thread currvita, multibib ...
1
vote
1answer
116 views

Combine different types of cite commands using packages cite and multibib (Update April 28th)

I'm using the multibib package to differentiate between different types of references. Additionally to \cite{} I've defined the command \citemine{}. Citing works perfectly fine, but sometimes I'd ...
1
vote
0answers
193 views

How to modify bibliography sorting with multibib?

I'm using multibib to generate a list of publications for my cv (using moderncv). The problem is that the entries are sorted alphabetically, whereas I'd like them to be sorted by year, with the newest ...
2
votes
1answer
318 views

bibtex error: Not writing to book.blg (openout_any = p), MacTeX-2014

I am using a Mac, OS X 10.10.1, TeXLive, all packages up-to-date. MacTeX-2014 Distribution. The document is based on the moderncv package and uses multibib. I can run LaTeX on the file, and it ...
3
votes
0answers
56 views

Different citation styles for different bibliographies in multibib

I have a document with two bibliographies using bibtex and multibib. Like so: \usepackage[resetlabels,labeled]{multibib} \newcites{A}{Other References} I use the usual \cite command for the other ...
3
votes
1answer
152 views

How to get references at the end of each chapter?

I want to get references at the end of each chapter. references are in bib files. Please help me. I also want to write the title of each chapter. \documentclass[twoside]{book} ...
5
votes
1answer
550 views

Resetting bibliography numbering using multibib and moderncv

I have two files, art1.bib: @article{article1, title={Journal Article}, author={Man}, year={2014}, journal={Journal} } and conf1.bib: @article{magazine1, title={Magazine Article}, ...
2
votes
1answer
205 views

Latex cannot find the bibliography items, why?

I have been trying to make multibib work for several hours, but it does not read or print the bibliography entries. What may be going wrong here? Should it be executed on the commmand line separately, ...
1
vote
1answer
94 views

How to remove unwanted asterisk that appears in margin when multibib is used with custom Section command?

Background - I'm modifying a fairly well documented LaTex CV to build my own. All works well, till I tried to add publications using the multibib package (using this answer in Tex.SE). When I ...
1
vote
0answers
61 views

Using three different reference lists in one document with different citation styles

I try to include three different reference lists into one article, all using different citation styles, like e.g. in this mini layout example: \documentclass{article} \begin{document} We have ...
6
votes
2answers
180 views

Problem in combining hyperref with multibib

I am writing my thesis and the document (in book class) contains multiple lists of references, one per chapter. Thus, I am using multibib package and the command \newcites to group the citations in ...
1
vote
0answers
46 views

Multibib in TeXclipse

I am using TeXlipse 1.5.0 on miktex 2.9 on Windows 7, and I try to use the package multibib to create multiple bibliographies. I however can't seem to get TeXlipse to run bibtex on multiple ...
2
votes
2answers
503 views

Suppress warning from natbib/multibib with silence

I fail to suppress the warning Package natbib Warning: Citation `Entry' multiply defined. using the silence package when using natbib and multibib. This is my MWE: % arara: pdflatex % arara: ...
2
votes
0answers
360 views

My own publications list without natbib and biblatex [closed]

I am writing my PhD thesis and I should add the list of my own publication. I am not using natbib nor biblatex. Because with natbib I can't use the alpha style and biblatex is incompatible with the ...
2
votes
0answers
233 views

Remove bibliography headings with multibib and tocbibind

I use multibib which creates two families of citation commands: pri and sec. I would like to get rid of bibliography headings for the \bibliographypri and \bibliographysec commands while keeping the ...
6
votes
1answer
736 views

How to configure TeXstudio editor for multibib?

I want to use multiple bibliographies for which I am using following code. However, I realize that I need to configure my text editor to properly process this code but I don't have any idea how. ...
5
votes
1answer
155 views

Enforce 2-digit citation numbers?

I need citation numbers to be at least two digits. So, any number less than 10 needs to be prefixed with a zero: [01], [02] ... [10] Is it possible to that in bibtex, or any other citation package? ...
4
votes
1answer
166 views

References pulled from the wrong bibliography with multibib

I have the following problem with multibib: when I use the LaTeX code \documentclass[a4paper,11pt,german,american]{article} \usepackage[resetlabels,labeled]{multibib} ...
2
votes
0answers
84 views

Full citation using multibib?

I am new to Latex and am using it for an academic paper. As I need several bibliographies, I am using multibib which is working great, but I need full citations of the bibliography entries to appear ...
2
votes
1answer
378 views

Biblatex equivalent to labeled multibib with working hyperref

I have a document using a labeled version of multibib, i.e. \usepackage[labeled]{multibib}. However, hyperref does not work on the cites and according to "Why does hyperlink point to a wrong page when ...
2
votes
1answer
66 views

multibib: setting margins

Using multibib, if I define a bibliography entitled "Primary literature" by using the following line: \newcites{prim}{Primary Literature} and then I write into the document block: ...
1
vote
1answer
326 views

Multibib: How to override the default appearance of bibliography section headers

Using multibib (and apacite), if I define two bibliographies entitled "Primary literature" and "Secondary Literature" by using the following lines: \newcites{prim}{Primary Literature} ...
2
votes
1answer
68 views

Mulitibib not linking to all .bib files wanted

I am running LaTeX on a Mac and am having problems trying to use the multibib package. the code I am running is (linking to relevant .bib files): \usepackage{multibib} \newcites{h}{Reference List ...
2
votes
0answers
162 views

Multiple Bibliographies - Basic

I'm try to use package which provides the multiple bibliographies first time. Before, I've used just standard thebibliography environment. Here is the example from bibunits package manual: ...
3
votes
1answer
436 views

Bibliography behave like section in the TOC

Is it possible to include the references/bibliographies in the TOC with an appropriate section number? Currently my MWE below results in the following image: My MWE: \documentclass{report} ...
5
votes
1answer
1k views

Multibib compiling multiple .aux files

I'm trying to run quite literally this exact example: specific citation style using multibib \documentclass{scrartcl} \usepackage[resetlabels,labeled]{multibib} \newcites{A}{References2} ...
1
vote
1answer
436 views

multibib package gving me an error “Extra \fi”

I'm trying to use the multibib package and my MWE is pretty much identical to the one in the manual but I keep getting an error. It says ! Extra \fi The weird thing is, even I don't do anything in ...
2
votes
0answers
239 views

\renewcommand{\bibheadtitle} not working with hyperref package [closed]

I had a document that properly divided my biblography into three sections with the help of multibib package, and forcing the Biliography Section Titles by means of a \renewcommand{\bibheadtitle}, but ...
6
votes
2answers
1k views

Multibib bibliographies as subsections

The reason why I need this modification is that I want to have a general 'Bibliography' section in which all the bibliographies created with multibib are included. At the moment my code (narrowed down ...
0
votes
1answer
137 views

show the numerical labels only in one subsections or entities of multibib package

uncommenting the following line in moderncv with multibib package show the numerical labels in the bibliography. \makeatother \renewcommand*{\bibliographyitemlabel}{[\arabic{enumiv}]} But how to ...
3
votes
0answers
5k views

Including DOI field in bibliography while using multibib package

I am new to Latex and I used multibib package and .bib file. Every thing works great except there is no DOI at the end of entities. All my entities in the bib file have DOI filed and url and I use ...
1
vote
2answers
838 views

Multibib, do NOT reset reference counter

Using the multibib package, I have two bibliographic sections. I do not want the reference counter to be reset, which I had thought should be the default case. At least this is what the package ...
1
vote
0answers
24 views

How to get rid of title in multibib [duplicate]

This is my first question here. I'm not a LaTeX expert and I'm writing my theses now. Anyway, I had to use multibib so that I can list my publications towards the beginning of the theses document and ...
4
votes
1answer
766 views

Process multiple bibtex files

I need your help to find a way to process multiple bibtex files in TeXworks for Mac. I have to do this because I am working with multibib. At the moment I select bibtex and press the green bottom to ...
1
vote
1answer
1k views

Natbib-Multibib problem with prefix labels

I am facing a problem when using natbib together with multibib and label prefixes. I want to define two bibliographies: One for literature of other people, with numbered references, and one for my own ...
1
vote
1answer
520 views

Using Multibib with Beamer

For the defense of my PhD, I have to finish my presentation with a complete list of my publication. In the manuscript, I used the multibib package to generate automatically the list and it works fine. ...