{nodes} is about nodes in {diagrams}.

learn more… | top users | synonyms (1)

10
votes
2answers
4k views

Increase the bending distance of a ``to`` path in TikZ

I have problem with an small graph. The path between the node J and B should to the right of node I. Is there a way to do this? \documentclass[11pt]{article} \pagestyle{empty} \usepackage{tikz} \...
7
votes
1answer
3k views

Grouping nodes in tikz

For the MWE below: \documentclass[a4paper,11pt,twoside]{report} \usepackage[left=2.5cm,right=2cm,top=2cm,bottom=2cm]{geometry} \usepackage[T1]{fontenc} \usepackage{amsmath, graphicx, tikz, enumerate, ...
3
votes
1answer
552 views

Making figures (listings) be like tikz node/arrow transitions

I have the MWE as below: \documentclass[a4paper,11pt,twoside]{report} \usepackage[left=2.5cm,right=2cm,top=2cm,bottom=2cm]{geometry} \usepackage[T1]{fontenc} \usepackage{graphicx} \usepackage{...
6
votes
2answers
324 views

How to share selected options between different nodes in TikZ?

(I didn't find a better title for the question. Suggestions are welcomed.) I have created some new shapes in TikZ and I would like to put one of them below another one when a certain key is passed to ...
8
votes
2answers
331 views

multipart node to represent a byte

I am trying to create a multipart node to represent a byte I wish I could write \Byte{0 1 0 0 1 1 0 0} or \Byte {0, 1, 0, 0, 1, 1, 0, 0} and obtain \documentclass[12pt]{standalone} \usepackage{...
9
votes
1answer
937 views

How can I move the position of a label inside a node?

I just started using TikZ an it's amazing. But I can't find out how to change the position of the label inside a node. At the moment I've: \node (DataAccess) at (0,2) [draw,thick,minimum width=8cm,...
1
vote
0answers
44 views

pgfplots: How to change the alignment of one single node [duplicate]

Possible Duplicate: How to display labels on points of a tikz plot I plot a scatter plot using pgfplots and automatically label every single mark with its description. When two marks are too ...
6
votes
1answer
3k views

Circuitikz - IC circuit with relative coordinates

I've represented an IC circuit using circuitikz, but it's a bit too rough to what I prefer. In particular I would like to use relative coordinates in this case and connect them to the ``IC device'' so ...
8
votes
2answers
401 views

Align the length of two nodes inside a matrix

I wanted to create a node with vertical and horizontal parts. So after some searching I found that I can achieve this by using a matrix. I tried the code below: \documentclass{article} \usepackage{...
3
votes
1answer
975 views

Slight vertical mis-alignment of cells when using TikZ matrix of nodes

While laying out a bunch of nodes with a TikZ matrix, I noticed slight vertical mis-alignment of nodes. It seems that words with “tall” letters (p, b, l) shift the box vertically up or down. This does ...
3
votes
2answers
1k views

Using node shapes or self made tikzpicture as image in legend

I am using the solutions of Using a pgfplots-style legend in a plain-old tikzpicture and Legend in tikzpicture to create a legend in a tikzpicture. In this legend I need a cylinder as image. I ...
15
votes
2answers
3k views

How to make tikz multipart node parts have uniform size?

When making boxed nodes in TikZ, a common requirement is that the nodes be of equal size. Because TikZ automatically adjusts the size of nodes to fit the contents of the node, this is usually done by ...
18
votes
3answers
15k views

TikZ: Using Loop to Draw Grid of Nodes

I am trying to draw an Ising model (in my case, a grid of nodes with an undirected edge between adjacent nodes on the same row or column) using TikZ. I have the grid of nodes working nicely using a ...
22
votes
3answers
1k views

TikZ Nodes not exactly centered

In my solution to draw a plot with point, it was pointed out that the nodes containing \textbullet and $\circ$ were not placed exactly centered at the specified point. I found this hard to believe ...
7
votes
1answer
6k views

Tikz multiline node with center align [duplicate]

I have a problem with nodes in scheme. I need type a node where will be text "Banka melovskych filtru". Each word on a special line with center align.
1
vote
2answers
628 views

Draw a tree with variable node number

I would like to draw a tree in tex that is more like a sketch of a tree: It should contain variable node numbers. Important is, that the dots are contained in the tree drawn. Is that possible with ...
14
votes
2answers
2k views

Text over rectangular node

I am trying to create a new environment that will contain the following displayed counter (at least something like it): \documentclass[letterpaper]{article} \usepackage{amsmath,amssymb} \usepackage{...
7
votes
1answer
533 views

Custom TikZ node with svg path not clipped

I would like to make a custom node shape with a small picture (on north east) using the svg directive of TikZ, because the picture comes from a svg path. As you can see with this simple code, the ...
2
votes
2answers
964 views

How to join two arrows with (TikZ) [duplicate]

Possible Duplicate: Merge arrows with TikZ Is there a way to join two arrows? They should start from two different nodes, join and point to a third node. That would be great! here I have a ...
8
votes
2answers
1k views

Center a Node Vertically TikZ

I'm using TikZ to create the following drawing: So far so good, but now I'd like to center the node with the gray background vertically. Here's its code: \setlength{\arraycolsep}{2pt} \draw[xshift=...
5
votes
2answers
2k views

Set total width of TikZ node / Resize lrbox

I am currently preparing a poster for a conference and decided to use 'beamerposter' for that purpose. As I don't really like the standard templates I decided to go after a design similar to this one:...
18
votes
1answer
4k views

How to use “fit” to frame the nodes and labels

I'm using the fit TikZ library to fit a rectangle around two nodes which include labels. However, the rectangle is only fit around the actual nodes, not about their labels: \documentclass{article} \...
10
votes
4answers
1k views

How create circle node in Tikz with T from lines inside? T made split node to 3 sectors

I woud like create 3 sector circle node. See the following figure sectors are bounded by lines
15
votes
2answers
2k views

macro for empty nodes in tikz-qtree

I'm trying to define a macro for writing empty nodes in a binary tree using tikz-qtree. Referring to the code below, I want the string \missing in my code to be replaced by \edge[draw=none]; {} as-is (...
62
votes
5answers
79k views

TikZ set node label position more precisely

This seems like it should be really easy but I can't seem to find it anywhere... I'd like to be able to fine-tune the positioning of a node label. I'm aware of the \node[label=above/below/etc:{label}...
10
votes
3answers
894 views

parametric naming of nodes in Tikz

I would like to generate a graph with nodes and edges names by their coordinates in the graph, something like: \foreach \x in {0,1,...,6} \foreach \y in {1,...,4} \draw (1.5*\x,2.5*\y) circle (...
5
votes
1answer
784 views

multipart nodes anchors for dividers

How can a node be positioned at the center/edge of a part in a multipart node using relative positioning? \documentclass{article} \usepackage{tikz} \usetikzlibrary{shapes.multipart} \usetikzlibrary{...
5
votes
1answer
2k views

Gradient color on TikZ tree

Mindmap creates connection line composed of the parent/child colors. Is it possible to apply such effect on normal parent/child trees to connect the parent and child nodes with a gradient of their ...
14
votes
2answers
2k views

How to avoid covering nodes with connection lines

When drawing connection lines (edge) between nodes, the lines will be drawn over the nodes (due to the drawing sequence). If having many connections, it may problematically cover the nodes, and ...
6
votes
1answer
2k views

Custom sibling angle for child nodes

As I explored the TikZ manual and available examples; the position of child nodes are defined within the parent node. This means that all child nodes spread on the same radius from the parent with ...
10
votes
2answers
516 views

Why are just-created TikZ shapes “unknown”?

I'm using TikZ's \foreach iterator to create a series of nodes and then draw edges between them. First I iterate to create the nodes; then I iterate through the nodes to link them to each other. ...
3
votes
2answers
742 views

tikz positioning. How to place a node below of another only by y coordinate, leaving x alone

I have 2 chains in different columns of a table. I need to shift the second chain in a such way that the {mv r0 <- a} would be below the {br a = 0 $end}, as it is depicted : right below the red ...
2
votes
2answers
440 views

Declare the point for incomming arrows on nodes

is there a way to tell the a node, where the arrow shall arrive? At this example, the Arrow from Node B to A should arrive exactly in the middle of the "D" from "Dies". It should start on top-center ...
7
votes
1answer
2k views

Tikz - Nodes highlighting / background coloring

Here is the MWE, it works leaving the unicode devanagari text. \documentclass[fleqn,12pt,a4paper]{article} \usepackage{tikz} \usepackage{tabularx} \usepackage{color} \begin{document} \newcounter{...
10
votes
1answer
7k views

tikz nodes: centering with small font

I am trying to create tikz nodes with centered text, but changing fontsize. Unfortunately, while normally-sized text is nicely centered inside the nodes, the smaller text is not centered, but shifted ...
8
votes
1answer
1k views

Titles aligned horizontally above nodes in figure

I am trying to create a flow chart going left-right where each stage has a header aligned with it, at a certain height above the chart. I am trying to use the Hydrogen Splitting Example (see the ...
10
votes
2answers
3k views

How to position nodes around another node in TiKZ?

I'd like to position some nodes in TiKZ around a given node. I could do that manually, by setting each node position, but why not looking for an easier way that looks better? I thought about using a ...
8
votes
3answers
10k views

How to make nodes to simple dots instead of being named

I currently have the following code: \documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture}[scale=1] \tikzstyle{every node}=[draw,shape=circle] \path (0,0) node (p0) {$p_0$} (...
6
votes
1answer
2k views

How to change the shape of TikZ's mindmap children?

Consider the original example of tikz's mindmap. The standard shape of both parent and children is circle. The official document states the difference of TikZ's mindmap from standard mindmaps by using ...
6
votes
1answer
1k views

How to make a pgfplots stacked xbar plot with bar-“explicit meta” labels computed from input table data

I am making a pgfplots stacked xbar plot where each bar has a distinct label, in addition to a numeric bar length. Each pair of bars also has a common label. I would like to mark each bar with its ...
11
votes
1answer
819 views

Label automatically positioned so that it doesn't overlap anything

I produce automatically generated LaTeX-files with nodes and links. Is it possible to put the label of the node outside of the node and it is automatically positioned somewhere, such that there is no ...
5
votes
1answer
534 views

Shrinking text in a node, such that the minimum width and minimum height are the actual width and height of the node

I want to shrink the text in a node such that the minimum height and width are the actual width and height of the node. I found this Shrinking text to the width of a node within a tikzpicture, but I ...
3
votes
2answers
817 views

How to align rows in Tikz nodes & tabular environment

In the attached image, you can see the text is not aligning properly. At the end it started to align as required. Sorry I can not reduce the MWE any more. since the preamble in big so I will put ...
5
votes
1answer
794 views

Is it possible to refer to node label and reuse it for labeling other nodes in tikz?

I would like to "reuse" some nodes' labels, as in example below \documentclass[a4paper,12pt,oneside,titlepage]{report} \usepackage{tikz} \usetikzlibrary{positioning} \tikzset{ label node/...
7
votes
2answers
677 views

How to put environment text inside node?

Consider a simple environment in the documentclass as \newenvironment{abstract}{ \node (tbl) { }; } The content of \begin{abstract} Content \end{abstract} will goes ...
3
votes
1answer
2k views

tikz, tikz circuits, relative coordinates

I am trying to draw a dimensioned line, <---- 2 cm ---- > in the x, and y directions on a circuit diagram. Using absolute coordinates, there is no problem. However, the display is faulty using ...
3
votes
1answer
634 views

Name tikz circuit symbol node

Consider the following minimal example in with TikZ circuit library \documentclass{article} \usepackage{tikz} \usetikzlibrary{circuits.ee.IEC} \begin{document} \begin{tikzpicture} [circuit ee IEC,&...
25
votes
3answers
33k views

How to increase the horizontal distance between nodes?

I've got this Tikz picture and I'd like to increase the horizontal distance between the nodes while keeping the vertical distance unchanged. I know how to do it by placing the nodes manually using ...
4
votes
1answer
659 views

How to modify just some nodes' styles in chemfig

In the following molecular drawing, I want to only circle the rightmost OH of the first molecule and the leftmost H of the second, to show that they are the ones that are involved in the formation of ...
2
votes
2answers
822 views

TikZ – How to create nodes

Based on one of the example posted How to create new table environment, I modified to my needs, \documentclass{article} \makeatletter \usepackage[labelformat=empty]{caption} \usepackage{tikz} \...