{multicol} is about the multicol package and its multicols environment which allows to typeset text in multiple columns (up to 10) and to balance the end of each column at the end of the environment. For questions about multi-column areas inside a table, use {tables} plus {multicolumn} instead.

learn more… | top users | synonyms

8
votes
1answer
121 views

LaTeX: Balanced twocolumn Text with Footnotes only in the right column (ftnright)

Do the packages ftnright and balance work together? I'm looking for a solution to generate a twocolumn text in LaTeX. My footnotes should appear at the bottom of the right column. However, my main ...
2
votes
2answers
301 views

How to place two figures side by side in multicol

I would like to place two figures side by side in two column environment (Both figures fitting withing a single column) I have read the answers but it's not working for me. The figure is placed on the ...
3
votes
1answer
62 views

Space between rows in mdframed environment

i'd like to reduce the space between two rows in an mdframed environment. \mdfdefinestyle{round}{ innertopmargin=0pt,innerbottommargin=10pt,innerleftmargin=1pt,innerrightmargin=1pt, ...
11
votes
1answer
107 views

Two rules between multicols

I'd like to add two rules between two columns of a multicols environment. For adding one I used \setlength{\columnseprule}{0.2pt} but how can I add two?
2
votes
2answers
72 views

Balancing and making the references into 3 columns

I'm using the below coding in a Tex file and getting the output in 2 columns. \documentclass[twocolumn]{article} \usepackage{lipsum} \begin{document} \lipsum[1-4] \begin{thebibliography}{9} ...
6
votes
1answer
68 views

How do I find memoir's margin settings for twocolumn mode?

I have a long document that I don't want to use twocolumn mode for, but I like the margins it uses. I'm going to manually use multicol to create two columns instead (so I can easily have footnotes and ...
3
votes
1answer
63 views

Reducing height of multicol separator line

I am bodging a table using multicol and rule so that I can have cells of dynamic sizes and populate it using a macro rather than manually. It mostly works, however I would like to reduce height of ...
4
votes
3answers
204 views

Making size of a 4x4 matrix that consist only 2 parameter of 2x2 matrix to be same size as 4x4 matrix

From the picture below, both are supposed to be 4x4 matrices, but I want to express the first one with 2x2 matrix within 2x2 matrix where the J1 and J2 are 2x2 matrices while the 0 is 2x2 zero matrix. ...
6
votes
1answer
95 views

One column text under chapter title in memoir twocolumn mode?

I want to have one column text underneath the chapter name in twocolumn mode (where the majority of the text is in twocolumn). I can't. Even using onecolabstract doesn't do it. ...
1
vote
0answers
20 views

Place section header outside multicols environment [duplicate]

Is it possible to do something like ... \end{multicols} \section{A very long header that looks ugly if it does not span the columns} \begin{multicols}{2} Lorem ipsum dolor ... \end{multicols} ...
1
vote
3answers
212 views

Margin notes, multicols, tikz overlay

As seen on page 200 of pgf manual is there a way to put notes in the margin but on the same level as the place it is called ? One can deal with the right-left positionning with the help of this ...
1
vote
1answer
85 views

Multicolumn overflow

I'm compiling a list of theorems and definitions from a math textbook (Mörters and Peres's "Brownian Motion"). Each item on the document (e.g. a definition, a theorem, a comment) opens with a title or ...
6
votes
2answers
312 views

Spurious [?] vertical space introduced by multicols

In the example below, you'll notice, in the first box, a slight spurious vertical space before the text actually starts, and probably introduced by multicols. Do you know how to get rid of it? ...
4
votes
1answer
115 views

balanced longtables, multicol and page breaks

For a long time, I have been looking for a nice way to have balanced tables inside a multicol environment. Especially, I would like to have automatically balancing multicol-tables inside a table ...
6
votes
2answers
237 views

Multicol layout with consistent blank column

So I am looking to create a standardized test with math questions going down the left side of page with space for figuring on the right side of page. My goal is to get code that is clean, where I ...
1
vote
0answers
46 views

Alignment with Multicols and Polyglossia

I'm working with a two column multicol environment for an English-Yiddish dictionary (using XeLaTeX and Polyglossia). I have a couple of issues, and I'm putting them all together because I'm not sure ...
1
vote
1answer
124 views

Two column Algorithmicx with variable-width columns

In another post, @Jubobs suggested to use the multicol package around an algorithmic environment, to typeset the algorithm in two columns. Recently, I faced a rather aesthetic issue: It might be the ...
1
vote
1answer
222 views

Problem producing a pie chart

I tried producing a pie chart with pgf-pie (which seemed easy to me), but it was not available on my system and on MiKTex. So I tried this unsuccessfully. Kindly help. \documentclass{beamer} ...
2
votes
0answers
49 views

Two-column beamer ToC with control over the breaking point and without balancing

I'm using the solution provided by lockstep in https://tex.stackexchange.com/questions/26929/two-column-beamer-toc-with-control-over-the-breaking-point to spread the TOC over two columns. However, ...
6
votes
2answers
125 views

Nested enumerate with multicols

I am currently working with nested enumerate environments in which the second level is typeset using a multicols, as follows : \documentclass[12pt, letterpaper]{article} \usepackage{amsmath} ...
3
votes
2answers
99 views

How to left align text in two column itemize

When I use following MWE for getting itemized text in two columns, the item in the list sometimes take a "justified" formatting and thus there is significant space in between two words. This produces ...
4
votes
1answer
62 views

Breaking a multicol over a column in a multicol environment

I have a nested multicol environment like: \begin{multicols}{2} Text \begin{multicols}{2} lots of text \end{multicols} \end{multicols} my problem is the nested environment becomes longer than the ...
4
votes
2answers
428 views

Two enumerated lists side by side

I am trying to replicate the image below, but what I currently have gives awkward spacing on the two lists. Could anyone advise me as to how I could mimic the picture? ...
0
votes
0answers
203 views

supertabular with multicols - automate shrinkheight and prevent page break

I want a long-table in two-column mode in a book I am typesetting. I came across a hack to make supertabular work with multicols here. The following MWE works - \documentclass[twoside]{book} ...
6
votes
1answer
879 views

How to propely use the multicols package in beamer?

Here is a small example. \documentclass{beamer} \usepackage{multicol} \usepackage{lipsum} \setlipsumdefault{1-1} \begin{document} \begin{frame} \tiny \lipsum \begin{multicols*}{2} \lipsum ...
6
votes
1answer
238 views

how to make ragged bottoms of columns in multicols when preventing page breaks?

The setup: I need to use multicols for say 3 columns where I have many small sections. I noticed that some sections are broken in the middle and end up wrapping to the next column, which I do not ...
4
votes
1answer
132 views

How to use table in multicols env. with paragraphs p{} and \multicolumn as well?

updated question I am going to start all over. Will make the question very simple and direct. Will leave the original question below. I simply want to see an example of using \multicolumn in a table ...
3
votes
1answer
78 views

In a multicol with a separating border, set a margin between the border and the content

I have a minted code listing, displayed in a multicol environment with a separating border between the columns: The border is too close to some of the content, like stracka(1,sg,ka). and ...
2
votes
1answer
880 views

!Misplaced \omit.\multispan ->\omit@\multispan

I am trying to show 4 .jpg files in 2x2 format using the following: \begin{figure}[htb] \centering \begin{tabular}{@{}cccc@{}} \includegraphics[scale=0.26]{error1.jpg} ...
1
vote
0answers
86 views

LyX headers and footers don't span page [closed]

I'm creating a document using LyX with various packages in the preamble. I'm setting different fonts, setting colours and I have multicols working. The problem is that for some reason, the headers and ...
5
votes
1answer
346 views

Balance columns at new pages in multicol

I am creating a document that uses a mixture of 1- and 2-column layouts with the multicol package. I would like to be able to balance the columns and have some text spanning both columns before ...
5
votes
1answer
305 views

Span text across columns in multicol

I am writing a long document with memoir class and multicol package, mostly writing in 2 columns. I am trying to insert a framed text that spans across the two columns, but does not break the flow of ...
2
votes
3answers
270 views

\renewcommand or \renewenvironment with multicols

I'm trying to create a horizontal white space in my multicolumn environment every time I start a new subsection. It stops people from having to trawl their eyes up and down the page between ...
1
vote
0answers
61 views

register-true in multicols environment

I have a multicols* environment with sections and subsections and list environments and I want the text "registertrue", i.e. the lines are all on the same level ACROSS the columns.(If you were to ...
0
votes
0answers
127 views

“Call out box” in a two-column document

I suppose "call out box" probably doesn't have much of a meaning in the TeX world, but a (framed) "box" probably isn't specific enough for what I mean. Anyway, I am compiling the following with ...
5
votes
2answers
81 views

How to add columns optionally per section

How would I add optional columns under a section. e.g. (fyi image from a random online resume): So if I decide to remove any of the years listed, the text should not shift.
2
votes
2answers
150 views

Suppress a \smallskip at page/column bottom

I have a command that works similar to this simplified command: \newcommand{\revEntry}{#1}{ #1 \smallskip } In my document I have lots of such entries in a multicolumn environment, and now ...
5
votes
4answers
181 views

Exam Class: how to avoid question going beyond margin

I'm able to create question paper using LaTeX code mentioned below: \documentclass{exam} \usepackage[margin=0.7in,headheight=3.5\baselineskip,headsep=1\baselineskip,includehead]{geometry} ...
0
votes
0answers
59 views

Floats in multicols require case-by-case manual placing

I have struggled with this issue for a while now. Judging by the number of similar questions, I'm not the only one. I find Herbert's solution to this question by far the best available. There is only ...
6
votes
1answer
62 views

Conditionally add multicols to enumerate environment

I would like an environment to be called by \begin{myenv} that conditionally adds multicols if called by \begin{myenv}{<number of columns>}. This is what I tried: \documentclass{article} ...
2
votes
1answer
381 views

Problem having an aligned column using multicol

I'm having problems getting a good-looking column. (The text is in Danish.) What can I do to get them aligned? \section{Teknologianalyse} \subsection{Teknik} \begin{multicols}{2} ...
4
votes
1answer
204 views

How do I make tabu and multicol play nice with each other? [closed]

I'm trying to write a document that will require lots of small tables (which contain other, nested tables) in a section of my document, which I want to put into a two-column section. I use tabu for ...
1
vote
1answer
161 views

EXAM Class : Choice next to each other

Currently using multicol and exam class I'm able to generate MCQ question paper in the formats mentioned below: Q.1 : Quiescent centre is found in plants at : A. Shoot tip C. Root tip ...
10
votes
1answer
70 views

How to make the TOC's part entry in one column while the others in two columns?

I use the tocloft package to design the Table of Contents. I want the part entries listed in one column and all the other entries such as chapter, section, subsection ... should be listed in two ...
1
vote
1answer
579 views

Caption below lstinputlisting in multicols + redefining lstlisting caption format

I have 2 problems with caption for lstlisting. I can't get the caption of lstlisting to go below the list when it's in a multicols environment. Although I've added ...
1
vote
1answer
298 views

Multicolumn vspace

I am trying to make a trifold brochure, and vspace is proving ineffective. Given: \documentclass{article} \usepackage[letterpaper,margin=1cm,landscape]{geometry} \usepackage{multicol} ...
3
votes
1answer
51 views

Height of tabularx containing a multicol

I would like to have a vertical label to the left of a multicolumn block of text. The easiest way to do this I have found is using a multicol environment as one of the cells in a tabularx table. The ...
5
votes
1answer
147 views

Title formatting with graphics

I am trying to achieve this look for my chapter titles: To achieve this formatting I use titlesec package like this : \titleformat{name=\chapter}[hang] ...
2
votes
2answers
519 views

Moderncv package with multicols set vertical space

I am currently finishing my CV using the moderncv package. To save space I decided to fit all my interests in a multicol environment with 4 columns nested inside an itemize environment. Unfortunately, ...
0
votes
0answers
21 views

Row wise list environment [duplicate]

Let us consider the following example : \documentclass[a4paper,10pt]{book} \usepackage{multicol} \begin{document} \begin{multicols}{2} \begin{enumerate} \item Text \item Text \item Text \item ...