{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.

learn more… | top users | synonyms

5
votes
2answers
304 views

Footnotes being rendered as letters inside tabular

I wrote a couple of footnotes inside a table using minipage, but they are rendered as letters instead of numbers. I couldn't find anything about it in Google. I tried using ...
6
votes
1answer
161 views

Caption number increases by two for every inclusion

I am trying to typeset my captions in margin using marginpar and captionof. Here is what I get by the MWE. Note the wrong caption numbers. The first caption is included using macro \fixedmarginpar ...
3
votes
1answer
415 views

Latex: Running table number

There are several tables in my paper, out of which one table is very long and need to be place on landscape page. This is my Table.4 and I want to put it on the last page. For that I used \setcounter ...
5
votes
1answer
157 views

Change listing number separator

I am working with the listings package and trying to change the separator from the default period to a hyphen. However, I cannot seem to figure out how to. I tried the code snippet below, but it ...
3
votes
1answer
328 views

algorithmicx, broken left align with custom numbering

I am trying to use the algorithmic package with Step1. Step2. instead of 1, 2, ... line numbering and I have numberless lines. An example: \documentclass[11 pt]{report} \usepackage{algorithm} ...
0
votes
0answers
41 views

Numbering section: “1” instead of “0.1” [duplicate]

Possible Duplicate: Section numbering I have a problem with my numbering in LaTeX. When I do \section{foo} the result is 0.1 foo and what I need is 1 foo Does anyone have a ...
4
votes
1answer
653 views

How to display Arabic numerals with \ref but Roman numerals otherwise?

To show all chapter numbers as Roman numerals, I’m using \renewcommand\thechapter{\Roman{chapter}} The fourth chapter, for instance, is therefore “Chapter IV” everywhere. Is it possible to show ...
5
votes
1answer
105 views

How to get the References section to be numbered as if it were created via \section

I am using the bibtex library to reference. Everything works fine but ideally I would like the reference section generated by bibtex to have the ordered number like \section{} generates. For ...
8
votes
1answer
679 views

custom automatic equation numbering

I just read a book where the equations in the Introduction were numbered slightly differently compared to the other sections, namely by (In.x) where x stands for the number (so it starts off as ...
18
votes
1answer
375 views

Unusual numbering: combine alph, Alph, arabic

I would like to have an unusual numbering aAa going as follows: 0 -> * ------------------------- 1 -> a 2 -> b ... 25 -> y 26 -> z ------------------------- 27 -> A 28 -> B ...
7
votes
2answers
723 views

Defining shared counters for theorem environments *after* environments are defined

I am trying to use the same numbering for theorems, propositions, definitions, etc. This is normally easily be solved by using amsmath and defining these environments and using the same counter: ...
3
votes
1answer
389 views

Changing the mark of endnotes

I am using both footnotes and endnotes in a chapter with the help of the endnotes package. However, both footnotes and endnotes are numbered by Arabic number. I would like to keep the Arabic numbers ...
10
votes
2answers
1k views

How to make page numbering with ligature roman style?

I use roman page number for front matter, I was just wondering, is it possible to make these roman numbers as ligature? See. Roman: and roman:
3
votes
1answer
310 views

Formatting labels of chapters and sections

I'm just starting with this amazing world of LaTeX. I'm wondering how to set the format of a document (with some stuff centered and sections with no relative numbering) I'm trying with the titlesec ...
5
votes
1answer
98 views

Using page counter in \newtheorem

I would like to use the page counter as a the first part of the label for definitions. I tried \newtheorem{definition}{Definition}[page] but that wouldn't work if the definition is at the top of a ...
3
votes
1answer
281 views

Print section number with moderncv

Using moderncv, I want to print the section number before the section name. Does anyone know how to do it?
5
votes
2answers
390 views

Splitting examples in gb4e

I would like to split examples in the \usepackage{gb4e} to get explanatory remarks as close to the explained item as possible. Usually, my typeset examples are looking like this: (1) blabla (2) a. ...
9
votes
1answer
5k views

Systems of equations with a single number

I want to write a numbered system of equations. Right now, this is what I do and I am satisfied with the output, but I have a feeling it's not the best way to do it. \begin{equation} ...
5
votes
1answer
184 views

Theorem environment numbered according to subsection

I was wondering if there was a way to modify the theorem environment so that it interacted with sections/subsections as follows: \section{} \subsection{} \begin{ex} Whatever \end{ex} ...
3
votes
2answers
1k views

Wrong numbering in the List of Figures with subfigure package

I get a wrong numbering of subfigures in the List of Figures with the following MWE. If I remove the FIGTOPCAP option or if I put the \caption on the top, the problem is solved, but I'd like keep ...
6
votes
1answer
208 views

Using \tag in unnumbered versions

According to the amsmath documentation (section 3.1, page 7) \tag and \tag* can also be used within the unnumbered versions of all the amsmath alignment structures It provides no examples ...
3
votes
4answers
6k views

Numbering sections

I want my sections, subsections and subsubsections in revtex to be marked by arabic numbers and 1.1., 1.1.1. etc. Instead I'm having roman numbers and letters. Can somebody help me?
5
votes
1answer
843 views

Resume numbering the footnote

I use the following piece of code to put something as my footnote (borrowed from a friend). {\let\thefootnote\relax\footnotetext <text> } But what happens is after putting this, any further ...
8
votes
2answers
2k views

Customize section numbering in TOC

I'm working with report class and I would like to customize headings of chapters, sections and subsections, abvoe all the look of numbers before their respective headings, both in the text and in the ...
8
votes
2answers
284 views

Enumerate with a range of numbers in an item's label

I am preparing an outline of lectures for a course. Some topics will take more than one lecture. I want to create an enumerate environment that reflects this. I want to end up with something like ...
4
votes
1answer
188 views

Fit the height of the chapter number to n-times the height of the chapter name

I would to get the chapter number tall n-times the chapter name in order to have a better proportion between the two elements. Why I get errors and how can I fix that behaviour? I thought something ...
2
votes
3answers
222 views

a line after text?

I am not aware of having a text with a colon and a line as a command. Is this possible? I am using the exam document class so I can use the \question command for the proper numbering. example: ...
5
votes
1answer
94 views

numbering a several line “equation”

I'm trying to number an equation, which spans over several lines. I need for it to look like this My current tex for this is: \documentclass[a4paper,12pt]{article} \begin{center} {\it ``If A is ...
4
votes
2answers
493 views

Choosing numbering on equations

I'm writing some course notes and through out I want to refer to the equation number in the book we are using, rather than numbering the equations within the document. In other words how can I decide ...
7
votes
1answer
519 views

Numbering to start from section not chapter

I want chapters not to have any numbers (both in the text and in the table of contents) and the numbering in each section to start from 1. For example (both in text and toc): Introduction 1 Section ...
2
votes
1answer
249 views

\numberwithin makes the first equation unnumbered

I might be doing something stupid, but the following code produces a document with the first equation unnumbered (only an empty set of parentheses is given). The second equation is correctly numbered ...
6
votes
1answer
170 views

Different numbering scheme per chapter [duplicate]

I would like to change the numbering scheme for my theorems per chapter. That's because I have smaller and bigger chapters. Bigger chapters need subsections for proper structuring, and so my theorems ...
8
votes
3answers
283 views

Changing the number of figure or equation automatically in text by changing the places of figures and equations

Is it possible to automatically reference a figure and equations in text? I meant sth like bibliography references. Moreover, by changing the place of the figures or equations relevant figure or ...
14
votes
3answers
17k views

Change figure numbering for appendix

I want to the figure counting in my document when the appendix starts, and follow a different pattern than 1, 2, 3... Specifically, I want figures in the appendix to start with A.1 onward, instead of ...
5
votes
1answer
249 views

Section header for references shows wrong number

So I downloaded a nice looking article template which has a custom look for section titles. But now the number next to the References header is the same as that of the last section. How do I fix ...
4
votes
1answer
954 views

Tag placement in split equation within alignment block

Whenever I have an equation that does not fit on a single line, I am using \begin{equation}\begin{split}...\end{split}\end{equation} as recommended in the AMS math guide. This gives me an equation ...
6
votes
1answer
314 views

section numbering including only the lowest sectionning level

I'd like to have in my document the main parts (chapter, section) not numbered, but having numbered subsections and subsubsections. I'd like that the numbers restart in each new unit. I was trying to ...
4
votes
2answers
157 views

Chapter.Part.Section numbering

Is it possible to have numbering such that my Chapters can contain Parts which contain Sections? Currently I have: Chapter Section{foo} Section{far} Part{baz} Section{bar} ...
5
votes
3answers
372 views

Equation numbering

Suppose that when we write an equation in the align environment and we break the equation in two lines. There is only one equation number. How can I place this number not in the last equation line, ...
1
vote
2answers
2k views

Enumeration of equations in the double dollar math mode

How introduce enumeration of equations in the double dollar math mode (i.e. $$...$$)? Or even better, is it possible to make $$...$$ as a particular math environment, e.g. equation or align?
5
votes
1answer
131 views

How to have \section{…} numbered as if it were a \subsection{…} but keep the same formatting

So I'm a student writing chapter summaries for final exam preparation. I'm using the 'article' documentclass and am using separate documents for each chapter. How can I have \section{...} numbered as ...
3
votes
2answers
4k views

Bibliography numbering style

I'm creating a bibliography for a paper submission to The Bulletin of Math Biology. I've created a custom .bst file with custom-bib, but haven't been able to get the numbering correct. I'm not sure ...
3
votes
1answer
493 views

Lyx : After Changing numbering, Part appears in regular text in pdf

Lyx. Document class : article (paper) I wanted numbering for the TOC but without the "Part I" before it. So I went to Document -> Settings -> Numbering & TOC and changed the numbering column to ...
1
vote
1answer
524 views

How to change the starting reference number in Natbib in a given bibunit?

I'm using bibunit and Natbib packages with a numerical numbering. \begin{bibunit}[plainnat] \nocite{ref1,ref2} \putbib[mybiblio] \end{bibunit} \begin{bibunit}[plainnat] ...
3
votes
1answer
442 views

List item text alignment

I have nested enumeration with a long labels. As a result, the text in items becomes very shifted to the right. I want that this text in items won't be moved at all (the same horizontal offset as the ...
6
votes
1answer
1k views

How to move chapter number in classicthesis class

I am using classicthesis for my thesis. In each chapter LaTeX puts its number, but I need to move it. Here you have an screenshot example, in this image I wish to move "4" number to the left.
4
votes
2answers
147 views

Description numbering

I have an article document. In this document I have sections and subsections. In a subsection there are nested 'description' lists. I want that items of this description have numbers which use the ...
4
votes
2answers
2k views

How to create new counter of equation

How to create a new counter of equation. The new equation is matriz and use other sequence number. \documentclass[a4paper,10pt]{article} \usepackage[utf8]{inputenc} \begin{document} ...
5
votes
1answer
916 views

Section Counter: 0.1 steps, starting at 1.1

I'm using \part* and \section in order to formate my file. The problem is now, that \section just countrs from 1 to n. But what I actually need is the sections counting from 1.1 to 1.n, and then, ...
0
votes
1answer
107 views

Appendix as regular \chapter; Appendixes as \section within Chapter-Appendix but with \alph chapter number [closed]

I'd like to have something like this 1. Chapter 1 1.1. Section 1.1 1.2. Section 1.2 2. Chapter 2 ... 7. Appendix A. Appendix 1 B. Appendix 1 Im trying it like this: \chapter{Chapter 1} ...