{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.
2
votes
1answer
63 views
Two labeled equations on the same line with labels lining up vertically
I'm using the following LaTeX code within the amsmath environment in LaTeX (MiKTeX 2.9 and TeXnicCenter under Windows):
Let $f$ represent the resulting number of such two-step cycles that operate per ...
0
votes
0answers
78 views
How to number multiline equations? [closed]
I'd like to write a multiline chain of equations and inequalities and to number several of them in such a way that i can refer to these numbered equations in the surrounding text. Can i do so using ...
2
votes
1answer
58 views
Using \value and \arabic to label sections
I'm trying to create a document that follows a numbering system of:
1.
1.a
1.a.1
1.a.2
1.b etc
I've tried to use the commands below to specify which section/subsection should be labelled with ...
7
votes
3answers
127 views
Part numbering with suffixes: I, II, IIIa, IIIb, IV,
I would like to have my parts numbered like this:
I, II, IIIa, IIIb, ... , IV, ...
I have written some code which works fine. But when using hyperref, I get this warning:
destination with the same ...
1
vote
2answers
78 views
Equation number position in a new line
How do I put the number of each equation in the new line (not the same line with the equation, located in the next line on the right)
This is required for all the equations in my thesis (which I ...
0
votes
0answers
24 views
Heading subsubsection without number [duplicate]
I'm writing my thesis and, if I insert a subsubsection, it appears without number. Therefore, if I refer to it, LaTeX works properly, that is it refers with its true number (i.e. 1.1.1). Why? How can ...
2
votes
1answer
70 views
How can I number my subsequent results after my theorems?
I am trying to number my theorem results after my theorem, i.e Theorem 1 followed by Result 1.1, Result 1.2,... and Theorem 2 followed by Result 2.1, Result 2.2 and so on, where the first number after ...
1
vote
0answers
59 views
Customize section numbering from Springer templates
I really like the style of Springer book (which is available here), so I decided to customize it for my own book.
In that template, the section in chapter is labelled as : 1.1 (1st section in ...
4
votes
1answer
84 views
Subsection numbering with prefix
How to set custom subsection numbering? I want to have prefix "KAT/" before number, it should look like this:
KAT/001 Client - blablabla
KAT/002 Visit - blablabla
KAT/003 User - blablabla
What is ...
6
votes
1answer
90 views
Glossaries with section as counter does not work in appendix [closed]
I would like to use the glossaries package with the option counter=section.
This works well as long as I don't use any glossary entries in the appendix.
It seems the section counter is reset by the ...
0
votes
1answer
39 views
Defining clauses as in the C standard document?
I am trying to write a document with the same presentation as the C standard document.
Here is the document: C draft n1570
Look at page 256 and the 7.12.4.1 section for example. My question is how to ...
3
votes
1answer
71 views
Change theorem numbering from Roman to Arabic
I am trying to number my theorems according to section number. I use the following in the preamble, which works:
\newtheorem{theorem}{Theorem}[section]
However, since my section is numbered as ...
2
votes
1answer
79 views
Getting section numbering to start at 0
\documentclass[11pt,a4paper]{article}
\usepackage[T1]{fontenc}
\usepackage{lipsum}
\usepackage{tocloft}
\begin{document}
\tableofcontents
\thispagestyle{empty}
...
9
votes
2answers
113 views
Using memoir, how do I number paragraphs?
I am trying to implement paragraph numbering with memoir. I would like the numbers to be
in the outside margin,
flush against the text block, and
vertically aligned with the first line of the ...
3
votes
1answer
53 views
Last chapter number
Is there a way similar to what is achieved by the lastpage package to get the Last Chapter number? I would then like to use this information to design chapter headings.
0
votes
0answers
94 views
“destination with the same identifier” warning with the amsbook + numberwithin [closed]
Here is a simplified version of what I have:
\documentclass[oneside]{amsbook}
\usepackage{amsmath}
\usepackage{amsthm}
\usepackage{hyperref}
\usepackage{lipsum}
%theorems
...
0
votes
3answers
81 views
Remove section numbering but retain the short-title optional argument
I have a section like that:
\section[ABC]{ABC\footnote{FN1}\footnote{FN2}}
I want to remove section numbering, but I must use \section[]{}.
So when I try
\section*[A]{B}
I get only
[
Here ...
5
votes
2answers
74 views
How to create multicolumns list environment with the package 'enumerate'?
Let us consider The following example
\documentclass{article}
\usepackage{enumerate}
\begin{document}
\begin{enumerate}
\item Which of the following numbers is the largest ?\\
...
2
votes
1answer
44 views
Remove Numbering (and “()”) on SubFloats (in a table)
So I have set of three tabular environments in a table:
\begin{table}[h]
\centering
\scriptsize
\subfloat[``student" data table]{
\begin{tabular}{lcc} \toprule
Column Name & Data Type ...
4
votes
2answers
147 views
How to add line numbers to a program listing/code?
How do I copy code in to latex to get a result which looks like this:
...Without the red bars of course. I don't know how to get the numbering on the left side when I compile LaTeX. Using \verbatim ...
1
vote
1answer
50 views
Using \footnotemark with letters
There are many answers to questions about \footnotemark, but I couldn't find one to mine. I have the following code and it works fine. What I need to use is \footnotemark [a] instead of \footnotemark ...
2
votes
1answer
62 views
Chapter Numbering
Using code from Remove "chapter #" from the chapter title but keep chapter number in the table of contents
This removes the Chapter # from the header, however can I have the chapter number ...
1
vote
0answers
173 views
Chronology - year in first item
In the following chronology example, how should it be written, when I need number of year in first comma? In my case I need 1980 to show.
EDIT BY LOCKSTEP (copied from edit of now-deleted post by ...
5
votes
1answer
47 views
How can I add a section reference to equation labels in an unnumbered section?
I have an unnumered section in a document, defining notation for the further contents. Since it's unnumbered, the equations within are labelled: '(1)', etc.
For example:
\documentclass[12pt]{book}
...
1
vote
1answer
62 views
Numbering theorems as subsubsections
I am working on a large, multi-chapter document using the memoir class. I have sections, subsections, and subsubsections within each chapter, and within the subsubsections are theorems, lemmas, ...
3
votes
3answers
97 views
table numbering style
The tables in my document are labeled 1...N; I like this format. I also have a table which belongs to the appendix of my paper that I would labeled A1 or A.1 . Is there a way to change the numbering ...
2
votes
3answers
68 views
Problems with sectioning / toc
I've got a problem with my ToC / sectioning.
First of it all: my code:
\documentclass[a4paper, oneside, 12pt, listof=totoc, bibliography=totoc, titlepage]{scrreprt}
\usepackage[ngerman]{babel}
...
5
votes
1answer
135 views
Beamer \tableofcontents does not display the correct section number after \setcounter{section}{…}
I use beamer to make presentations for my lectures (I despise PowerPoint). Each presentation represents one chapter of the textbook. Therefore, I need the section numbers in the beamer presentation ...
3
votes
1answer
62 views
How to create a numbered list of references when using verbose-trad1 style with the biblatex package?
I am using the biblatex package in the verbose-trad1 style.
When generating a bibliography at the end of my chapter, all references are listed in alphabetical author, but they are NOT numbered.
Is ...
2
votes
0answers
71 views
Subfloatrow: Omitted incrementation in figure numbering when using subfigures
I suspect this question is slighty related to another question found in subfloatrow: incorrect continued numbering. Trying out the MWE below, the incrementation of the figure number of figure two is ...
8
votes
2answers
52 views
Modifying an individual subsection number
I have an article divided into sections and subsections. I need to insert a subsection "5.2a" between "5.2" and "5.3". What is the easiest way to do this?
3
votes
0answers
60 views
includepdf and tableofcontents without numbering
I try to include an entire pdf file with pdfpages but I will not use numbering in the table of contents. Here is a MWE, which illustrates the problem.
\documentclass[a4paper]{scrreprt}
...
4
votes
4answers
137 views
Numbering of Questions in Different Way
\documentclass{article}
\begin{document}
\begin{center}
Exercise-1
\end{center}
\begin{enumerate}
\item 1st question.
\item 2nd question.
\begin{enumerate}
\item sub numbering of 2nd ...
3
votes
1answer
88 views
subfloatrow: incorrect continued numbering
I am using the subfloatrow environment (provided by the floatrow package) to organise the layout of figures for my thesis. For the MWE provided below, the numbering of the sub-figures in the second ...
2
votes
0answers
41 views
Wrong Subsubsection numbering [closed]
I have changed all headings to be indented by the same amount.
\titleformat{\section}
{\bfseries}
{\makebox[1cm][l]{\thesection}}{0cm}{}
\titleformat{\subsection}
{\bfseries}
...
1
vote
1answer
134 views
Get rid of the word “equation” in cross references
I'm using the thesis template that comes with LyX and whenever I make a cross reference for an equation it comes along with the word "Equation XX.YY" and I just want the number "XX.YY".
The document ...
0
votes
0answers
66 views
Use \tag for tables and figures [closed]
How do you use the answer suggested here:
Override default equation numbering in Beamer?
on table and figure numbering?
1
vote
2answers
98 views
Equation number not on the extreme right?
I am trying to number the equation in my thesis. All of the equation numbers are being displayed correctly on the extreme right (of the text area). However, in one equation, I am facing a little ...
1
vote
1answer
40 views
Format a 'sectioned' counter individually
I have a set of different types to include figure-like items in a document. These include a float (created by \SetupFloatingEnvironment), a non-float and full-page environments/commands.
While the ...
2
votes
1answer
57 views
numbered sublist
Here is what I want to do -
1. List 1
1. sub list 1
2. sub list 2
I tried doing this,
\begin{enumerate}
\item List 1
\begin{enumerate}
\item sub list 1
\item sub list 2
...
3
votes
1answer
187 views
Smartly omit chapter number in equation numbering
In my thesis I use chapters, sections and subsection. I like to have my equations numbered with respect to section, but I want the displayed equations numbers not to include the chapter number. ...
3
votes
1answer
56 views
Initial and final chapters appearing in the table of contents without numbering
I'm editing a document whose preamble starts with
\documentclass [12pt, a4paper]{extbook}
I wish the chapter 'Introduction and its sections' appear in table
contents at the beginning of the text ...
5
votes
1answer
61 views
Parts numbering in Proofs
I am using proof environment from amsthm to type proofs. Some proofs are long, so it would be nice to split them into numbered parts. I have defined new theorem environment called proofpart for that ...
5
votes
1answer
74 views
How to skip an \item in sub-enumerate level
I would like to skip an \item in a sub-enumerate level. More specifically, I want the output to look something like:
1.
a)
b)
e)
f)
etc.
2.
However, when I use ...
4
votes
1answer
70 views
Using amsthm to number examples - how do I account for altered examples (i.e. 1', 1'', etc.)
I have sought long and hard for a solution to this and experimented with a combination of http://tex.stackexchange.com/a/43351 and http://tex.stackexchange.com/a/443, but could not get it to work.
I ...
2
votes
1answer
161 views
Changing Chapter Number to have Two Numbers
I am working in the book class, and currently I have
\setcounter{chapter}{10}
\renewcommand{\chaptername}{Lecture}
Which generates
Lecture 11
How do I make it say,
Lecture 11-12
or
...
6
votes
1answer
90 views
section numbering format
I am trying to format a legal document so that it follows this format.
Article 1.
1.01 First section
bla bla bla
1.02 Second section
bla bla bla
etcetera.
I tried using this to get ...
6
votes
1answer
90 views
Equation Counters in and outside Theorems
I am trying to setup the counters so that the equations and theorems increment by section and there is no overlap between equation and theorem numbering. I also would like to be able to number ...
0
votes
1answer
264 views
\addcontentsline: lines added to TOC not numbered, and lines added to TOT not shown
Two problems arise when I add lines to the table of contents (TOC), and to the table of tables (TOT):
The TOC lines are not properly numbered.
The TOT lines don't show on the TOT.
Any idea how to ...
3
votes
2answers
78 views
Optional argument to \item to appear in brackets after the counter
Usually, when you have the following document:
\documentclass{article}
\usepackage{enumitem}
\begin{document}
\begin{enumerate}
\item Mary
\item[had] a little
\item lamb
\end{enumerate}
...
