{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.

learn more… | top users | synonyms

2
votes
1answer
18 views

sub-algorithms using algorithmic, part a part b

I am currently displaying algorithms in a sequence 1-9. Now I have for example algorithm 7 and I would like to name it algorithm 7a and the next one will be algorithm 7b and then algorithm 8 again. ...
3
votes
1answer
46 views

Use question counter for numbering equations in solutions that appear at end of document

I'm using exsheets for writing problem sets. I want to number equations by question to which they pertain. So I use \numberwithin{equation}{question}. This works well for equations that appear within ...
3
votes
1answer
87 views

How equations in the appendix to be numbered, if the section they are in is unnumbered?

I am using the elsarticle document class. As I have only one appendix, I would like to remove the letter "A" after "Appendix". Unfortunately, if I write \section*{Appendix title}, the numbering of ...
1
vote
2answers
48 views

How to have a single vertically centred equation number for multiline equation in LyX

What I want is a single equation number located between the second and third lines (vertically centered behind the lines) like in Section 18.6 of the LyX detailed Math manual: In Lyx, I choose ...
1
vote
0answers
23 views

Section numbering disappeared after updating titlesec package [duplicate]

I'm using classicthesis to write my reports. I've always use the tweaked version of it since 2011 for my stuffs (e.g. back then it was for the master thesis). Today after updating the package in ...
3
votes
1answer
25 views

\tag is repeating equation number

I am trying to label and number one line in align* environment using \tag{\theequation} and it is just repeating the same equation number. It uses the previous equation number for all subsequent \tag. ...
2
votes
1answer
45 views

Removing numbering everywhere except table of contents

What I essentially want to do is to remove numbering of sections everywhere(primarily, the header and in the main body) except the table of contents so that sections are numbered there but my left ...
4
votes
2answers
35 views

amsmath: how can I number individual equations in a gathered environment?

I have a complex set of equations, displayed using amsmath's align and gathered environments. I need to refer to some of the cases in the gathered environments, but they are not numbered. Here is a ...
4
votes
2answers
71 views

Exsheets print subsection counter?

When defining a counter format in exsheets I can use ch for chapter, se for section orqu for question. But how can I reference to the subsection counter? I can do: ...
0
votes
1answer
62 views

Theorem numbering as subsections and automatic solutions

I have a problem environment where the counter is coupled to the subsection counter. However this doesn't work with automatic solutions. I tried to couple the solutions counter to the subsections as ...
0
votes
0answers
55 views

Change numbering section subsection and toc to 1 1a 1b 2 a etc [duplicate]

I need to renumber the sections and subsections in beamer on: 1. Section 1a. Subsectio 1b. Subsection etc. How to do this? But this command does not work in beamer: \renewcommand \thesubsection ...
0
votes
1answer
104 views

How to create a numbering of the sections and subsections in beamer 1. 1a 1b

How to create a numbering of the sections and subsections in beamer 1. 1a 1b etc. in the frame and in table of contents? I want change numbering to something like that: First 1a 1b Second 2a 2b ...
2
votes
1answer
35 views

Using minutes package, how to change the minutes numbering

To create my minute report, I used following template : http://texdoc.net/texmf-dist/doc/latex/minutes/Sample.tex that I heavily commented because my needs are very basic, but this template is still ...
0
votes
0answers
66 views

Numbering of sections, subsections, subsections, and all theorem-like environments in the dictionary order

I would like the numbering of sections, subsections, subsections, and all theorem-like environments to be in the strict dictionary order. Moreover, the number of a theorem-like environment contained ...
3
votes
3answers
133 views

amsmath aligned environment: correct positioning of equation number on the last line with tbtags

tl;dr How to place the equation number on the last line of an {aligned}[t] environment? (Similar questions have been asked in Equation number in aligned environment after last line and How can I ...
0
votes
1answer
41 views

Compiling a file with repetition of the same document

What I am trying to do is to implement an option on my tex file that allows me to choose how many times the document I wrote is repeated in the compiled pdf. The reason is that I need the pages to ...
3
votes
1answer
31 views

Remove the word “chapter” in book class and put number in the white margins at the same time

I am working on my thesis in the book class, I work in Kile under Linux. So this is an overview of my latex code: \documentclass[a4paper,10pt]{book} \usepackage[utf8]{inputenc} % ### Chapter title ...
3
votes
3answers
90 views

Removing number on ToC, but maintaining the position of the text

I am trying to remove the numbering on the table of content (and on the section too) but maintaining the position of the name of the section, like in following the figure: And then it would looks ...
1
vote
0answers
21 views

Subsection Specific numbering of theorem, definition, lemma

I have a document in which there are 4 layers of sectioning --- chapter, section, subsection, subsubsection, and each smaller unit, say a subsubsection, or subsection, or section would have at most ...
4
votes
1answer
43 views

Numbered sections in APA6

I am trying to get automatically numbered sections, subsections, and subsubsections while using the APA6 format. Is it possible to number sections even though section numbers were deactivated by APA6? ...
7
votes
1answer
63 views

Subequations with more than 26 items

I need any solution to this problem. I have a subequations environment with an align environment inside of it, and then a bunch of equations. A lot of equations. Actually more than 26. When I try to ...
3
votes
1answer
32 views

Number/Letter Theorem

Is there any way from the code below that a number letter/number theorem can be generated? I am trying to achieve a theorem labeled 1.1A. \documentclass{book} \usepackage{amsthm} ...
0
votes
0answers
18 views

Titlesec removes numbering on subsubsection [duplicate]

I am using report class with the titlesec package. When I enter a \subsubsection the numbering format is removed. MWE: \documentclass{report} \usepackage{titlesec} ...
1
vote
0answers
31 views

Number above title .. not chapter.. in article [closed]

I am looking to get the number 2 above my Title in my Article. I know how to do it in a chapter of a book document class with a set counter: \setcounter{title}{1} but i dont know how to do this ...
0
votes
1answer
18 views

sidewaysfigure wrong numbering

I am writing a document where the second figure must be sideways. I do this by using: \begin{sidewaysfigure} FIG2 \end{sidewaysfigure} But this changes the order of the figures. Now FIG2 comes ...
2
votes
1answer
31 views

Chapter title with specific number

I was wondering how I would get the number 9 to appear on my chapter in latex? so far for my title code i have \documentclass{report} \begin{document} \chapter{Polarity,\\ and blocking and ...
2
votes
1answer
37 views

Adding A to appendix: Missing-Number-Error

I want to add "A" to equations in my appendix (and not to other chapters). At several places here, I found the solution to be \renewcommand{\theequation}{\Alph{chapter}.\arabic{equation}}. I tried ...
3
votes
1answer
50 views

Change Footnote Order/Numbering at Bottom of Page

I'm using LyX. I created a box/minipage and put a table in it, so as to allow footnotes in the table (see here: How to put notes under table in LYX). I am using manyfoot for footnotes and tried ...
1
vote
2answers
45 views

How do I start a list on the second level?

I am using the enumerate environment, and I want to have my lists start on 1.1. instead of 1., and 2.1. instead of 2. How can I hide the first level?
1
vote
2answers
35 views

Change section format [duplicate]

I want to change the section labels so that, instead of writing something like '1 Section', I get 'Section 1'. I want to keep the numbering. How can this be done in Latex? \renewcommand? ...
9
votes
1answer
221 views

How to write the equation number manually? [duplicate]

Does anyone know how to number an equation manually? I know using \begin{equation} automatically numbers the equation but I want to number it manually. Like this: ax=b 2.1 ax=b ...
2
votes
2answers
33 views

How to enumerate a problem set in a book accordingly with the chapter number?

I am writing a book and in the end of each chapter I have a section with labeled problems that looks like this: \chapter{Chapter 1} Bla bla bla... \section*{Problems:} \begin{enumerate} \item ...
0
votes
1answer
38 views

Manual numbering of Theorems [duplicate]

I have a setup where theorems are numbered automatically. Now I want a single theorem be numbered with special number, e.g. after Theorem 2 write Theorem 2'. Is it possible?
5
votes
2answers
73 views

How to create comma-formatted number from macro output value?

In the following document I would like for the numbers to have a thousandths separator comma. \documentclass{article} \usepackage{totcount} \begin{document} \newtotcounter{fund} ...
4
votes
2answers
89 views

How to change numeration in ToC

I've got a problem while trying to figure out a structure for report document. At this moment I have: \chapter[Chapter 1]{} \section{Section 1} \subsection{Subsection 1} \subsection{Subsection 2} ...
3
votes
1answer
53 views

Add numbering to references

I created my bibliography style (author-year) in "custom-bib" using natbib. References are generated using bibtex and sorted alphabetically. Publisher wants to, they were still numbered from 1 to n. ...
4
votes
1answer
40 views

trying to fix bug which gives conjecture the wrong number

I have a bug in some LaTeX code that I am working on whereby it gives a conjecture the wrong number. Here is a short piece of code which reproduces the problem, sorry if the code is a bit excessively ...
2
votes
1answer
39 views

Adding right brace and equation number

I have an eqnarray that consists of 4 lines. I would like to have a right brace } that spans the last two lines with equation number, first equation with equation number and second equation with ...
1
vote
2answers
66 views

Numbering exercises, Error: Missing number, treated as zero

I'm trying to horizontally number some exercises for a problem set, and I'm getting an error "Missing number, treated as zero." on the two lines after "\multicolumn" shown here: ...
2
votes
1answer
38 views

subsection numbering in headline with smoothbar theme

With the smoothbar outer theme (used by Darmstadt), I like the subsection headline, but I want to print the section and subsection number before. I've tried to modify the headline template by adding ...
1
vote
1answer
38 views

How do I fix wrong numbering when using afterpage in appendix?

So I'm writing my thesis and was in need of a table in landscape mode as it was too big, and found a simple solution at How to place a table on a new page with landscape orientation without clearing ...
5
votes
2answers
43 views

Replicating figure in another document with same numbering

I have a large document with several images, and I'd like to duplicate some of these images in individual pdf documents on their own, while preserving the way they display, figure numbering, and ...
3
votes
1answer
37 views

How can I change the position of my page number ONLY for one section?

The thesis of my university requires the pagination in the following way: (1) Pages preceding the introduction (acknowledgment, table of contents, list of tables, etc.) are to be numbered with ...
2
votes
3answers
41 views

Right-justifying a comment for an equation that uses leqno

I'm unable to get the formatting correct when attempting to add a comment to an equation that uses leqno. Ideally, I'd like the equation to remain centered regardless of whether or not it is numbered. ...
1
vote
1answer
26 views

subsubsection not working in my thesis macro

I'm unable get the \subsubsection layer using my thesis scripts. It works fine up to subsection but not beyond that level. The counters have been set to a depth of 3 and so should be working for ...
1
vote
3answers
70 views

How would I get custom-colored equation numbers as simply as possible?

In a continuation of efforts to create a complete SAE technical paper class file, I need a little help finding the easiest way to create colored equation numbers. In my class file, I already define ...
2
votes
2answers
33 views

Formula numbering

I want to write a short note using amsart and I wish that the numbering of formulas should be (1), (2) and so on (not (0.1)...) and also that Theorems should get the numbers 1,2, (not (0.1)...). What ...
0
votes
2answers
52 views

How to format section headings?

a question about formatting section titles. In the article class, I want to format my section titles as follows: Hide the section number in the title. Use upper case. Add a dashed title rule below ...
4
votes
3answers
35 views

Equation numbers in split environment messed up by ntheorem thref

When I use ntheorem with the thref option, every time I use the amsmath split command the numbering skips ahead by one. Here is an example: \documentclass{article} \usepackage{amsmath} ...
1
vote
2answers
46 views

number figures and tables together with one label name [duplicate]

I would like to label my figures and tables continuously using S.I, S.II, S.III, etc in the caption of both, figures and tables. I can change the figure and table caption to S.I, ... by ...