{multline} is a math environment provided by the [tag:amsmath] package for single equations that span several lines.

learn more… | top users | synonyms

1
vote
2answers
113 views

Problem with right $ and {} placed in math formula

I have problem with my latex code. I read a lot about math text formating in latex, but now I'm just confused about what is wrong in this formula. Can anybody help me with this? Thanks so much! ...
1
vote
1answer
52 views

Equation environment

I use texmaker program. I can not jump up to next line by using symbol \\ in equation environment: \begin{equation}....\end{equation} I could do it before but now I can't. In other environments, I ...
3
votes
3answers
105 views

Aligning a optimization equation

I was trying to write a optimization formula which has two part as objective and 2 constraints. But, the objective function is a little bigger and i want to see it in multiline not in single line. But ...
1
vote
2answers
66 views

How to properly align a set of very long equations [duplicate]

I do have a term and would like to show several steps of a derivation, just like here: \documentclass{IEEEtran} \usepackage{amsmath} \begin{document} \begin{align} thisIsATerm \\ &= ...
1
vote
4answers
94 views

Could I be able to left-align the following equations? (Please note that one of which is mult-lined)

\documentclass[11pt,a4paper]{article} \usepackage{blindtext} \usepackage{mathtools} \DeclareMathOperator{\sgn}{sgn} \begin{document} \begin{flalign*} &D= ...
5
votes
2answers
113 views

How may I align the equal signs of a multline equation and another equation that follows it?

\documentclass[11pt,a4paper]{article} \usepackage{blindtext} \usepackage{amsmath} \begin{document} \begin{multline*} \epsilon(r_1,...,r_n)\\= sgn\prod_{\substack{1 \leq i<j \leq ...
1
vote
1answer
81 views

Center-justifying first part of multline

Consider the following MWE. With my document setup, the equation has to be broken into two lines. Luckily I can get the entire matrix on one line, so I can break the equation after the equals sign. By ...
0
votes
0answers
19 views

how to make aligned equations in multline? [duplicate]

\begin{multline}\label{eq:bgbb2} <br> L(\alpha,\beta,\gamma\delta|x,t_x,n) = \int_{0}^{1}L(p,\theta|x,t_x,n)f(p|\alpha,\beta)f(\theta|\gamma,\delta)dpd\theta \\ ...
1
vote
2answers
173 views

sketching semicirles and horizontal lines

I want to sketch this parallel lines and semicircles between them sth like the attached figure... would you plz help me?
2
votes
2answers
147 views

Any way to check with a macro if an equation is too long to fit into a single line?

I have some very long equations which span a few lines. I'd like to Break lines automatically. Pagebreak. Have an equals sign both at the end of the first line and at the beginning of the second ...
2
votes
1answer
71 views

An embarrassing Multline error [duplicate]

Here I am, trying to display an equation that takes way too long for one line, so I called multline. \documentclass{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} ...
0
votes
2answers
49 views

sub-numeration using multlined

Hi I used multlined to produce this but I would like to get a sub-numeration for each 3 equations for example 1.a, 1.b 1.c with correspondent labels. here is the code \documentclass{article} ...
1
vote
2answers
87 views

Aligning equation including multiline expressions

I have a derivation and have problems getting it to look nice. The derivation goes over several lines, so I want the = signs aligned. That is easy either using align or eqnarray. However, one of the ...
4
votes
3answers
121 views

error with multline, but not equation

I am working with the first of 3 very long equations and am trying to get it where it will be relatively easy to read. However I get the following error ! Missing } inserted. <inserted text> ...
3
votes
1answer
229 views

Bracket problems when splitting multiline equations

Basically, I have the following latex code: \begin{align*} + \left( \left[ \sum_i y_i x_i(r) - \frac{1}{n}\sum_i y_i \sum_i x_i(r) \right] \left[ \sum_i x_i^2(r) - \frac{1}{n} \left( \sum_i ...
1
vote
2answers
133 views

big equation in flalign

I am trying to use a big equation inside flalign. The biggest chunk is the third line and I couldn't figure out how to something akin to \shoveright in this third equation, as I want is ending on the ...
0
votes
1answer
125 views

Multline & Splitfrac

\documentclass{article} \usepackage{amsmath} \usepackage{mathtools} \begin{document} \begin{multline*} -\dfrac{1}{64\pi^2} \left[ \dfrac{ \splitfrac{ ...
3
votes
1answer
226 views

Multlined in align enviromnent: alignment of = and equation numbering

I'm using the multlined environment inside an align environment and want have the = aligned at the top and the equation numbering at the bottom. Is this possible? Here my MWE: ...
3
votes
1answer
78 views

How can I adjust the position of multiple \vdots after multiple \begin{cases}?

Here's a MWE: \documentclass[12pt]{article} \usepackage{amsfonts, amsthm, amsmath, amssymb} %===== \begin{document} \begin{multline*} \\ % \text{Text} \begin{cases} AAA\\ AAA \end{cases}\\ % ...
2
votes
1answer
135 views

latex typesetting multiline alignment with flalign

I'm trying to align the second line equation below the integral in the first line. How do I go about doing that? I have used \right. commands to be able to move onto the next lines. I didn't have to ...
4
votes
1answer
140 views

multiline equation inside \newglossaryentry

I want a multiline equation (preferably even centered w.r.t. the appropriate column, since single line equations I already have using [ and ] or $$ $$ aren't centered) in part of the description of ...
4
votes
4answers
520 views

Are there any way to align this equation?

I have a long equation. I used multline and tried \documentclass[12pt,a4paper]{article} \usepackage[utf8]{inputenc} \usepackage{amsmath} \begin{document} \begin{multline*} ...
2
votes
1answer
115 views

tex4ht compile error using mathml switch using multline with pmatrix and easybmat

It took me a long time to find this and be able to make a MWE. I hope someone has an idea what is causing it and if there is a work around. This problem shows up in this small example, only when I use ...
3
votes
1answer
164 views

Get both advantage of multline ( spacing) AND equation/multlined (numbering)

I like the spacing of multline but not the numbering (on the last line). I tought for a moment that equation+multlined will do the trick but that is not the case right now. The numbering is OK, but ...
3
votes
1answer
99 views

Vertically aligned equation number with underbrace

I would like to vertically aling an equation number for the following MWE: \documentclass{scrartcl} \usepackage{amsmath} \usepackage{mathtools} \begin{document} \begin{align} \begin{aligned} a ...
4
votes
1answer
61 views

Error with pmatrix inside multline* inside minipage inside tabular

The following is a minimal example of code that gives me an Argument of \multline* has an extra } error. \documentclass{article} \usepackage{amsmath} \begin{document} \begin{tabular}{c} ...
2
votes
1answer
87 views

Split the equation into three lines because it is too long

How can I split the following equation that goes beyond the margin? \begin{align} f_4(s)=\\ \sum_{i=0}^{\Delta_1-1}{\frac{1}{i!}[(-s)^i \frac{\delta^i}{\delta(s)^i}(\exp(-s^{\frac{2}{\alpha}} ...
4
votes
2answers
140 views

Error in multline

This is related to my early question, but with some changes: \documentclass[11pt,twoside,a4paper]{article} \usepackage{amsmath} \usepackage{enumerate} \begin{document} \begin{multline} E(y_{i})= ...
5
votes
3answers
152 views

alignat inside align enviroment?

Why can't I nest an alignat environment in an align environment? \begin{equation} \label{eq:115} \left\{ \begin{aligned} \begin{alignat*}{2} ...
2
votes
2answers
1k views

Break Large Equation Between Parenthesis Using Multline

I have a very large equation that I need to write in multiple lines, but multiline is not working between parenthesis. This is my LaTeX code: \begin{multline} e^{-y \lambda_n} \left( ...
1
vote
3answers
114 views

How can I obtain brackets with proper size on multiple lines using the {multline} environment?

My code is of the form \begin{multline} \left[ \frac{foo}{bar} \\ foo \right] \end{multline} This code gives an error for missing \right. etc. To remedy this, I used this code \begin{multline} ...
6
votes
2answers
148 views

Punctuation after multiline math diagram

How to place the punctuation after multiline math diagram at the last line rather than the first line as the case showed in my following code. \documentclass{article} \usepackage[utf8]{inputenc} ...
1
vote
3answers
187 views

Error report in this equation [closed]

I get the "Missing } inserted \end{multline}" when I run the equation below, please someone help me please. \begin{multline} {G_1} = \frac{{{2^{m - 1}}(m - 1)!}}{{{{\left( ...
1
vote
1answer
218 views

Left and right subscripts in multline environment

I am using \documentclass[12pt]{article} \usepackage{amsmath} \begin{document} \begin{multline} \big_{1}[_{2}(...)_{2}\big]_{1}. \end{multline} \end{document} The lower suffix works only for right ...
7
votes
1answer
312 views

Tombstone misplaced with `multline*` and `\qedhere`

It looks like the end-of-proof symbol is misaligned if multline* and \qedhere are used. Or am I just using them wrong? \documentclass{article} \usepackage{amsthm,amsmath} \begin{document} ...
3
votes
1answer
98 views

Problem with using multline and align

I am LaTeX begginer and when I run this equation, I am getting the error: ! Argument \align* has an extra {. Here is the equation. \begin{multline} \begin{align*} C_s & = \displaystyle ...
5
votes
2answers
853 views

Aligned multline

I want to show the derivation of a formula where I encounter long formulae. Unfortunately the derivation is very complex, so I have to show some intermediate steps. My problem is, that I want to mix ...
6
votes
2answers
104 views

How to set some lines right aligned in the align enviroments?

I have try some code like this: \begin{align*} Q(R)&=\bi(R,R)\\ &=\bi(R_I+R_{\Rico}+R_W,R_I+R_{\Rico}+R_W)\\ &=\bi(R_I,R_I)+2\bi(R_I,R_{\Rico})+2\bi(R_I,R_W)\\ ...
7
votes
2answers
517 views

right align in align environment

I use a align* environment and on one line I have a very long equation which does not contain into a line. Thus for this line I would like to have the same behavior as a multline environment, that is ...
7
votes
2answers
3k views

Spacing of \multline inside align (i.e. \multlined)

Related with How can I use multline within an align environment?. Consider this document: \documentclass{minimal} \usepackage{amsmath,mathtools} \begin{document} \begin{align*} & ...
1
vote
0answers
278 views

\Needspace inside \multline [closed]

How to make \Needspace work inside \multline? \displaybreak would be ok, but it doesn't support arbitrary lengths. For example: \documentclass{article} \usepackage{amsmath} \usepackage{needspace} ...
7
votes
3answers
927 views

A vertically centered equation number on a multline environment

The multline environment does exactly what I want in splitting a long formula between lines by utilizing the horizontal space to the fullest. (I don't want the alignment features of the align ...
7
votes
4answers
3k views

How to align a system of multiline equations?

I've got a system of equations, each of them doesn't fit the page width, so I'm searching the way to align them so that: the brace should appear to the left with no indentation the first line of ...
12
votes
3answers
1k views

How do I obtain multline-type alignment within a group of equations?

I want to achieve something like the following (for now achieved using Microsoft Paint): That is, I want to group a number of multi-line equations within a single equation-type environment (i.e. ...
18
votes
6answers
5k views

Multiline equation with LHS alone on first line?

I would like my multiline equations to look like this: Left-hand-side of my equation = right-hand-side number 1 = right-hand-side number 2 = etc. I know there is a simple way to do ...
10
votes
2answers
322 views

multline inside an item

Is there a way to use a multline inside an \item element of enumerate WITHOUT a new line between the index of list and the formula? \begin{enumerate}[i.] \item $checkorder( ...
1
vote
0answers
180 views

multline and mdframed bug [closed]

I do not think this bug has been reported anywhere. At least, I could not find such a report. Below is a piece of code to see the problem. The frame in the right margin is improperly calculated. ...
0
votes
0answers
361 views

Multiline text under/over arrows [duplicate]

Possible Duplicate: How can I write multiple lines in a subscript? Force line break inside a \lim argument in align environment I want to write some multi-line text under a long arrow. ...
23
votes
1answer
5k views

Flexible equation, align, multline environment

I'm looking for a command (say \foo{}) or pair of commands (say \foos, \fooe) that behave like: equation environment if there is no \\ nor & multline if there is a single \\ align if there are ...
2
votes
2answers
4k views

How can I use multline within an align environment?

I've been looking around and I know that there are possibilities to mimic the multline environment within the gather or align environments, or by using multlined but not in a way that I like, I think. ...