0
votes
1answer
40 views

Table numbering incorrect

Since trying to fix the problem described in this question: Tabularx moving table to next page, ignoring optional arguments I have removed the offending Table and now noticed that my Tables have all ...
1
vote
2answers
57 views

How to make table numbering as table section_number alpha

I would like the numbering of tables in a section to be in the following format: Table section_number alpha: table caption. For examples, tables of section 4.3 should look like: Table 4.3 a: Table ...
1
vote
0answers
42 views

How to use a single count for tables and figures? [duplicate]

In a short document, I wrote reference-based sentence, which ended up reading : With the previous example (figure 1), the features used are presented in table 1. I would like both figures and ...
6
votes
1answer
71 views

How can I combine endfloat and chngcntr?

Is there any way to combine the packages endfloat and chngcntr? I would like to have all tables at the end of the document (with endfloat) and a numbering that includes the section number (e.g., ...
2
votes
1answer
144 views

Eliminate reference to chapter in table caption (memoir class)

I'm editing a book using the memoir class. Each chapter has a different author, and I restart numbering of all elements at the start of each chapter. So far, so good. However, I want to eliminate the ...
2
votes
0answers
145 views

table numbering not in order

I am somewhat irritated about the numbering of tables. Unfortunately i dont have a MWE, i doubt the "error" will be seen in a short example (this is a thesis...). Also when moving things around the ...
5
votes
1answer
36 views

Total number of longtables (v3.02+)

I'm wondering, are there any ways to get (and forward-reference at the beginning of the document) the total number of tables when using longtables? There are utility packages for standard table ...
5
votes
1answer
64 views

Need labels and refs in longtable rows [duplicate]

In a longtable, I need the first column to display numbers based on an enumeration by references to labels. This means I can refer to the rows somewhere else in the text. I imagined it would help to ...
3
votes
1answer
119 views

Table numbering and listing in table of appendices instead of TOC

I am using a list of appendices based on this thread: Appendix in scrreprt - Separate table of appendices but mentioned in original TOC This works perfectly fine. But I realized I don't intend to ...
3
votes
1answer
359 views

Change Table Caption Numbering

I want to change the caption number from 2.1 to 2.3.1 as my section is 2-3. I got try to use \usepackage{chngcntr} and \counterwithin{table}{section} but due to my section title is 2-3. It will label ...
3
votes
1answer
64 views

Problem with numbering of figures

I need to reset numbering of figures and tables to 1, 2, 3 and to get rid of numbering 1.1, 1.2, 1.3,... I tried many commands but nothing worked. Could you help me please? The .cls file is HERE. ...
2
votes
1answer
175 views

Equation numbers under equations

I have three similar equations which I want on a same line. I put them in tabular environment nested within subequations following this: subequation in tabular. Now I have this code: ...
3
votes
1answer
104 views

Table numbering in unnumbered chapters (e.g. \chapter*)

I've tried to google this in about a dozen different ways, but didn't find anything. I have an introduction chapter that uses \chapter*. The numbering of the subsections is fine - they're still ...
4
votes
1answer
68 views

Problem with starting to number at next rows in tables

I've tried with some solutions but I can't get it. I'd like to start to number at third row in this table. Also, I have a problem with \rowcolor Please, help me. \documentclass[10pt, ...
2
votes
1answer
118 views

Numbered list in rows in tables

I want to have numbered listing in each row, I've tried with \rownumber, but it doesn't work. I wrote a number at the beginning, but Could it be automatically? Can you help me? This is my code: ...
9
votes
1answer
84 views

How do I make an exact copy of a table, but keep its number for referencing?

I have a table, and I want to print it twice in my document. I want them to have the same label, caption and number, so that in the caption when it says "Table 1: foo" the same number shows up, and so ...
2
votes
1answer
133 views

Remove Numbering (and “()”) on SubFloats (in a table)

So I have set of three tabular environments in a table: \begin{table}[h] \centering \scriptsize \subfloat[``student" data table]{ \begin{tabular}{lcc} \toprule Column Name & Data Type ...
1
vote
1answer
205 views

Using table number in the text

Latex takes care of the number of tables by itself. Like it will automatically number the table as Table 4 etc. I want to use this number in the text. For example, if I write "See Table 4" and later ...
5
votes
2answers
214 views

Footnotes being rendered as letters inside tabular

I wrote a couple of footnotes inside a table using minipage, but they are rendered as letters instead of numbers. I couldn't find anything about it in Google. I tried using ...
3
votes
1answer
329 views

Latex: Running table number

There are several tables in my paper, out of which one table is very long and need to be place on landscape page. This is my Table.4 and I want to put it on the last page. For that I used \setcounter ...
3
votes
1answer
304 views

subfloatrow and tabularx, wrong numbering of figure

I wanted to "group" a figure and a table to get one figure. It has been proposed to use floatrow for this, with the possibility to remove the subcaptions later on (subfloatrow of package floatrow does ...
4
votes
1answer
214 views

Different type of captions

I have four tables. The first table has a caption of Table A: Title. The other three tables have captions of Table 1: Title, Table 2: Title, and Table 3: Title. When I use \caption{Title} it ...
4
votes
1answer
548 views

Using sidewaystable enviroment with footnotetext

my new problem si this code: \documentclass[a4paper,12pt]{article} \usepackage{rotating} \begin{document} \begin{sidewaystable}[h!] \centering \setlength{\tabcolsep}{5pt} ...
10
votes
1answer
315 views

When using longtable, my table counter starts from 2 rather than 1. Why?

When using longtable, my table counter starts from 2 rather than 1. Why? \documentclass[12pt]{article} \usepackage{xcolor} \usepackage{array,booktabs,longtable} %\extrarowheight5pt ...
2
votes
1answer
2k views

Numbering equations in tabular environment

I wish to number equations in a table, like numbering them in \begin{equation}. ... \end{equation} Since all the equations are written as "inline" equations (for example, $a = b+c$) in ...
21
votes
1answer
1k views

How to enumerate the rows of a table

I want to automatically enumerate the text rows of a table. Is there an option within tabular, or another package? (Of course I do not want the rules to be enumerated.)
5
votes
2answers
2k views

Reference table rows by automatic counter

Problem I have defined an environment to automatically number example sentences throughout my document. It uses the tabular environment and automatically numbers the first column of each row using a ...
3
votes
2answers
8k views

Changing Table Numbering Scheme to Include Section Number

When I create a table and use \caption, Latex automatically adds "Table 1.1" or something similarly numbered. I'm using the book format, and want the caption numbering to be of the form "Table x.y.z", ...
1
vote
3answers
96 views

Newbie table formatting/numbering question

I'm trying to format a table like the following: 0.0a summarry b other summarry (long) .1a junk b more junk 1.0a etc b so forth Ie, with all the ...
4
votes
1answer
2k views

Chngcntr: \counterwithout not working

I need to place the tables section after my appendix. I've used \counterwithin{table}{section} to number appendix tables A.1, A.2, etc. Then I use \counterwithout{table}{section} so that the tables ...
1
vote
1answer
165 views

label for table [duplicate]

Possible Duplicate: Where to put the \label on a figure environment? I've got the table numberin with sections: \numberwithin{table}{section} The following table is 2.1. for example: ...
6
votes
3answers
2k views

Longtable caption numbering

I am trying to prevent a table from showing up in the list of tables. I used long table to create the table. This is the first table in my document. I know \caption*{} command should do the trick but ...
5
votes
1answer
207 views

Table counter increasing by 2 for every table

I'm having some issues when using tabularx within a table environment. The most annoying of these issues is that the table counter seems to be increasing by 2 for every table. So instead of having ...
3
votes
3answers
2k views

Enumeration of footnotes wrong

I have a small table, where I need a footnote and after it a text with another footnote. So I researched for it and found out, that I shall use \footnotemark in combination with \footnotetext in the ...
8
votes
3answers
4k views

Automatic table row numbers

Is there any way to get automatic row numbers in table? For example, if I define table contents as \begin{tabular} % black magic column definition \rownumber & foo\\ \rownumber & bar\\ ...
1
vote
1answer
199 views

Tabulating all labelled equation numbers with their labels in latex

Is there any way in Latex to collect the labels for references from a document in a table? I'm writing a long document but would like to collect together my references of various kinds (i.e. ...
7
votes
1answer
2k views

Subtable Reference Numbers Start at Zero

I have a latex document with a table that contains two subtables. When I reference the entire table it the numbering starts at 1, but when I reference one of the individual subtables the numbering ...
2
votes
1answer
357 views

Table Reference Format and Hyperlinks

I'm using hyperref package and refer to hundreds of tables from the appendix. My labels for tables look like: \label{table:some-numbers}. I then refer to it from the main text as ...