{nodes} is about nodes in {diagrams}.

learn more… | top users | synonyms (1)

3
votes
2answers
518 views

Continuous node in flowchart using Tikz

How can I make the nodes connected without any block using Tikz? For example, I was trying to connect the arrows that returns to the do-loop when the decision making box (named as Condn) returns no. ...
5
votes
1answer
252 views

Multiple overlaid rectangles as TikZ node

I'm trying to create a TikZ flowchart where I need to differentiate between serial and parallel streams. Here's an example with serial to parallel: I've managed to create a multiple stack of ...
2
votes
0answers
138 views

TikZ node positioning on edge parameter/label [closed]

I wonder if there exists a trick to position a graph node (relative), based on a parameter (label?) of an edge leading to it? I mean a kind of time diagram, i.e. for example I have a timed automat, ...
1
vote
1answer
189 views

Drop shadow of node with pgfplot inside

I have this code: \documentclass[tikz]{standalone} \usepackage{pgfplots} \usetikzlibrary{shadows} \begin{document} \begin{tikzpicture} \node[drop shadow,draw,fill=green] { \begin{tikzpicture} ...
4
votes
2answers
323 views

How to reduce the space between nodes?

I want to make the nodes in the following vector-illustration touch each other. But no matter what I do to text width or node distance the distance between the nodes stays the same. ...
2
votes
1answer
125 views

TikZ nodepart enumeration

When I enumerate nodes I can write for example: \nodepart{sixteen}1 But I need to make nodes with numbers: twenty-one or more. How can I do that? When I write \nodepart{twenty-one}1 Latex ...
2
votes
1answer
153 views

Tikz How to?: Shear flow distribution around a box; Adding rectangles to lines

I am trying to illustrate the shear flow distribution around two similar boxes for my students using Tikz. The result should look like the two following examples: From a previous try, I already ...
1
vote
1answer
111 views

How do I store the x or y value of a named node in tikz \draw?

A big part of the question above has already been answered: "Use the calc tikzlibrary and the let syntax". \begin{tikzpicture} \draw [help lines] (0,0) grid (4,4); \node (A) at (2,1) {A}; ...
5
votes
1answer
213 views

Remember coordinate in nested tikzpicture points to a weird place

I have problems with remembering the coordinates of names defined in nested tikz pictures. Look at the following minimal working example: \documentclass{article} \usepackage{tikz-qtree} ...
5
votes
1answer
1k views

Adjust position of node label

In the MWE below, how can I get to adjust the position of the node labels? Note that the nodes are defined by dot/.style={circle,inner sep=1pt,fill,label={#1},name=#1} but I cannot figure out how ...
3
votes
1answer
173 views

Passing options to “append after command”?

With minimal tikz knowledge, I try to create a node like shape, which has two filled circles in it. Here is my attempt, which suffers from these problems: The appended path components seem to be ...
3
votes
0answers
99 views

How to automate right node alignment for labels from table AND marker size AND marker color of scatter plot?

Problem: Labels from table are placed right, but overlap. Is there a way to automate alignment of the labels near nodes so that labels do not overlap? This is a small example but I have bigger table ...
2
votes
1answer
95 views

How to place a node of a certain shape with one side on a line in TikZ

I would like to have an arrow shaped node to be positioned with its tail on the vertical axis of my reference frame. Here' were I got: \documentclass{article} \usepackage{tikz} ...
4
votes
0answers
23 views

How to divide circle multipart nodes in tikz [duplicate]

I would like to get multi part node with vertical line between lower nodepart. Something like this: My code: \documentclass{article} \usepackage{tikz} \usetikzlibrary{arrows} ...
2
votes
0answers
288 views

How should I read the current TikZ “label distance”?

I decided that I don't like the behaviour of the label functionality of TikZ. I want to get labels that are positioned using the anchor opposite the specified label angle. So for example if the label ...
8
votes
4answers
873 views

Tikz labels are shifted dependent on the letters size

General description of the intrinsic behavior The labels in a tikz picture are shifted (e.g. by above) exactly to the extreme of the letters in the labels, i.e. it takes the descender (see ...
3
votes
1answer
173 views

How to determine minimum width of rectangle with distance between two nodes

From similar questions and given examples about how to calculate distances between two points in the TikZ manual, I was not able to figure out how to extract from them a solution for my (probably ...
3
votes
2answers
445 views

line/ arrow to node with rounded corners [duplicate]

A line to/from a rounded corner ends at the position 'north east' and not at the line around the node. Is there a simple way to end the line/arrow at the drawn line around A? MWE: ...
7
votes
1answer
307 views

Automatic connection of text points in tikz-qtree

I have to draw pictures like the following a lot: I want to use tikz-qtree, since I have a lot of trees and this package simplifies things considerably. Right now I use the following code, since it ...
5
votes
1answer
1k views

Node distance “and” command not working [duplicate]

I am trying to build a flow chart using TikZ. I would like the horizontal and vertical spacing to be different. Thus, I am using node distance=2.5cm and 1cm. However, the second distance (1cm) is ...
0
votes
0answers
35 views

How to declare new path commands in TikZ? [duplicate]

The TikZ Manual, section 59.5 and some very good questions on this site explain how to declare new shapes for TikZ nodes with \pgfdeclareshape{myshape} ... to later use them with \node[shape=myshape] ...
4
votes
1answer
2k views

Centering text in TikZ tree node

I'd like to have my text inside TikZ tree nodes centered; below is my progress so far: \documentclass[10pt, a4paper]{article} \usepackage{tikz} \usetikzlibrary{arrows} \begin{document} \tikzset{ ...
1
vote
1answer
116 views

Tikz nodes moves after double building

I want to plot 4 graphs in one tikzpicture in a 2x2 grid, using groupplot. Also I want to put some arrows from nodes in the first three plots to nodes in the last one. To do this, I try to use ...
2
votes
2answers
236 views

Parametrized circle node with a cross symbol

I am trying to get that result: with a parametrized node that has 4 args for the 4 circle sections. I managed to achieve the following code: \documentclass{article} \usepackage{tikz} ...
4
votes
1answer
109 views

udots in TikzPic problem

I'm having a problem making a diagram in tikzpicture. Here's the code: \documentclass{article} \usepackage[utf8]{inputenc} \usepackage{amsmath} \usepackage{amssymb} \usepackage{MnSymbol} ...
8
votes
1answer
209 views

For each node I want to draw arrow '->'

I want to draw '->' for each path. Actually I tried to add every node option and '->', but this doesn't work. I know that \draw[->] (t1)--(t2); \draw[->] (t2)--(t3); ... would be work. But I want ...
0
votes
2answers
208 views

Horizontally aligning figures in tikz

I have produced two figures using TikZ that currently consume one full page(each taking up a half of the page). I want to scale these images and place them side by side horizontally so that I can save ...
4
votes
1answer
951 views

Drawing a circle around nodes in flow chart using Beamer

I am trying to draw a circle around a bunch of nodes in a flow chart that I've created using beamer and I can't figure out how to do it. Ideally, I'd like the circle to encompass most (but not all of ...
3
votes
1answer
519 views

TikZ: How to set a node on an exact position on a line?

to set a node on a line the usual way should be something like this: \begin{tikzpicture} % place nodes \node[draw] at (0, 0) (a) {A}; \node[draw] at (5, 0) (b) {B}; \node[draw] ...
5
votes
4answers
205 views

How can I make TikZ nodes center on a particular symbol/operator?

Here is a small example document. \documentclass[a4paper]{amsart} \usepackage{tikz} \newcommand{\dju}{\mathbin{\coprod}} \DeclareMathOperator{\id}{id} \begin{document} \begin{tikzpicture}[x = ...
5
votes
1answer
432 views

How to draw vertical brace right side of a vertical line with node?

I want to draw the following figure (with a node which is not shown). I obtained this with the following code: \begin{figure} \begin{center} $\left.\begin{array}{rr} \begin{tikzpicture} \draw ...
5
votes
1answer
423 views

How to connect two parents to the same child, with parents not in the same tree?

I'm trying to draw a specific tree, with two parents node linked to the same child. The problem is that one of the parent is outside the main tree. Here's the code I have for the moment: ...
7
votes
1answer
473 views

inserting special border to tikz mindmap

Hi I would like to mark certain nodes of tikz-mindmap just an example is illustrated in the figure. Thanks in advance The minimal working code is here \documentclass[]{article} \usepackage{tikz} ...
9
votes
4answers
599 views

Highlighting equation with arrow

I want to create an equation with highlighting as shown bellow. But using following code: \documentclass[10pt,a4paper]{article} \usepackage[utf8]{inputenc} \usepackage{amsmath} ...
4
votes
1answer
146 views

TikZ snake braces using nodes from diferent 'tikzpicture's

Is it possible to have a brace defined (with the snakes library) using as reference points 2 nodes in 2 different tikzpictures? \begin{tikzpicture}[scale=.6] \draw[draw=black, ...
2
votes
2answers
732 views

How do I place nodes around a circle in Tikz?

I'd like to place 17 evenly-spaced nodes around a circle. I am very new to Tikz and am following the Petri nets example in the manual. I would like to do something similar — essentially just ...
8
votes
2answers
549 views

How to draw a circle with a triangle in TikZ?

Be sorry that I cannot provide the coordinates of all points, or I can draw the picture. How can I make this figure? Thanks for any help!
5
votes
1answer
422 views

How can I create this kind of flow chart?

I am creating a beamer presentation. I try to create a tikz flow chart. Here is my production. T_T Actually, what I want to do is Be grateful with any help! So frustrated now. ...
3
votes
2answers
550 views

Using Tikz in a figure, can I draw braces between nodes and control spacing between brace ends and the nodes?

This question is related to Draw curly braces in TikZ. Is there a way of making the solution more general for when you wish to use node names to define the end points? To illustrate, I've made a ...
6
votes
1answer
599 views

How do I create a Tikz mindmap that has two connected roots?

I am creating a mindmap that has multiple root concepts instead of just one. How can I create such a mindmap using Tikz? These are the mindmaps: \begin{tikzpicture}[small mindmap,concept ...
5
votes
1answer
135 views

Make stealth horizontal in TikZ?

\documentclass[a4paper]{article} \usepackage{tikz} \usetikzlibrary{backgrounds, calc, positioning, fit} \begin{document} \begin{tikzpicture} \node[draw] (a) {A node}; ...
1
vote
0answers
135 views

Circuitikz: connection of nodes [duplicate]

I'm using the circuitikz library to draw some circuits. To connect two nodes with a square angle, there is the possibility to use |-, as in the MWE below for the connection of (a) with (b). However, ...
3
votes
1answer
111 views

How to eliminate the gap in a chain?

In the following code, I used node distance=0 and outer sep=0 to position the nodes besides each other seamlessly. \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{chains} ...
2
votes
1answer
77 views

Positioning \tstar… on a page

Horizontal positioning of \tstar can be done with \hspace*{}, but attempts at vertical positioning with either \vspace{} or writing \node (x) at (somex,somey) {\tstar{}{}{}{}} fails. How can I adjust ...
3
votes
0answers
487 views

TikZ scaling graphic and adjust node position and keep font size

I have several pictures in my thesis. I want to draw arrows with text over these pictures. After that I want to scale the picture, but the node position should adjust to the scaling and arrows, and ...
2
votes
1answer
276 views

How to use empheq environment in TikZ nodes?

Using the empheq environment from the empheq package in a TikZ node is throwing errors for me (although it seems to be plotted correctly): \documentclass{scrartcl} \usepackage{empheq} ...
3
votes
2answers
1k views

tikz tree fork down edge labels

\documentclass{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture}[level distance=1.5cm, level 1/.style={sibling distance=3.5cm}, level 2/.style={sibling ...
5
votes
2answers
243 views

How to converge various nodes with rectangular shapes and arrow in TikZ?

I'm very new to TikZ. I would like to join some nodes as shown in the attached image I've got some idea from this thread tree rectangular. However, I could not manage to implement this properly ...
8
votes
1answer
223 views

How to draw an overlaid pages image for a Tikz flowchart node?

In Natural Language Processing and related disciplines, it's common to see an "overlaid pages" image included as a node in a flowchart of a system: _____ | ___|__ | | ___|___ | | | | ...
8
votes
4answers
247 views

TikZ chain adjust positions of on-the-arrow node

\documentclass{article} \usepackage{tikz} \usetikzlibrary{chains} \begin{document} \begin{tikzpicture}[start chain=circle placed {at=(\tikzchaincount*30:1.5)},regular/.style={draw,circle,inner ...