5
votes
1answer
31 views

Split the reference counter for any numbered item (like with subequations)

Not sure how to otherwise formulate this: in the MWE below, I can use {subequations} from amsmath, so I get two equations with the same equation number, and "a" and "b" added instead - and I can refer ...
0
votes
1answer
33 views

LaTeX is truncating my theorem reference numbers. How do I correct this?

I will have a Theorem, Lemma or Corollary and it will be numbered, say for example, 2.2.3 ... Unfortunately, every reference back to ANY Theorem, Lemma or Corollary simply state 2.2 ... It seems to be ...
3
votes
2answers
92 views

How to number subequations separately from the main equation?

I would like to produce in report class the following style for numbering subequations: The main equation has its own number, and can be referenced. Each subequations are labelled with lower case ...
13
votes
1answer
123 views

“\thechapter” as prefixnumbers for bibliography with biblatex

I have a huge document and would like to do the following with biblatex: Have one (actually, several) seperate bibliography for each chapter. Add a prefix to each citation number to make them ...
6
votes
2answers
90 views

Getting the number of a chapter-numbered theorem but without the chapter number

Suppose in Chapter 3 I have Theorem 3.17. I need to get the "17", NOT the "3.17" which would readily be obtained using \label then \ref. How do i do that? Edit: (Probably a more relaxing condition): ...
7
votes
1answer
117 views

How can I reference an (unnumbered) list item?

I have the following code: \documentclass[]{article} \begin{document} \begin{itemize} \item first item \label{first} \item second item \end{itemize} In \ref{first} we find the first item. ...
9
votes
1answer
158 views

Remove numbering of unreferenced theorems

Can theorems, lemmas, etc., be automatically displayed without numbers if not referenced (like \mathtoolsset{showonlyrefs} for equation tags)?
7
votes
2answers
68 views

Reference-able custom section numbering

I am writing some lecture notes from a class that I have on Monday, Wednesday, and Friday. What I would like to do is organize them by sections defined by the week and the day, e.g. 1M, 1W, 1F, 2M, ...
5
votes
1answer
64 views

Need labels and refs in longtable rows [duplicate]

In a longtable, I need the first column to display numbers based on an enumeration by references to labels. This means I can refer to the rows somewhere else in the text. I imagined it would help to ...
7
votes
2answers
98 views

Cross-reference to the next section, whatever it is

Some sections of my document start with a remark such as the following: "This section may be omitted at the first reading." I'd like to add to this text a (hypertext) reference to the next section ...
6
votes
1answer
113 views

How to create two series of the style of equation number in the same document?

I need two styles in my document: one for most equations, using the default style of equation-number; the other one for the left ones whose amount will not be lager than 10, using a new style (shown ...
0
votes
0answers
41 views

Choosing what to \ref from a \newcommand

I have this definition in my class (thanks to this answer): \newcommand\clause{% \immediate\write\@auxout{\string\expandafter\gdef\noexpand\csname ...
3
votes
1answer
210 views

Customizing Equation-Numbering / Labeling in IEEEeqnarray

I'm trying to label a set of functions as a specific number (9.125), like how equations are usually labeled with \begin{equation} or \begin{IEEEeqnarray}. I have been using \tag{} (with a customized ...
3
votes
1answer
237 views

Subequation number not shown (empheq+amsart)

This is a Follow-up question to Number equations within array In the original post I was asking about the basics of subnumbering equations and I got satisfactory answers so I could implement the ...
4
votes
1answer
92 views

Greek variable numbering and reference on it

I would like to define a command similar to \section that places Greek letters in the right order in an equation. Furthermore I want the option to label a Greek letter to use it later and I would like ...
3
votes
2answers
192 views

Number equations within array

I want to number sub-items of an array I have in order to refer to the right equation and not to the set of equations (SEE the pictures attached): Figure that should call 1.35a, 1.35b, 135.c, 1.36a, ...
8
votes
1answer
109 views

Changing Figure Numbering depending on how many occur in an \item

While trying to typeset examination papers in LaTeX, I've become the victim of shifting figure numbering standards laid down by my institution. The old way required figures to be numbered like this: ...
3
votes
1answer
74 views

subfig reference layout

I have the following working example \documentclass{article} \usepackage[subrefformat=parens,labelformat=parens]{subfig} \begin{document} \textbf{Error} This should say Fig. 1\textbf{a}, not ...
1
vote
0answers
136 views

All \ref{} to an equation refer to the section, not to the labeled equation [closed]

I am writing a document in LaTeX using TeXShop on OS X Mavericks. My .tex file looks like this: \documentclass[11pt,titlepage]{article} ...
3
votes
1answer
75 views

Update references and labels of equations after changing the order

This seems again trivial, but I cannot find any solution to my problem in the questions that have been asked on referencing. The issue can be explained easily: I am making a document with many ...
2
votes
0answers
74 views

Equation cross references problem [duplicate]

I'm using the code below to get my equations numbered as (1a), (1b), (1c), (1d) and (1e). \begin{subequations} \begin{align} a+b=c\label{eq1a}\\ b+c=d\label{eq1b}\\ c+d=e\label{eq1c}\\ ...
3
votes
1answer
61 views

Referencing of subfigures is wrong

After Ludovic C. solved my last problem Continous subfigure numbering I have another problem relating to the numbering of subfigures. When I reference a picture with the number (1) like this ...
1
vote
1answer
105 views

Problems with labels inside a floating with a table

I have this strange problem with the labels inside the floating that contains a table. For my first table I put the label inside the floating area, then I added the cross reference somewhere in the ...
2
votes
0answers
33 views

References numbering [duplicate]

Latex is numbering my references from the very document beginning including the List of Figures. As a consequence, the first reference to be cited (in the introduction) is already number 5. How ...
1
vote
0answers
25 views

Problem with Chapters in appendix mode not having a label [duplicate]

I have a main file where I include several chapters including a couple of appendices, like this: \usepackage{appendix} \begin{document} ... \include{chapter1} \include{chapter2} ... ...
0
votes
1answer
392 views

figure numbering (via `\ref{fig-label-name}`) when using user defined `myCaption`

I want to change the font of Figure, and the caption text. I tried caption package. But \usepackage[labelfont=bf,font=it]{caption} raises an error Command \caption@ContinuedFloat already defined.. ...
4
votes
1answer
292 views

Remove blank page between Acknowledgements and Table of Contents?

I get a blank page between “Acknowledgement” and “Table of contents”. How can I remove it? I used a template from somewhere. The preamble is as follows: \documentclass[openany,12pt]{ubthesis} ...
11
votes
1answer
183 views

Strip section number from equation range reference

I am trying to adjust equation range numbering from (1.10)-(1.15) to (1.10-15). By calling this in the preamble: \crefrangelabelformat{equation}{(#3#1#4-#5#2#6)} and then this in the document: ...
3
votes
2answers
100 views

Reference entire title of a Theorem, not just its number

Say I have \begin{theorem}\label{thm:Fermat} This is a theorem about Fermat. \end{theorem} and the output is Theorem 5.2. This is a theorem about Fermat. Now I want to reference it by ...
3
votes
1answer
82 views

Repeat a previously labelled equation without changing the label

Somewhere in my document I have some equation: \begin{equation} \label{some_equation} ... \end{equation} I would like to repeat this equation later (so that the reader does not have to flip ...
5
votes
2answers
137 views

`xr` - temporarily redefine `\label` for exporting section counter to sister document?

The goal My objective is to have continuous page (and possibly section) counters for several independent documents. The purpose is a cumulative dissertation where each paper should retain the ...
3
votes
1answer
66 views

Help with cross-referencing and altered numbering schemes

I've recently written a book and I now need to produce two companion volumes -- (1) a set of per-chapter 'appendices', consisting of material that expands on the stuff in each chapter, and (2) a ...
9
votes
1answer
2k views

\nameref — How to display section name AND its number

Is it possible to make \nameref display not only the title of the section but also its number? \section{First Section} \label{sec:some_sec} \subsection*{Unnumbered subsection} \label{sec:subsec} ...
4
votes
1answer
403 views

Customizing enumerate item label

I have a list that looks like follows: 1 (a) Red Apple (b) Blue Apple 2 (a) Red Orange (b) Blue Orange I want to say "(a) implies (b)." So I label items as follows: \begin{enumerate} \item ...
4
votes
1answer
96 views

Hidden subsection 0

I'd like to have an intro to a section 3 that would be referenced in the text as section 3.0. It should be a hidden subsection (before the first real subsection) that doesn't have a section header nor ...
9
votes
1answer
84 views

How do I make an exact copy of a table, but keep its number for referencing?

I have a table, and I want to print it twice in my document. I want them to have the same label, caption and number, so that in the caption when it says "Table 1: foo" the same number shows up, and so ...
6
votes
1answer
83 views

How to refer to the number of an item in an enumerate environment inside a theorem

I have something that looks like this: \usepackage{amsmath} \begin{document} \begin{thm} The following are true: \begin{enumerate} \item \label{foo} Foo \item \label{bar} Bar \item \label{baz} Baz ...
3
votes
1answer
149 views

Labels do not increment

In my document, I have a lot of short case studies, which I would like to number, just like figures. So I am using this: \subsubsection{Case study \ref{cs:this}: Title} \begin{figure} \label{cs:this} ...
7
votes
1answer
232 views

Highlight referenced equation number

I have to give a talk, and I am using a LaTeX paper that I will write onto the blackboard. However, it is quite annoying to write all equation numbers on the blackboard, but I do want to have them all ...
3
votes
0answers
81 views

Is it possible to reprint an equation without actually rewriting it? [duplicate]

I have an equation like: \begin{equation} \label{whatever} x+y=1 \end{equation} I want to write it again, keeping the same number. I know I could do the following: \begin{equation} x+y=1 ...
4
votes
1answer
113 views

Trouble with cross referencing in the appendices

I'm trying to get the figures and labels in my appendices to have the same format as the rest of the document. In my main thesis.tex file I use: \backmatter % book mode only \appendix ...
4
votes
1answer
544 views

How do I reference in appendix a theorem given in the body?

I have a theorem given in the body text of a paper, say Theorem 2 with label {theorem-abc}. I would like to provide the proof of this theorem in the appendix. 1) How do I cross-reference this theorem ...
0
votes
0answers
35 views

LaTeX numbering one figure incorrectly (Figure 2 instead of Figure 2.1) [duplicate]

All of my figures seem to be referencing correctly except for one. I have Text text text \ref{fig:label}. \begin{figure} \begin{center} <TikZ Drawing> \end{center} ...
1
vote
1answer
174 views

Alternative numbering for theorem

I am using thmtools as a front end to amsthm and I have a definition environment as follows. \declaretheorem[ style=mydefinitionstyle, name=Definition, numberwithin=chapter ]{definition} ...
4
votes
1answer
116 views

References numbers

I'm writing a document with the class amsbook. I have several chapters, and inside the sections only (no subsections). I've used \swapnumbers \theoremstyle{theorem} ...
7
votes
1answer
331 views

Numbering of subsections and paragraphs

I have a document style for a report which I'm having to copy to LaTeX format. I'm using pdfLaTeX, for information. In essence, the system is that paragraphs are on the same level as subsections, ...
4
votes
1answer
314 views

Cross-refencing a custom counter in \Alph style?

I made a 'hypothesis' custom counter in order to let LaTeX handle my hypothesis reference. My code is \newcounter{hypothese} \refstepcounter{hypothese}\label{hypo:lenght_of_words} ...
5
votes
1answer
112 views

How can I add a section reference to equation labels in an unnumbered section?

I have an unnumered section in a document, defining notation for the further contents. Since it's unnumbered, the equations within are labelled: '(1)', etc. For example: \documentclass[12pt]{book} ...
3
votes
1answer
169 views

How to create a numbered list of references when using verbose-trad1 style with the biblatex package?

I am using the biblatex package in the verbose-trad1 style. When generating a bibliography at the end of my chapter, all references are listed in alphabetical author, but they are NOT numbered. Is ...
1
vote
1answer
264 views

Get rid of the word “equation” in cross references

I'm using the thesis template that comes with LyX and whenever I make a cross reference for an equation it comes along with the word "Equation XX.YY" and I just want the number "XX.YY". The document ...