{multicol} is about the multicol package and its multicols environment which allows to typeset text in multiple columns (up to 10) and to balance the end of each column at the end of the environment. For questions about multi-column areas inside a table, use {tables} plus {multicolumn} instead.

learn more… | top users | synonyms

1
vote
2answers
32 views

Problems to fit a table into a column of a twocolumn environment

I'm trying to fit a table into one column of a twocolumn environment but everytime I try to fit it in just one column, it disappears. What should I do ? \documentclass[10pt,a4paper,final,twoside]{...
1
vote
0answers
22 views

Using 4 column page and mdframes! No correct view

I'm writing a summary and I'm using a 4-column page with a lot of mdframed boxes (boxes that contains theorems and other stuff). I use also different files and I merge them like this: \begin{...
0
votes
0answers
14 views

Page filling set of numbers

I need a large list of 4-digit Numbers in my document. They should be displayed page filling and as compact as possible. My initial attempt was simply to put each one in a line, assign a small size ...
10
votes
4answers
5k views

How to achieve a multi-column layout for footnotes?

How can you achieve a multi-column layout for footnotes? I have one page filled only with a rotated table (landscape layout, the sidewaystable environment). The table is annotated by a lot of ...
12
votes
5answers
10k views

Split itemize into multiple columns

Is it possible to split an itemize list into several columns? (I'm sure it is, but I couldn't find a solution around here) And additionally: Is it possible to automatically split a list into multiple ...
0
votes
1answer
18 views

multicols* doesn't vertically justify all columns

I'm using the \begin{multicols*}{2} environment to typeset two-column text for a cd booklet. However, the columns aren't always properly aligned vertically. Concretely, I assume that whenever there's ...
1
vote
1answer
34 views

Put two columns into box

I wish to produce a PDF output like this : The closest I got so far was by using the multicols environment, as shown below. As you can see, the line contour of the box around the two columns is ...
1
vote
1answer
31 views

Customize the \columnseprule for one particular column in \multicols environment

I'm trying to do a poster presenting what the starting point of my thesis is about. For this, I'm using a \multicols environment composed of three columns. The problem is that I want a particular ...
3
votes
1answer
39 views

Adjusting the Size of Summation Symbol inside an Enumerate Environment

Situation: I am making a compilation of problems involving the summation symbol. Problem: I want to resize my summation symbols but unable to do inside the enumerate environment even with the relsize ...
4
votes
1answer
34 views

Two column toc in footnotesize with scrartcl: pagenumbers in toc are too large

I'd like to have a small table of contents in two columns. Everything looks as expected, except the pagenumbers in the toc: they are still at normalsize, instead of footnotesize, and still in rmfamily,...
1
vote
0answers
25 views

Common title to two columned page

I am writing my thesis using sharelatex online. I have prepared each chapter as a separate file and then collected them using nested option of include. I want one of the chapters in two columns with ...
7
votes
1answer
1k views

Issues with flushend (last citation cut, etc.)

I've been having issues using the flushend package to balance the last page's columns. I'm using it to balance bibliographies mainly. Flushend tends to (1) cut the last citation, (2) result in uneven ...
5
votes
1answer
488 views

Incompatibility between 'flushend' and 'lineno' packages!

I have observed when using flushend package to balance the references at the last page, if at the same time the package linenois loaded, the last page of reference will not be displayed. I have ...
3
votes
1answer
178 views

Conflict between multicol and arabtex

I need some arabic entries in a twocolumn index. The following document should work, I think: \errorcontextlines999 \documentclass{book} \usepackage{multicol} \usepackage{arabtex} \begin{document} ...
3
votes
0answers
60 views

How to make tcolorboxs fill a multicol page evenly

The question might sound weird due to my bad English. In short: I want a multicol page to be filled with tcolorboxes of different heights but (visually) evenly spaced between each other. In image: ...
1
vote
1answer
52 views

Footnote within a double column float

I have a double-column float that is used to insert a full-page box in a document. However, when I place footnotes in this box, the footnotes appear within the box (which is desired) but not in a ...
1
vote
0answers
31 views

Text vertically balanced across two pages

In a previous question, I asked how to keep two columns on one page, vertically balanced. The solution was perfect for that purpose. \newenvironment{overview}% {\onecolumn\vtop to 0pt\bgroup\...
3
votes
1answer
29 views

Error: "Something's wrong--perhaps a missing \item.'' using multicol in a \newenvironment, can it be fixed?

The below works, but produces an error message Something's wrong--perhaps a missing \item. Does anybody know why it throws an error, and how to correct my code? \documentclass{article} \usepackage{...
4
votes
3answers
398 views

Write Equations side by side

My Code: \documentclass[12pt,a4paper]{article} \usepackage[a4paper,vmargin=0.7in,hmargin=0.7in]{geometry} \usepackage[utf8]{inputenc} \usepackage[misc]{ifsym} \usepackage{amsmath,amsfonts,amssymb} \...
2
votes
1answer
53 views

Multiple Choice Answers with Graphs

I need to have 4 graph options for a multiple choice question in LaTeX. I would like it to look like this picture. I have the graphs(tikzpicture inside minipage) with code before the \begin{...
2
votes
1answer
23 views

question on multicols width and minipages difference in section vs. main document

I am trying to split a page into 2 halfs, using 2 minipages side by side. So I made the following construct \begin{multicols}{2} \begin{minipage}[t]{0.45\textwidth} stuff here \end{minipage} % \...
3
votes
3answers
28k views

latex two column layout set figure to load on single column

this is the double column code \begin{multicols}{2} \begin{figure*}[!ht] \centering \includegraphics[height=60mm]{CC.jpg} \caption{AA \cite{BB}} \end{figure*} \end{multicols} But the ...
2
votes
0answers
54 views

Tex4ht: Lists inside multicols

I use the multicol package to generate "2x2" lists (two rows, two columns), which works fine with pdflatex but not with tex4ht. While multicol works with tex4ht generally, there seems to be something ...
3
votes
1answer
83 views

Unbalanced multicolumn environment + wrapping footer results in footer moving

When using an unbalanced multicolumn (multicols* environment) and my footer has a parbox with text that wraps, the footer moves upwards. Anyone know why this is happening and how I can have it not ...
1
vote
0answers
30 views

Insert Figure in multicolumn environment [closed]

I have problems with the package multicol. I have read a lot about solutions, but still it does not work. I have used the following packages: \usepackage{amsmath}% \usepackage{amsfonts}% \usepackage{...
1
vote
1answer
22 views

Custom horizontal alignment in multicols environment

If I utilize the two columns of multicols for my Kurdish sequence of numbers, it arranges the items in column like the following figure: But I want to arrange the items in rows splitted by some ...
37
votes
2answers
30k views

multicol and figures

I have a two column document (using multicol) and want to insert figures so that they do NOT span columns. I have searched around and the only thing I can find says that only figure* is supported ...
3
votes
3answers
104 views

Multicols inside Tcolorbox breaks page before long Multicols (and doesn't listen to pageheight)

As can be shown when compiling the following MWE, the page-height (2inch) allows for 11 lines of text per page (cf. page 1), since Twelfth line and Thirteenth line are sent to page 2. After those ...
3
votes
2answers
23 views

Columnbreak is offsetting column alignment

I've a problem with multicols environment. Whenever I insert a column break, it offsets the vertical alignment of the two columns. Here's a MWE: \documentclass[12pt]{article} \usepackage{geometry} \...
3
votes
2answers
118 views

Align columns correctly in multicolumn environment [duplicate]

I have the following table: \documentclass[a4paper,11pt]{report} \usepackage[english]{babel} \usepackage{booktabs} \begin{document} \begin{tabular}{|cc|ccc|} \hline \multicolumn{...
1
vote
0answers
29 views

Hebrew with English in a multicol setting

I'm trying to write a cheat sheet for a physics course, so the document is to be divided to 3 columns or so, using multicol. I've managed to get through the configuration of Hebrew and of the multi-...
1
vote
2answers
74 views

\vfill does't work after upgrading texmaker

I recently upgrade MikTex and TexMaker to the latest version (2.9.5840 and 4.5 respectively) for another reason. the problem is that the command \null \vfill before and after column content won't ...
1
vote
1answer
35 views

Weird multicols problem

I have the following code with multicols and but the weird thing is that when I type in the multicols environment, it follows that the text automatically gets moved into the next column automatically ...
1
vote
0answers
37 views

Two columns in Revtex

I am doing a list of problems for my students and I am using Revtex (the AIP template in ShareLaTeX). One of the problems has a lot of small items so I would like it to be in two columns (inside the ...
2
votes
2answers
52 views

change columns order using multicols

I've divided a Hebrew paragraph to 3 columns, using \begin{multicols}{3} with \end{multicols}. The problem (since in Hebrew we write from right to left) is that the columns came up in the opposite ...
3
votes
3answers
52 views

Wrap text around figure on whole page

In my document I have a huge data flow graph that is exactly one page high. Since it is not very wide I'd like to have it on the left/right side of one page while having normal text on the other side. ...
4
votes
1answer
58 views

Uniform line spacing in columns

I have 2 columns of text, with most text in regular size, and few paragraphs in smaller size. I'd like to have the line spacing (roughly) uniform - that every line in the left size will match a line ...
1
vote
0answers
46 views

Aligning gb4e examples in multicols

For reasons of space I am trying to put pairs of correct and pairs of wrong examples next to each other in multicols environment. However, no matter what I do, they never align correctly. I tried \...
2
votes
1answer
98 views

Single-column figure makes other column blank

I am editing a two-column paper (IEEE Conference Template) and there are some single-column figures to put into it. The code is listed below: \begin{figure}[t!] \centering \vspace{-0.1in} \...
1
vote
1answer
28 views

Multicolumn environment in custom environment

I want to use the multicol-package in my own environment by using a counter, such that it looks like \newenvironment{Test}{\ifnum\theCnt=1% \begin{multicols}{1} \else \begin{multicols}{2} \fi}...
1
vote
1answer
110 views

How can I get two columns in moderncv

I'm trying to use multicol to get moderncv to put text in two columns, but it turns out that the columns don't get narrowed and both are mashed together. \begin{multicols}{2} \section{Experience} \...
1
vote
0answers
57 views

Is there a way to justify ALL LINES of a given paragraph? [duplicate]

I would like to set the paragraph alignment to "all lines", like in Adobe InDesign, see screenshot below: Is there a way to do it with LaTeX? And if yes, will it work with the multicol package ? ...
2
votes
2answers
181 views

Exercise sheet with two enumerated columns

Do you have a simple, minimal template to type Exercise sheets with exercises enumerated with two columns (please check image). Thank you.
0
votes
0answers
27 views

Height of enumerate items in multicols environment for proper alignment

For some problem sheets I have been using the shortenumerate package with hardcoded widths for the columns so far and I wanted to use multicols instead which is a lot easier to use. However the ...
5
votes
2answers
243 views

How do you place texts “side by side”

I want to create something like this: The left hand side has the definition and right hand side we have examples. The left hand side and the right hand side could be simply separated by a "\qquad"....
0
votes
1answer
43 views

package xskak: problem with a line break in the notations

I have a problem with the combination of the packages xskak and multicols. Please look at the 7th move: LaTeX does not write the number of the move (7) and the move itself (O-O) in the same line. That ...
3
votes
1answer
67 views

Beamer box problem

I am working in "Frankurt" theme on my beamer presentation. Sometimes I am faced with overflow problems. For example: \begin{frame} \begin{definition} \begin{multicols}{2} \begin{enumerate}[a)] \item ...
3
votes
1answer
30 views

Multicols leads to subsubsection title and content being on different pages

I'm am using the multicols environment in a subsubsection. But in the Output in prints the Title of the subsubsection on a different page than the content, i.e. the multicols text. already tried \...
0
votes
1answer
70 views

how to fit merged columns/rows content to the appropriate cell width?

Hi what is the best way to make the red text fit the width of the merged cells/rows and automatically break the line instead of causing overflow to the next cell and cells content confusion ? PS: i ...
2
votes
1answer
62 views

Multicols with includegraphics in bottom of the page

In my document i have a picture in a multicols env. The problem is that Latex put the multicols in the bottom of the page and the picture is going under the footer. Latex should create a new page. ...