{multirow} is a package for facilitating multirow cells in {tables} and {arrays}.

learn more… | top users | synonyms

0
votes
0answers
22 views

Table error after using \cline [duplicate]

I try to create bigger table in TeXworks where are different horizontal as well as vertical lines. Everything works fine but it always crash on the \cline command (when I use \hline it works ...
1
vote
1answer
559 views

How to create table with multiple multirows and multi columns [duplicate]

I try to create a table like to one here: I tried many options with \multirow and \multicolumn, however, after few hours I'm not even close to the final result. Any ideas how could I achieve this? ...
2
votes
0answers
46 views

Error “Undefined control sequence” [duplicate]

hi there i need help im building a table but i always get this error here's my code: % Table generated by Excel2LaTeX from sheet 'Sheet1' \documentclass{article} \usepackage{booktabs} ...
2
votes
0answers
54 views

How to automatically set the height of the combined cell when using multirow package

Here is the simplified code to demonstrate my issue: \documentclass[11pt]{article} \usepackage{multirow} \begin{document} \begin{tabular}{|c|c|c|} \hline & & \\ \hline \hline ...
2
votes
0answers
143 views

overfull vbox if multirow is bigger than usual

I have the following table which gives an overfull vbox because the multirow takes more vertical space than each of the rows it spans. Also, I would like the multirow to center vertically if possible. ...
1
vote
0answers
61 views

pgfplotstable: how to repeat row entries and combine it with external data [closed]

I want to combine the table data (in a file A.txt) -0.13336 -0.13634 -0.13336 -0.11589 -0.136 0.76158 0.63087 0.76158 0.95729 0.63 0.9543 0.59712 0.9543 0.90589 0.59712 0.17172 0.13013 0.17172 ...
3
votes
2answers
363 views

Multiple paragraphs in a multirow cell?

I'm trying to write multiple paragraphs inside a multirow cell,... but I can't find how! I've tried a lot of options, but none of them worked. First of all, I'll show you what I would like to get: ...
3
votes
1answer
975 views

Losing the vertical line on my table when using multicolumn

I tried to use this for the last part of my table, but I can't get a vertical line at the end. Does anyone know? \begin{tabular}{|CC|C|C|C|C|C|C|C|C|C|C|}\hline \Tab{Method Based on \\\hline ...
0
votes
1answer
79 views

Table lines and alignment problem

I'm using sidewaystable environment with the following configuration: \documentclass[a4paper,oneside,12pt,openright,final,oldfontcommands]{memoir} \usepackage{multirow} \usepackage{booktabs} ...
1
vote
2answers
241 views

Why won't my \otoprule command work in table formatting?

Primer: I'm very new to LaTeX. I am creating a table with the following code. Here is part of the table: \usepackage{tabularx, multirow, booktabs} \begin{table}[tp] \caption{Rain garden site ...
1
vote
0answers
472 views

Packages multirow and columncolor give ugly stripes

I have two problems on one slide. This is an example: \documentclass{beamer} \usepackage{graphicx} \usepackage{tabulary} \usepackage{colortbl} \usepackage{multirow} \usepackage{xcolor} ...
2
votes
1answer
4k views

Is it possible to use \cline multiple times when using multirow?

\documentclass{article} \usepackage{multirow} \begin{document} \begin{table}[ht] \begin{center} \begin{tabular}{|c|c|c|c|c|c|c|c|}\cline{3-8} ...
3
votes
0answers
284 views

Evenly split the columns of a multirow table in lyx

I would like to have a table like this: % Preview source code %% LyX 2.0.6 created this file. For more info, see http://www.lyx.org/. %% Do not edit unless you really know what you are doing. ...
1
vote
0answers
31 views

how can i add more space on Table [duplicate]

My code is here. \begin{table}[t] \centering \begin{tabular}{|c|c|c|} \hline Graph $G$ & Graph $H$ & An isomorphism between $G$ and $H$\\ \hline ...
1
vote
1answer
360 views

Using multicolumn and multirow together with spreadtab

I tried this piece down \documentclass[a4paper,12pt]{article} \usepackage[inner=0.75in,outer=0.65in,top=0.75in,bottom=0.65in]{geometry} \usepackage{multirow} \usepackage{spreadtab} ...
5
votes
1answer
301 views

How to adjust the width of a wrap text sideways column header in tabular [duplicate]

I am trying to create table as below, in Texmaker. here i am facing following issues. To wrap text the column headers from 4 to 6 and align it center. Hspace on paragraph [row 3 last column] is ...
2
votes
1answer
218 views

How to adjust the width of a wrap text sideways column header and width of a paragraph cell in tabular

I am trying to create table as below, in Texmaker. . here i am facing following issues. To wrap text the column headers from 4 to 6 and align it center. Hspace on paragraph [row 3 last column] is ...
2
votes
1answer
280 views

How to vertically center a table cell content when using sideways?

I have the following table: \documentclass{article} \usepackage{graphicx} \usepackage{multirow} \usepackage{adjustbox} \usepackage{rotating} \begin{document} \begin{table}[htbp] ...
2
votes
1answer
190 views

Multirow results in text overlapping border

when using multirow in the following example, the content of the multirow cell is placed above the cell border. Is there any means to remove the border automatically where multirow is used? Code: ...
7
votes
1answer
12k views

Formatting of Tables in Latex, using multirow and multicolumn together

When I used this piece down, I got. \documentclass[a4paper,12pt]{report} \usepackage[inner=0.75in,outer=0.65in,top=0.75in,bottom=0.75in]{geometry} \usepackage{graphicx} \usepackage{url} ...
4
votes
1answer
168 views

How to control the multirow table to fit in one column?

I have a multirow used in twocolumn format. The issue is that when I used some circled characters, the column of the table widened to invade the next column. How can I control the multirow table to ...
2
votes
1answer
393 views

How can I put some white space between consecutive bigdelim braces in tabular, without inserting space between rows?

In one column of a table (using the tabular environment), I have consecutive braces created using the bigdelim package, as in the following: &\rdelim\}{3}{60pt}[\ S--S--L] & & ...
2
votes
0answers
188 views

How to expand row height while using long text in multirow?

I m working on one table which has one row which spans over 3 rows but text in this row is very lengthy so it uses more than 3 lines so all text is not visible. How can i increase row height ...
4
votes
1answer
383 views

How to create this table for multi-line rotated text and thick vertical lines?

I want to create the table below and I am not sure how to do it. I also want the lines that say, "Long line of text really long" to be wrapped, and take up 2 instead of 1 so that the table isn't as ...
1
vote
1answer
205 views

Automatic vertical alignment of multirow cells

I have this MWE \documentclass{article} \usepackage{multirow} \usepackage{bigstrut} \setlength{\bigstrutjot}{2pt} % height added by \bigstrut \usepackage{tabu} \tabulinesep=1.5pt % ensures some ...
4
votes
1answer
114 views

Dynamic Table/Multirow with xstring macro

i'm getting a little bit lost with the following. As i'm quite new to using TeX for more than just typesetting, i hope to get some help here. I already searched this forum for some helpful posts and ...
1
vote
1answer
410 views

multirow with paragraph

I created a multirow table in LyX. When I tried to convert it to PDF, LyX hang and I had to kill the process. Finally, I narrowed the problem down to a MWE where there is only a single multirow cell, ...
6
votes
1answer
115 views

Using multirow with smallmatrix

I'd like to typeset a bunch of small 3x3 matrices to describe generators of certain ideals, as in this paper, p7. Using smallmatrix works beautifully as long as I only want circles and bullets, ...
0
votes
2answers
543 views

Multiple figures layout

I have 5 figures: A, b, c, d, e. I have a question in laying out multi-figures like below: --------- A | b c A | d e { A } is a single long figure using multirow --------- ...
5
votes
1answer
231 views

Clashing multirow with tikz

In order to get a diagonal line in a cell, I picked up a piece of code from Diagonal lines in table cell The code adapted to my situation works fine until I decide to use multirow. Here is the MWE. ...
3
votes
2answers
604 views

Text in multirow overlaps the next row

Suppose, I want to create a table like this: I decided to use \multirow with \newline. But the \multirow cell is not stretched vertically: Code: \documentclass{article} ...
2
votes
2answers
578 views

Multicolumn/multirow inside align

Is there a way to use \multicolumn or \multirow inside an array environment which is inside align environment? For instance, the following piece of code gives me an error. What is the way around this? ...
7
votes
1answer
712 views

How to create a table with merged columns and rows, and wrapped text, like in MS Word?

The above can easily be created in MS word, but how can I create something like this in latex? Basically changing the columns for specific cells, merging a bunch of cells together, wrapping text in ...
5
votes
1answer
202 views

Multirow in multirow

I am trying to get this to work. It is supposed to have a cell (that was already created with multirow) with three rows but I do not know how to get it to work. I am using shortstack to get it, but ...
2
votes
1answer
88 views

Column line overshooting the horizontal line in table

\begin{tabular}{|m{3.5cm}|m{5.5cm}|m{4.5cm}|} \hline \emph{Category of Benefits} & \emph{General Benefit} & \emph{Operational Advantages} \\ \hline \multirow{3}{*}{\pbox{3.5cm}{Robust ...
4
votes
1answer
201 views

Color in multirows

I have a similar problem to that on the post xcolor package; color multirows with the following table. The four-row-cell containing the word 'HHeader' should be completely gray. I have tried to ...
3
votes
1answer
826 views

Multirows, multicolums and vertical centring in the tabu environment

I have a table, using the tabu environment, in which I would like multirow and multicolumn cells. Inside the cells, any content that doesn't vertically fill the cell should be vertically centred. ...
1
vote
1answer
333 views

How to implement this table in LaTeX

I really tried hard to do this on my own, but I keep failing ... Using multi-column and multi-row commands confused me. I know some of you might frown upon such a request but I really need help ...
1
vote
1answer
376 views

How to properly use tabular within \multirow?

For \multirow{3}*{\minitab[c]{India \\ Canada}} I get various error messages in the code below; whereas both \multirow{3}*{India Canada} and \multirow{4}*{\minitab[c]{Common \\ g text}} & ...
8
votes
2answers
15k views

Misplaced \noalign

Unfortunately I cannot solve the error with noalign on my own: ! Misplaced \noalign. \hline ->\noalign {\ifnum 0=`}\fi \hrule \@height \arrayrulewidth \futurelet... l.12 ... ...
3
votes
3answers
340 views

How to get the braces in the multirow spanning all three rows?

In the following table I would like to have the braces in both multirows span the three rows that the multirow is covering. I tried using \left.\right\} and editing the vertical space, but nothing has ...
1
vote
1answer
220 views

multiple uses of multirow

I'm trying to create a table in LaTeX using the multirow package that is such that we have in the first column, a row that spans six (with a title/whatever in it) with an empty space in the top row, ...
1
vote
0answers
11 views

Multiple uses of multirow in LaTeX [duplicate]

I'm trying to create a table in LaTeX using the multirow package that is such that we have in the first column, a row that spans six (with a title/whatever in it) with an empty space in the top row, ...
4
votes
2answers
763 views

How to get line-breaking / multirow to work in the caption of my beginner's table?

How to get line-breaking / multirow to work in the caption of my beginner's table? \caption{this is my first table's captive caption} I'd like the caption to look sth like this: this is my ...
1
vote
1answer
515 views

How to get line-breaking / multirow to work in my beginner's table?

I can't seem to get the multirow or pbox to give me a line break (of "automatic" width). The following won't compile successfully: note the two variations in the "TOTALLY" line. How can I fix it? ...
6
votes
1answer
176 views

Table Configuration

I'm new to LaTeX, and I'm currently struggling with trying to create a table for a lab report. The table has to look like this: I have tried looking at the \tabular, \tabulary and \tabularx ...
5
votes
1answer
399 views

Table - remove row lines in column to furthest right

How do I remove row lines in the column to furthest to the right. I have seen examples where they do it the left. I would like the "powers" from the table here to be on the right side instead of the ...
4
votes
1answer
656 views

Problem while using multirow with graphics

I have a problem with the multirow command. \begin{array}{|c|c|} \includegraphics[width=1.5in]{1} & \multirow{2}{*}{ \includegraphics[width=1.5in]{3} } \\ \hline \includegraphics[width=1.5in]{2} ...
1
vote
1answer
641 views

Longtable with multicolumn and multirow not working

I'm using a table generated from Excel2Latex in my document. Despite using longtable, the table gets truncated at the end of page after overflowing the bottom margin. Min. working example provided ...
1
vote
1answer
228 views

Extra space added in table with multi-rows and columns

I am working with a table with multi-rows and headers. The problem is when I run it, extra space is added both between rows and at the end of the last column. \documentclass{article} ...