3
votes
2answers
41 views

Placing a minipage or a table on top of the right column

I am new to TeX, but I cannot find a solution to my problem anywhere. I have some text in two columns just after a page wide image (and this is not a problem). But I would like to add a little table ...
1
vote
1answer
33 views

How to adjust two pictures side by side in just one column of multicol environment?

First of all, thanks to the group member Harish Kumar because of whose advise finally I was able to fix the caption line under the figure/ float in multicol environment. This is what I then faced: ...
1
vote
1answer
24 views

How to have a figure with caption in multicol enviornment?

Hello respected everyone. I am having the following problems. Kindly help me on this regard. \documentclass[10pt, twoside]{book} \usepackage{graphicx} \usepackage{subfig} \begin{document} ...
1
vote
0answers
36 views

Prevent full page image in multicols

While placing a full-width image in the multicols environment using \begin{figure*} ... \end{figure*} if the figure is larger than some fraction of the page, it takes up a whole page on its own, ...
2
votes
1answer
45 views

Landscape table in multicol-environment

I am facing a very weird problem; see the output: I am trying to get my table in the landscape mode within a two-column layout. Therefor the package "multicol" is used. The table does not appear on ...
5
votes
2answers
105 views

How to place a multicolumn table above a multicolumn figure?

I have a table that spans two columns of a page. I have a figure that also spans two columns. I tried adjusting the h, t and the * in different fashions, but I couldn't get it to work. The figure ...
0
votes
0answers
131 views

“Call out box” in a two-column document

I suppose "call out box" probably doesn't have much of a meaning in the TeX world, but a (framed) "box" probably isn't specific enough for what I mean. Anyway, I am compiling the following with ...
0
votes
0answers
60 views

Floats in multicols require case-by-case manual placing

I have struggled with this issue for a while now. Judging by the number of similar questions, I'm not the only one. I find Herbert's solution to this question by far the best available. There is only ...
1
vote
1answer
612 views

Caption below lstinputlisting in multicols + redefining lstlisting caption format

I have 2 problems with caption for lstlisting. I can't get the caption of lstlisting to go below the list when it's in a multicols environment. Although I've added ...
12
votes
2answers
112 views

Color leak from multicols within a figure

The text at the bottom of page 2 is red, despite the fact that the color change in the code below originates from \color{red}\normalcolor within the multicols within the figure and should naively ...
5
votes
2answers
98 views

span x columns in y multicol environment

Currently I'm using the baposter document class and one of my figures would take exactly 3/4 of the given poster block. So, pretty much, there's a box, \headerbox{options}{ sketch goes here } ...
1
vote
0answers
73 views

Automatic placement of picture in multicol environment at top, bottom, or middle of column

Having a multicol document spanning over several pages with pictures (includegraphics, width=\columnwidth), I am looking for a way that LaTeX chooses the best position for the picture or at least ...
1
vote
1answer
204 views

Table (page width) in multicol?

I'm writing a scientific article (two-column style), and I need to show some results in a table with lots of columns, so I have to put a page-width table in the bottom of the page. How can I do?
4
votes
2answers
275 views

Table of 2x2 tikzpictures

I'm attempting to condense 4 tikzpictures into a smaller space in my document. The solution I have is as follows: \documentclass{article} \usepackage[paperwidth=6in, paperheight=4in]{geometry} ...
8
votes
1answer
235 views

How to fix a figure at the top or bottom of a column within multicol?

Within the multicol environment I want to be able to fix a figure to be displayed at either the top or bottom of a column (as in a scientific journal). The figure environment cannot be used in ...
8
votes
1answer
1k views

Vertical Centering in a multicols

In a document I have several multicols units, in which on one side there is an image and on the other side some information in a itemize. Now, depending on the image / information, the two "sections" ...
4
votes
1answer
385 views

Spacing in multicols environment with figures

I have the following lines: \documentclass[a4paper,landscape,12pt,oneside]{scrbook} \usepackage[english]{babel} \usepackage{multicol,lipsum} \usepackage[demo]{graphicx} \usepackage[utf8]{inputenc} ...
2
votes
1answer
78 views

Section outside multicols environment if section contains a table

I am using \begin{multicols*}{2} to split my text in two columns on the landscape format paper. Now if I have a tabular, it resizes the tabular to \linewidth. What I want is to ask if there is a ...
3
votes
2answers
5k views

Insert figure in a multicol article

I am trying to insert a figure with a caption into a multicol article. When the figure was inserted on its own, it was fine: includegraphics[width=0.5cm]{image} However, when I tried to insert the ...
7
votes
1answer
2k views

Three-columns text with figures of 2\columnwidth

Although in multicol environment (not the twocolumn option in document class) is problematic to place floats, there are some ways to put figures within a single column or occupying the entire width of ...
3
votes
1answer
1k views

How to insert algorithm inside multicols environment [duplicate]

Possible Duplicate: Placing figures inside a two-column document Here is my MWE: \documentclass{article} \usepackage{multicol} \usepackage{algorithm} \usepackage{algpseudocode} ...
3
votes
1answer
837 views

Multicolumn image

How can i span image across two columns in multicolumn environment? I want to create something like this: c1 Image c1 Image c1 c2 c3 c1 c2 c3 (c1, c2, c3 = columns) It can be done in ConTeXt: ...
26
votes
4answers
31k views

Placing figures inside a two-column document

I'm trying to get images in my document in two different ways: On top of the entire page, centered On top of a single column I tried it with both twocols and multicols. I ruled out twocols because ...
12
votes
1answer
9k views

How to float figure within multicol text

I have a simple two-column text, and want to place figures within the text. I used this code \documentclass{article} \usepackage{multicol} \usepackage{graphicx} \usepackage{caption} \begin{document} ...
4
votes
2answers
1k views

Hypcap not working with custom figure environment

I'm trying to use caption with hypcap=true so that cross-reference hyperlinks will go to the figure instead of the figure caption. However, I'm using a multicol environment with a custom figure ...
8
votes
2answers
2k views

Include floated figure in two column environment

I'm using a two column layout and I'm trying to get a figure to appear on the bottom of the page it's currently on. Floats don't work natively in a multicol environment. Right now I'm getting around ...
3
votes
1answer
767 views

multicols, lstlisting and float

Using the following structure, how can I get the listing to stay on the same page, be it at the top or the bottom? \documentclass{scrartcl} \usepackage[ngerman]{babel} \usepackage{multicol} ...
4
votes
1answer
184 views

Getting floating objects in multicol environments

I am using multicol with 2 columns, and I would love to have my figures and tables to float, so that I don't have to manually mess around with the positioning anymore. I am aware of figure*, but I ...
4
votes
2answers
4k views

Listing and Tabular in Multicols enviornment

I want to use the multicols environment to display a listing beneath a table: \begin{multicols}{2} \begin{lstlisting}[] ..... \end{lstlisting} \columnbreak \begin{table} \centering ...
1
vote
1answer
578 views

Setting table placement as “here” in a multicol environment, spanning 2 columns

I have a problem with table placement. I want the table to be anchored to the position where it occurs in the text (i.e. "here", "h") and the columns should simply wrap around it. The table should ...
1
vote
3answers
20k views

latex two column layout set figure to load on single column

this is the double column code \begin{multicols}{2} \begin{figure*}[!ht] \centering \includegraphics[height=60mm]{CC.jpg} \caption{AA \cite{BB}} \end{figure*} \end{multicols} But the ...
25
votes
2answers
15k views

multicol and figures

I have a two column document (using multicol) and want to insert figures so that they do NOT span columns. I have searched around and the only thing I can find says that only figure* is supported ...
5
votes
1answer
3k views

Column width in multicol and using float environments

I'm trying to write my first report ever using LaTeX. I want it to have two columns so I'm using the multicol package. The columns are too narrow though, I want it to be wide like, say, elsevier style ...
5
votes
1answer
2k views

full-width tables in multicolumnar text

If I create a table in twocolumn, the text on the second column overlaps the right half of the table. If I use a table*, whether with twocolumn or multicols, it instead is moved to the next page. ...
7
votes
3answers
4k views

How can I create a multicol “figure”?

I have the following, somewhat minimal, example: \documentclass{article} \usepackage{multicol} \begin{document} \begin{multicols}{2} \begin{minipage}{\textwidth} \begin{framed} The function ...