{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.

learn more… | top users | synonyms

1
vote
0answers
58 views

Numbering equations with (B.1), (B.2)

How to create numbering in this way: (A), (B), (B.1), (B.2) etc. with \enumerate ? Thanks for any advice. (edited in from comment:) \begin{subequations} \renewcommand{\theequation}{\...
0
votes
0answers
16 views

Unnumbered chapter in the table of contents [duplicate]

I have two unnumbered chapters: Introduction and Conclusion, using \chapter*{title}. I'd like that would be shown in the table of contents. Is there a way to do that?
0
votes
0answers
50 views

How to format long numbers correctly? [duplicate]

I'm writing my master thesis and I have some trouble formatting larger (longer) numbers. Let's say I have a number (in a mathematical equation or in text): 10456 Should I use 10'456 or 10,456 or 10....
8
votes
2answers
374 views

How can I make a “fake” subsection number?

I'm writing a LaTeX document which includes examples of how to structure another LaTeX document. However, I can't figure out a way to make it so that there's a subsection in the example that is a) not ...
3
votes
2answers
53 views

tcolorbox: theorem numbering in the margin is too close to text

I'm using tcolorbox to draw boxes around my theorems. This package also has the option of puting the theorem numbers in the margin as you can see in my MWE below; see page 342 of the manual for more ...
4
votes
1answer
31 views

Number listings the same way as figures and tables

For numbering figures and tables with 1 depth level like this: Figure 1.2 Table 3.13 I use the package: \usepackage{chngcntr} \counterwithin{figure}{section} \counterwithin{table}{section} \...
2
votes
3answers
31 views

add prefix to toc numbering

I add a prefix to the page number of my appdix by \documentclass[a4paper,oneside]{memoir} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \copypagestyle{apx}{plain} \makeevenfoot{apx}{}{...
2
votes
2answers
44 views

Aligning labels inside cases environment

I have the following code, where I have multiple cases and all need to be labelled. I tried using subnumcases, however I wanted some freedom in labelling (the $k^{th}$ case must be labelled C.k etc), ...
1
vote
1answer
16 views

How to show substeps in an algorithm environment

I would like to automatically show substeps such as 1.1. However, I can only do this manually. \begin{algorithm} \SetKwInOut{Input}{Input} \SetKwInOut{Output}{Output} Precomputation of ...
4
votes
1answer
82 views

Resetting chapter counter to 0 for each new part in the book document class

For reasons that may look misguided to some, there are cases where I would like to structure a documentclass{book} into parts and number the chapters of each part starting with 1. This works fine as ...
4
votes
1answer
59 views

How to control the depth of \localtablecontents in etoc

Is there a way to control the depth of what is shown by \localtablecontents, similarly to how \setcounter{parttocdepth}{.} and \setcounter{minitocdepth}{.} control the depth in the minitoc package. ...
1
vote
2answers
46 views

Appendices indented as multilevels in table of contents

I am doing my appendices with \appendix \section*{Appendices} \addcontentsline{toc}{section}{Appendices} \renewcommand{\thesubsection}{\Alph{subsection}} \subsection{Code} ... so the Appendices ...
0
votes
1answer
22 views

Correct numbering of figures/tables/listings in Appendix

In my thesis I have several appendices, which are defined via \section{First Appendix}, \section{Second Appendix}, etc. latex statements. The appendices have the following titles (hence, appear like ...
1
vote
1answer
24 views

Listings numbering in Appendix

Currently, I have an issue that in my thesis the numbering of listings in the appendix is not as desired. I currently only get Listing 1 as the numbering of the first listing in the first Appendix, ...
2
votes
1answer
42 views

Easy way to sectioning with a leading zero [duplicate]

There is a easy way to modify only this command \renewcommand\thesection{\arabic{section}.} in order to have an arabic counter with just one leading zero instead the original arabic without ...
1
vote
1answer
27 views

Make proof reference automatically bind to theorem proven or label proofs in ascending order

I was wondering if there's a way to make every proof automatically reference the latest theorem used in my text, or, alternatively, have proofs be labeled with ascending numbers. Allow me to ...
2
votes
1answer
28 views

addtotoc without a number

I am trying to use addtotoc key-value in order to make a PDF page appear as a chapter in my Table of Contents. Ex: \includepdf[pages=-, pagecommand={\thispagestyle{empty}}, scale=1.008, addtotoc={1,...
2
votes
1answer
63 views

Numbers before parts and chapters in the table of contents

When I use \tableofcontents* for adding a table of contents, Roman numbers appear before the name of a part (entered by \part) and English numbers is appear before chapters (entered by \chapter). How ...
4
votes
1answer
267 views

How do I precede a chapter number with 0?

I'm using the memoir class to typeset a novel. I have formatted the chapter display as below. The chapter numbers are displayed as '1', '2', '3', etc. How do I pad the chapter numbers less than 10, ...
7
votes
3answers
376 views

How to insert an extra footnote without changing the previous numbering?

LaTeX is very good in adjusting the numbering -- and more importantly the references to it -- when inserting new chapters, sections, etc. Legal documents (and books), at least here in Germany, tend ...
4
votes
2answers
44 views

how to place the equation number in the right

I wrote the equations and I manage to align the regression, but the numbers are showing below the regression. How can I align it in the right? this is the code I'm using: \begin{equation} \label{...
4
votes
2answers
74 views

How do you start a section with 0.0?

How would I go about adding the "A short preface" section? I know \section*{0.0 A Short Preface} would probably be fine, but TeX is awesome and there has to be a better way. This is sort of what I'm ...
4
votes
2answers
49 views

Automatic label formulas with (*) and (**) instead of numbers

As in the title, I would like to label formulas in certain environments (such as proofs) using (*), (**), ... instead of numbering. Is there a way to achieve this?
3
votes
2answers
77 views

How to customize the \label{}

I would like to change the presentation of the command \label{}. More precisely for the theorems of ntheorem. In fact I created a theorem called "assumption", and I would like to refer an assumption ...
2
votes
1answer
32 views

Block of equations with only some being subequations

I'm trying to make a block of equations where the first two are standalone equations, and the second two are subequations, ie X=XXXX (1) X=XXXX (2) X=XXXX (3a) =XXXX (3b) I'm using the amsmath ...
2
votes
1answer
31 views

Number theorems with subsections: “Theorem 1.2.3.4”

I would like my numbering of theorems to be like "Theorem 1.2.3.4" where 1 is the chapter, 2 is the section, 3 is the subsection, and 4 refers to the fourth theorem in this subsection. A solution is ...
3
votes
3answers
63 views

Discontinuous numbering when numbering figures by chapter: 2.1 followed by 2.3? [duplicate]

I am trying to find out how latex decides how to number figures when numbering is done by chapters. My problem is that the numbering of figures within the same chapter is discontinuous, e.g. after ...
2
votes
1answer
20 views

Figure number is incrementing by 2 if subfigure is used

\documentclass{svmult} % choose options for [] as required from the list % in the Reference Guide, Sect. 2.2 \usepackage{makeidx} % allows index generation \usepackage{graphicx} % ...
2
votes
2answers
50 views

Moving number labelling on forest linguistics diagrams

I'm using the forest package for some linguistics diagrams at the moment and I need to number them. However, the label for the numbering is aligned with the bottom of the digram when I want to have it ...
3
votes
1answer
33 views

Number chapter disappeared

I have no idea what happend. I had to reset TexStudio because it didn't show me the preview. Now there isn't chapter's numbers. Before I had: Chapter 1, Chapter 2 etc. with its title. Now there's only ...
4
votes
1answer
51 views

Numbering a multiline environment

How can i number a multiline environment (such as array rather than equation) so that the numbering is placed bottom right? this is the part of the code in document which would give result as on the ...
2
votes
2answers
34 views

How to achieve custom paragraph (or in general section) numbering and allow references?

I used the command getcurrentref from this question/answer to achieve a custom numbering when \paragraph is used. I wrapped it into the macro: \newcommand\mybook[1]{\paragraph{B \getcurrentref{...
3
votes
1answer
23 views

Forcing latin alphabet as a footnote mark

in a multilingual document (greek and english) i want to change the footnote mark from arabic numbers to the latin alphabet. here is how i try to do it,but when i compile it with xelatex i get the ...
1
vote
0answers
33 views

Latex, Table of Contents [closed]

I wrote out my table of contents as follows: \begin{document} \pagestyle{fancy} % The page style headers have been "empty" all this time, now use the "fancy" headers as defined before to bring them ...
0
votes
0answers
20 views

No numbers with titlesec and [hang] [duplicate]

If I use the [hang] format of the titlesec package (using a quite recent version of titlesec, namely 2016/03/15 v2.10.1, and TeX Live 2015), the section is not numbered. It seems that the [hang] ...
0
votes
1answer
46 views

How to place the illustration on the page in two columns and number them?

How to place the illustration on the page in two columns and number them? and another question. How to insert an image height of 30 % of the height of the text. Thank you.
1
vote
1answer
46 views

How to force a special numbering with literals for a specific equation

As in How to force a special numbering for a specific equation I want to introduce a set of chemical reactions (see code below) within a text containing some standard equations. Standard equations ...
3
votes
1answer
16 views

changing numbering depth in certain subsection

I have a document with several sections, most of which contain subsections. In all but one of the sections, I want the theorem numbering to go by section depth. In one particular section, I want the ...
1
vote
0answers
28 views

Package perpage.sty version 2.0 does not behave as earlier version did, and the specs seem to suggest [closed]

I have used this package for a long time, in its 2002 incarnation. The only use was to renumber equations each page from one. Referring to equations was done by prepending the page number. This was ...
6
votes
2answers
51 views

Right alignment of equation numbers in quotation

I use a quotation environment to make axioms or assumptions stand out from other text. But the equation numbers then end up at the right margin for the quotation environment, not the right margin of ...
3
votes
1answer
49 views

Showing “Appendix A with appendix title” and not chapter 1

I'm writing an article and I want to show just the chapter titles at the beginning of them. The problem is with the appendix, since now I'd like to show "Appendix A". My main.tex is \documentclass[...
1
vote
0answers
45 views

How to switch page numbering from roman numerals to arabic numerals [closed]

If a document does not have chapters but only sections, how does one set up "Introduction" with roman numerals and the body text with arabic numerals?
4
votes
1answer
36 views

Any way to achieve label format “Table X-X” in memoir WITHOUT using caption package?

In standard book class, it is very easy to achieve the caption counter as the form of "Table 3-4" where "3" is the counter value of \thechapter and the "4" is the order of apperance of this particular ...
2
votes
2answers
23 views

Long equation tag/number gets shifted to left hand side, rather than underneath right hand side

So i have an equation which is pretty much the width of my text. The equation number usually (when using pdflatex) shifts below the right hand side of the equation. However, i am now having to ...
3
votes
1answer
38 views

Sections with number ranges

I've been working on an assignment, and two of the questions are very similar and it's easier to write about them both in the same section. The problem with this is it screws the numbering up: 1 ...
1
vote
2answers
39 views

Numbering commutative diagrams

Is there a nice way to number commutative diagrams (like equations) ? When using tikz-cd I put a figure environment around it, and then there is no number anywhere. I can also use \begin{align} \...
2
votes
1answer
65 views

Suppress unused equation number but keep counting

I would like to suppress equation numbers for unlabeled (or better, unreferenced) equations but keep the equation count going. I am using the align environment throughout. Imagine \mathtoolsset{...
1
vote
2answers
53 views

Remove chapter from ToC without losing the numbering in the document

I'm trying to remove a chapter in the ToC to instead replace it with a custom text. A easy way is do like this: \chapter*{Chapter} \addcontentsline{toc}{chapter}{Custom chapter name} But this ...
7
votes
1answer
137 views

How can I change the labelling of an equation?

How can I change the labelling of an equation? Instead of (1.1), (1.2) I want to have (Equation 1.1), (Equation 1.2), ... Document class is scrbook. I use the following related packages: \...
1
vote
1answer
26 views

Theorem Numbering problem - Lettered subsections

I am trying to write theorems that will number based on section and subsection. I know this is the default when you enter, for example: \newtheorem{defn}{Definition}[subsection] but when I do ...