4
votes
1answer
23 views

Issues with unnumbered headers

I am trying to create a subsection header without a number and without this header showing up in the TOC. So using a '*' should do the job as follows: `\section*{My unnumbered header}` However, ...
3
votes
1answer
34 views

change the numbering in Beamer's table of content

Beamer's table of contents starts with bullet 1. How can I change that to bullet 0? The command \setcounter{section}{-1} in the preamble does not help.
2
votes
1answer
68 views

Table of Contents in Latex Book

I'm writing a thesis using \documentclass[11pt,a4paper,book,twosides]{now-book} When I generate the table of contents, it results something like this: Chapter 1 (chapter name) 1 (section ...
2
votes
1answer
71 views

change numbering in table of content for Beamer

I want to use roman number for section and bullet for subsection in TOC for Beamer as shown in this figure:
4
votes
1answer
35 views

Fix spacing from sections in toc, and part title

I've got to fix a friend's work that was done with latex. I've got almost all done, but there are a couple of issues that I couldn't fix, so I would like if you can help me please (an article ...
2
votes
1answer
56 views

How to change bullets to basic numbers in each tier of Beamer table of contents?

I would like to have Beamer table of contents like this: item 1.1. item 1.2. item item 2.1. item 2.2. item It is partially similar like this: Remove the bullets in Beamer's table of ...
4
votes
2answers
111 views

Show Chapter and Page Number in List Of Figures

I am creating a document framework for my mini-dissertation. The document will consist of multiple chapters. In each chapter the page numbering will start at 1. This is achieved by using ...
2
votes
1answer
79 views

Customizing table of contents numbering completely

I have to build a document structure with the different sectioning-levels (and therefor also the table of contents) having a certain, custom "numbering" instead of the default mathematical. E.g. a ...
4
votes
2answers
94 views

Numbering the table of contents

I'm new to latex. I have successfully formatted the chapter heading, section heading and subsection heading with titlesec package: \usepackage{titlesec} \titleformat {\chapter} ...
2
votes
1answer
40 views

Footnote-numbers in the list of figures

After I finally made it that my figures can be used with a footnote, so I can write where I got the figure from I have the problem, that each entry in my list of figures on the last page gets a number ...
0
votes
1answer
68 views

Page is numbered on ToC but not on the page itself

you guys. I am working on my thesis and facing an annoying issue: I have to number the pre-Chapter1 pages with roman numbers and, after that, with arabian numbers. I've already tried several solutions ...
5
votes
1answer
90 views

Memoir: skip section numbers, make subsection numbers continuous within chapter

Can the memoir class create a reference book whose table of contents would look like this: Chapter 1. Animals Mammals Cows ................... 1.000 Bulls .................. ...
5
votes
1answer
136 views

Numbering the list of figures in the table of contents

So I'm having a slight problem with the \listoffigures command and the way LaTeX makes the table of contents. In my preamble I'm using \usepackage[nottoc,numbib]{tocbibind} because I want to include ...
3
votes
1answer
91 views

Table numbering and listing in table of appendices instead of TOC

I am using a list of appendices based on this thread: Appendix in scrreprt - Separate table of appendices but mentioned in original TOC This works perfectly fine. But I realized I don't intend to ...
4
votes
1answer
83 views

Appendix in scrreprt - Separate table of appendices but mentioned in original TOC

I tried to find solutions to this particular case, but I wasn't able to. What I want to achieve is to create an appendix in the following class: \documentclass[a4paper, 12pt, headsepline, ...
6
votes
1answer
90 views

Numbering subsubsections in beamer

I tried using \setbeamertemplate{subsubsection in toc}[subsubsections numbered] but this does not seem to work. Here is a full example: \documentclass{beamer} \setbeamertemplate{section in ...
4
votes
2answers
127 views

How can I enumerate references?

I tried to write a paper for practicing, but I encountered some problems. Namely, Why don't I see references on the table of contents and why the references chapter has number two instead of three and ...
1
vote
1answer
80 views

Hide subsection numbering in body, but not in TOC

Is there an easy way to use numbering for subsections in the TOC, but to hide the subsection numbers in the document body? I could use \subsection*{Title} but then the entries are gone from the TOC.
0
votes
0answers
60 views

Chapters numbering

A question about chapters numbering and the ToC. I do this: \include{disclaimer} \include{dedication} \include{epigraphe} \include{ackno} \include{abstract} \setcounter{page}{1} ...
5
votes
2answers
163 views

Appendices title in ToC without appendices list

How can I make that the appendices list (numbered with \chapter{}) not appear in ToC, but appears the title "Appendices" instead. I'm using the book documentclass, and the default \appendix command to ...
11
votes
0answers
181 views

“Chapter 2 1/2”: Custom Chapter Number [duplicate]

I'm copying to LaTeX my notes on Maths subject. My professor is quite weird, and "invented" a Chapter 2 1/2 (two and a half) between chapter 2 and chapter 3. For example: Chapter 2 Vector spaces and ...
2
votes
1answer
72 views

Table of contents to display (linguex) paragraph numbers

I am writing a legal document with numbered paragraphs and I would like the table of contents to list paragraph numbers, not page numbers. I am using linguex.sty to count the paragraphs (in the MWE ...
0
votes
0answers
22 views

Unnumbered section in TOC [duplicate]

I am trying to have an unnumbered sections from appendix in my table of contents. I know I can get rid of number with a \section*{foo}, but when I do this, the number just hides from the TOC and ...
2
votes
0answers
36 views

How to change page numbers in ToC? [closed]

My page numbers were created according to user package fansy. My page numbers look like 4.1, 4.2, 4.3 and so on. But in the ToC it only shows 1, 2, 3, etc. Instead I would like ToC to display 4.1, ...
1
vote
0answers
243 views

turn numbering off, but keep Table of Contents intact?

I have a LaTeX template I created for use with Emacs org-mode, to export to PDF via LaTeX using xelatex. I don't edit LaTeX directly, I just generate from org-mode. This works perfectly for me ...
3
votes
1answer
79 views

TOC numbering of sections not incrementing correctly in lyx

I've recently discovered Lyx and am thoroughly impressed by what it can do. I'm writing my thesis in Lyx (using the article class) and would like the table of contents to look like this: Part I ...
0
votes
1answer
65 views

Number sections in secondary table of contents

I have a main document which contains a secondary documents table of contents. I'm using the example given in the first half of this answer. My secondary ToC doesn't use section numbering. I assume ...
1
vote
0answers
81 views

Table numbering starts at 2 when chngcntr / \counterwithout used [closed]

I have used the \counterwithout{table}{chapter} to remove the chapter number prefixing from table numbering yet my only table in the document is coming back as '2' I have just done a little debug and ...
8
votes
2answers
115 views

Multiple appendices, distributed throughout document

For my dissertation, I have multiple parts to represent each separate paper. I'm trying to get the appendix for each part to follow the part, and then have chapter numbering reset to 1 (rather than ...
4
votes
1answer
247 views

Remove blank page between Acknowledgements and Table of Contents?

I get a blank page between “Acknowledgement” and “Table of contents”. How can I remove it? I used a template from somewhere. The preamble is as follows: \documentclass[openany,12pt]{ubthesis} ...
3
votes
1answer
160 views

Numbering problems in chapter running head and TOC

I have this numbering problem for days, checking this website to find these http://tex.stackexchange.com/a/25212/34618 and http://tex.stackexchange.com/a/5694/34618 but these are not what I want ...
6
votes
1answer
129 views

Suppressing the page number of chapters in TOC using amsbook

I want to suppress the page numbers of chapters in the TOC of my document. A wme: \documentclass{amsbook} \begin{document} \begin{titlepage} \begin{center} { \huge \bfseries A title} \end{center} ...
3
votes
1answer
198 views

Chapter redefinition

For a system userguide, I have to follow a style guide. This style guide imposes me to have : Chapters title in TOC without number neither word 'chapter' (in TOC and in the text) In the text I have ...
4
votes
1answer
122 views

Section title coloring code makes Table of content numbered

I was looking for a way to have a colorbox as background of section titles. The following answer that I got on this thread was succesful in doing just that. But it has a side effect that is rather ...
6
votes
1answer
126 views

Loss of figure subsection numbers when using mainmatter

I recently added \frontmatter, \mainmatter, etc. with the \numberwithin setting for my figures and tables into a document, but now my figures are no longer numbered by subsection on export. Inside ...
1
vote
1answer
169 views

Different spacing between section number and its caption TOC

I want to use two different spacing between section number and its caption in the Table of Contents (TOC) I already have tried the solutions: TOC Text - numbers alignment Adjusting spaces for the ...
4
votes
1answer
171 views

Manipulate TOC: How to move partnumber to pagenumber's position?

How can the partnumber in TOC be displayed at the position where usually the corresponding pagenumber can be found; namely at the end of the toc line. On the other hand the partnumber shall be ...
8
votes
2answers
310 views

KOMA-Script scrbook: width of chapter and section number

I'm using KOMA-Script’s scrbook class and have problems with the Table of Contents. When the chapter number is too large, the chapter number is glued to the chapter heading. The chapter-section ...
5
votes
2answers
282 views

Dot after thechapter in the ToC, but not in the body text?

How do I add a dot after thechapter in the ToC, but have no dot after thechapter in the body? Here's an MWE: \documentclass{book} \usepackage{fontspec} % enagles loading of OpenType fonts ...
2
votes
1answer
132 views

How can I have list of figure etc. labelled D. List of Figures, E. List of Tables, F. Bibliography…?

I am using KOMA class scrreport and want the following structure of my appendix: A. Abbreviations B. ... C. ... D. List of Figures E. List of Tables F. Bibliography G. Acknowledgments ...
5
votes
3answers
371 views

How do I remove the chapter number from my Index 'chapter' in the ToC?

A professional indexer has done an index for my book. I have created a new index chapter, pasted and formatted the index into it's own chapter. When I compile the book the ToC includes the Index with ...
4
votes
2answers
137 views

tableofcontents* still numbers ToC

I am using \tableofcontents* to remove the page numbering from the ToC but it still continues to number the ToC. What I would like to happen is that there is no page numbering for the ToC and then ...
3
votes
1answer
119 views

Labels do not increment

In my document, I have a lot of short case studies, which I would like to number, just like figures. So I am using this: \subsubsection{Case study \ref{cs:this}: Title} \begin{figure} \label{cs:this} ...
2
votes
1answer
66 views

How to suppress Table of Contents section numbers?

I am using the following to suppress the numbering of \sections: \makeatletter \renewcommand\@seccntformat[1]{} \makeatother But in my \tableofcontents, the section numbers still appear. Is there a ...
3
votes
1answer
340 views

Display appendix chapter like: “Appendix”, and sections like “Appendix A: My appendix title”

I wish to make my appendix chapter like: "Appendix", and sections like "Appendix A: My appendix title" "Appendix B: My second title" by writing: \chapter{Appendix} \section{My appendix title} ...
2
votes
1answer
156 views

Ajdust width for the number of section [duplicate]

I have a problem with table of contents. I have changed the numbers of sections, that instead of numbers I have words, lets say "Dodatok A". But now, when the "number" of section is longer, the title ...
5
votes
1answer
158 views

appendix package: making appendix subsections

The problem with the code below is, it treats the Safety section as its own independent section. So in the table of contents, I've got 'Appendices' and 'Safety' as separate sections. I want Safety to ...
2
votes
1answer
480 views

Adding Subsubsection & Subsubsection* to the TOC with lyx?

I'm using, lyx 2.0.2, how can I add the Subsubsection in a document with a report class to the TOC, I tried the solution provided in this Question but didn't work for me, it generated no errors but no ...
3
votes
1answer
114 views

Numbering figures and tables in part

Here is the deal: I'm writing my thesis and I divided the thesis into 3 parts, each part had 2 chapters. At the beginning of each part, I added two pages of introduction. However, the numbering of ...
7
votes
1answer
153 views

Dividing chapters into ch. 1, ch. 2a, ch. 2b, ch. 3 etc

I'm typesetting a book and one of the chapters separates into two chapters so I need it to count like so: chapter 1 --------- chapter 2a ---------- chapter 2b ---------- chapter 3 --------- ...