{nodes} is about nodes in {diagrams}.

learn more… | top users | synonyms (1)

2
votes
2answers
35 views

Multiple outputs in node

I am trying to draw multiple outputs system with TiKz but I'm having several problems to get it right.I have searched for examples, but I could not find anything that looks like to what I want to draw....
2
votes
2answers
27 views

Using \hphantom within TikZ nodes

I'm trying to align the following piece of text: *Corresponding author Name Nameson name@mydomain.com such that the two lower lines are horizontally aligned with the C, rather than the * in the ...
7
votes
2answers
587 views

How do I format text inside a node?

I'm making an academic family tree and I'd like to put a couple of bullet points of info for each person. I'm just starting with LaTeX, so this is the simplest code possible: \documentclass[border=...
1
vote
1answer
36 views

Two tikz figures (with colored areas) next to each other

I would like place to figures/graphs next to each other. So far, I've managed to create the first figure and parts of the second figure. I don't know how to place them next to each other and how to ...
0
votes
0answers
58 views

Position of multiple arrows: Arrows must end at same position

I want to get two vertical sets of flowcharts and join their elements by arrows. MWE is given below. I want to draw two arrows from A1 and B1 to A2 with their heads meet at the same point. I tried ...
4
votes
1answer
79 views

TikZ-Drawing of Euler-cases (Knickfälle), bended lines

As a novice in TikZ I tried to draw the four so called Euler-cases (Knickfälle/Buckling; https://en.wikipedia.org/wiki/Buckling). I got that far: But it should rather look like this: As you can ...
0
votes
1answer
30 views

TikZ: remove side-bearing from text node

I want to horizontally align the first letter of a text node with a shape I've drawn. In my example, I want the F to be horizontally pixel-aligned with the left side of the square. The first step is ...
3
votes
2answers
47 views

Further extension needed for game tree (tikz)

I've started making a game tree, but I get stuck after the second level. Suggestions for extending to the desired output or cleaner code are much appreciated. Desired output Current output ...
3
votes
1answer
32 views

Independent control of node fontsize in pgfplot

I am making several figures in my paper using pgfplot. I want to independently change the fontsize of tick labels, axis labels, legend and some other notes/labels in the figure. Say, 8 pt for axis ...
2
votes
1answer
53 views

tikzpicture with 4 curves needs adjustment

I would like to replicate the image below (see "Desired output") because it's too murky + I would like to change the labels. I would appreciate any help that get's me closer to the goal. Current ...
6
votes
2answers
155 views

Latex TikZ: Node shape

I would like to change the shape of a node for a flow chart. Here is a code what I have so far: \documentclass{article} \usepackage{tikz} \usetikzlibrary{shapes.geometric, arrows} \begin{document} ...
1
vote
1answer
34 views

Tikz graphs, how to get radial edges connecting the centers of my nodes

I'm trying to get graphs looking like the following example: But all I can get is this: The problem is that the edges don't connect the centers of the nodes. On the white node on the top I tried ...
2
votes
2answers
39 views

tcolorbox disable repeated text in overlayed node

In the following MWE (built from http://tex.stackexchange.com/a/170767/69378) I have demonstrated that title text in an overlayed tcolorbox node gets repeated across page breaks. I have checked the ...
2
votes
1answer
206 views

Nicer inverse symbol

In my diagram, I would like the operator to be centred, i.e. not be influenced by the inverse symbol. And preferably a smaller minus sign, while we are messing up latex anyway. An excerpt of tikz ...
4
votes
3answers
130 views

How to stack TikZ nodes?

I want to have rectangular nodes exactly one above the other. I tried using fit and it seems to make the nodes larger than the input, so the nodes overlap. This is for something like a vertical ...
2
votes
0answers
21 views

Label in xbar stacked not shown

I'm using pgfplots 1.7. In the following plot the labels for the bars are not shown. \documentclass{article} \usepackage{pgfplots} %\usepackage{pgfplotstable} \pgfplotsset{compat=1.7} \begin{...
6
votes
2answers
4k views

pgfplots: relative node positioning in axis cs

I have got a file to plot with pgfplots. For convenience I'd like to define a measure in the plot. Unfortunately the relative positioning seems to give weird results. If I define the node coordinates ...
1
vote
0answers
59 views

Symbols at node in latex and their explanation

Let’s say, I draw a diagram like this % \usetikzlibrary{arrows} \begin{tikzpicture}[thick, scale = 0.8, line cap = round, line join = round,>=triangle 45, x = 1.0cm, y = 1.0cm] \coordinate (O) at (...
7
votes
2answers
153 views

How can I make a table with some lines superimposed?

I made the following table using PowerPoint and now I want to generate it using LuaLaTeX or XeLaTeX. I need to use the font Arial with size 10,5 pt. I find myself with several challenges: ...
3
votes
2answers
81 views

How to add a simple text through an arrow break between nodes in tikzicture?

I guess I need to define a different node style for this arrow break. \documentclass[border=3cm]{standalone} \usepackage{tikz} \usetikzlibrary{positioning,shapes,shadows,arrows} \begin{document} \...
2
votes
1answer
47 views

Is it possible to have more than one label for a tikz node and use arrows for connecting nodes to labels?

\documentclass[border=100pt]{standalone} \usepackage{tikz} \begin{document} \begin{tikzpicture} \node[circle, shading=ball, drop shadow, ball color=red!10!black, minimum width=4cm, color=white, ...
2
votes
0answers
14 views

TikZ: Problem with relative node positions for “big” nodes [duplicate]

I want to place two nodes besides each other, using TikZs right of= placement. But if the first node is two broad, like in the minimum example below, this does not work right. How can I make TikZ ...
3
votes
2answers
57 views

How to define a point for connecting nodes from two different tikz pictures?

I need to define a point on this page and connect several nodes from these two different tickzpicture figures. \documentclass{standalone} \usepackage{tikz} \usepackage{amsfonts, amsmath, amsthm, ...
1
vote
1answer
34 views

How to modify the shape, font and color of tikzpicture labels? Here, I need white color circular labels beside every node

\documentclass{standalone} \usepackage{tikz} \usepackage{amsfonts, amsmath, amsthm, amssymb} \usepackage[utf8]{inputenc} \usepackage{dtklogos} \usepackage{tikz} \usepackage{verbatim} \usetikzlibrary{...
5
votes
1answer
51 views

**Why** does cycle not return to the starting node **at all** if I construct a path between predefined nodes, rather than coordinates, in TikZ?

cycle doesn't work as I would naïvely expect it to if I use the node operation rather than coordinate to mark my points. I realise that, in the case of a node, TikZ is drawing to and from the borders ...
5
votes
2answers
80 views

How to pass a variable to the minimum size key in tikz

I want to pass a variable to the minimum size key of a node, but it doesn't work. Here is what I tried: \documentclass{article} \usepackage{tikz} \begin{document} \begin{tikzpicture} \...
3
votes
1answer
46 views

Positioning nodes and calculate edges coordinate

I am trying to draw a flowchart with tikz, but I have 2 problems. The first one is about the positioning of (action5). I want that node to be left (action4) and below (test1). In my code, the node is ...
4
votes
1answer
53 views

Referencing a node for use in postaction

The shortcomings of tikz trapezium shape have already been highlighted. I am looking for a parallelogram shape that strictly respects given angles and text width, while allowing for vertical ...
4
votes
0answers
35 views

Lines do not reach the border of node

I want to make a tikz-picture of a Hasse diagram and by problem is that the lines between nodes stop a bit short of the border of the node and I can't figure out how to fix this. Here is my code: \...
1
vote
0answers
50 views

x,y axis label values should be node label

I am new in tikz, I want to draw x,y axis and label of x,y axis should the node labels \documentclass{standalone} \usepackage{mathtools} \usepackage{pgfplots} \usepackage{siunitx} \sisetup{per-mode=...
1
vote
0answers
46 views

Where can I find the comprehensive list of TikZ node types?

Many TikZ examples use node types like "sum", "process", but I can't seem to find a list of "factory" node types in either the references or elsewhere on the web. What am I missing here?
4
votes
1answer
94 views

How to place two plots inside a node?

I'm eager to have two plots (of the algebraic functions) placed horizontally inside a node. I'd like them to be signed, so something like caption (below the plot) is needed. One of them — "the good ...
4
votes
1answer
57 views

Positioning TikZ block centrally above two child blocks

I have the following MWE of a Beamer slide: \documentclass{beamer} \usepackage{tikz} \usetikzlibrary{arrows,positioning,shapes,calc} \usetheme{Singapore} \begin{document} \begin{frame} \begin{...
4
votes
1answer
42 views

“append after command” in a tree (child path operation)

Related: Problem with "append after command" and "insert path", but I did not understand how to apply the solutions there in my case. I'm defining a simple tikz style which uses ...
4
votes
1answer
85 views

Draw nodes with tikz above each other

How can I draw nodes horizontally listed next to each other but with two nodes vertically listed as in the figure. MWE: \documentclass[border=10pt]{standalone} \usepackage{tikz} \usetikzlibrary{...
6
votes
1answer
91 views

How to rotate the box

How to rotate the box? How to change the above grid to the below shown grid I used this code to rotate \draw[step=1, red,thin,rotate=30] (-1cm,-1cm) grid (1cm,1cm); but i don't wan't to ...
2
votes
1answer
55 views

Remove upper part in an image

I am new in tikz, I didn't want the red boxed part in the below image, I am using the following code. How I change my code ? \documentclass{standalone} \usepackage{mathtools} \usepackage{pgfplots} \...
1
vote
0answers
42 views

How to rotate grid only / prevent the rotation of grid

I am beginner in tikz. I am using the following code so that the grid also rotating how I prevent the rotation of grid / how I rotate grid by 0 . \begin{scope} [xshift=15 ,yshift=0, rotate=30] \...
5
votes
2answers
152 views

cover part of a picture, defined by text

I would like to show a picture (in the example replaced by a red rectangle), but only parts of this picture should be visible, defined by a text. So, in this example only the part of the picture ...
1
vote
0answers
38 views

SOA Map based on Tikz

I would like to create a SOA Map based on Tikz or pgf. Basicaly this means a Matrix with realations from level to level, so that i could place my boxes in a easy way. I does not have to be as ...
11
votes
1answer
7k views

Draw a graph in Latex with Tikz

I am interested in outputting this graph in latex using tikz: So far I got this: and my tikz code is \begin{tikzpicture} \node[shape=circle,draw=black] (A) at (0,0) {A}; \node[shape=...
3
votes
1answer
51 views

How to use a \pic in a node's text area {}?

How can I achieve that the \pic "lightning" will appear in the node's text area? I cannot use it there, so I have commented it out. I know or think it's a completely different "environment" (a text ...
5
votes
3answers
89 views

Filling the space between two arcs between two nodes

I have the following code: \begin{pspicture}(-1,-1)(2,2) \psmatrix[rowsep=3cm,colsep=3cm,mnode=circle] [name=A]A & [name=B]B \endpsmatrix \ncarc[arcangle=30]{A}{B} \naput{4} \ncarc[liftpen=2,...
3
votes
1answer
30 views

How to increase background color of a node to input text

Obviously I need a background color for the rightsided text. Code is from the Tantau manual, p.45. It's a riddle for me at the time. Something wrong with the node which keeps the text? For any answer ...
2
votes
2answers
94 views

Condensation of Digraphs in Tikz?

How can I create a condensation of a directed graph in Tikz? Goal 1 The left is a directed graph, digraph, while the right is its condensation, source is page 183 of Handbook of Graph Theory. ...
1
vote
0answers
55 views

How to write colon in the name of a node

I want to have have ":" in the name of one node but my compiler hanged when I put ":" there. I mean the following code in okay \begin{tikzpicture} \node[] at (5.1,-1) {$Z_t^{1 N}$}; \end{tikzpicture}...
8
votes
1answer
112 views

Nodes midway sloped - how?

I have the picture, MWE \documentclass[border=10pt]{standalone} \usepackage{tikz} \begin{document} \begin{tikzpicture}[domain=-1.5:3,scale=0.8] \draw[gray!50, thin, step=0.5] (-3,-2) grid (10,6.5); \...
1
vote
1answer
42 views

tikz multi corners arrow looping around diagram

I'm trying to use tikz to draw algorithm diagrams. Assuming we have nodes A, B and C linked by arrows like so: A-->B-->C How to make an arrow that goes from the bottom of C to the top of A by going ...
4
votes
1answer
53 views

Add additional anchor to existing TikZ shape and modify existing anchor

I have the following code, which should give me a NAND gate: \tikzset{ block rect/.style = { draw = \linecolor, fill = \blockcolor, rectangle, minimum height = 1.6\blocksize, ...
3
votes
2answers
83 views

How to align tikz node text vertically centered and horizontally left

Assume a tikzpicture consisting of three nodes with node text. \documentclass[border=5mm]{standalone} \usepackage[latin1]{inputenc} \usepackage{tikz} \usetikzlibrary{calc, shapes, fit, positioning} \...