{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.

learn more… | top users | synonyms

9
votes
1answer
4k views

Remove dot after appendix numbering

I want my appendix section numbering to look like this Appendix A Section one B Section two I've figured out how to get the A and B (see question How to modify the appendix chapter numbering?). But ...
5
votes
2answers
9k views

Automated overlay specification with \only and \enumerate

Sometimes, when a list of items is too long to fit on a slide, I do the following to achieve a somewhat better result (ignore commented lines for now): \documentclass[t,10pt]{beamer} ...
4
votes
3answers
2k views

Enumeration of footnotes wrong

I have a small table, where I need a footnote and after it a text with another footnote. So I researched for it and found out, that I shall use \footnotemark in combination with \footnotetext in the ...
4
votes
2answers
640 views

How to configure theorems depending on the document class?

I would like to have \newtheorem{teo}{Teorema}[chapter] if the book class is loaded but \newtheorem{teo}{Teorema}[section] if the article class is loaded. Can I do this with some sort of ...
15
votes
1answer
430 views

How to number chapters as “x.0”

The default numbering for chapters is this: 1 Chapter 1.1 Section What I want is this: 1.0 Chapter 1.1 Section However, if I add the zero to \thechapter, what I get is this: 1.0 Chapter 1.0.1 ...
7
votes
1answer
251 views

Numbering multiple paragraphs at once

I am drawing up a document that has numbered paragraphs. 1-36 are numbered normally and I have no problems. However, on paragraph 37, I need something like: 35 Normal paragraph. 36 ...
10
votes
3answers
6k views

Resetting theorem counters: \section and (missing) \subsection

Suppose I define a new theorem "Theorem" and declare that its counter should be reset whenever the subsection counter is incremented or reset: \newtheorem{theorem}{Theorem}[subsection] At some ...
1
vote
2answers
211 views

Automatic subsection enumeration

For our math lectures I have been hard-coding paragraphs like \paragraph*{Definition 1.1.1 (foo)} \paragraph*{Example 1.1.2} \paragraph*{Proposition 1.1.3} and I want to create new commands like ...
4
votes
2answers
2k views

Resetting newtheorem counter

This one is probably straightforward, but I'm not missing something with the newtheorem environment and using newcounter. I would like a new environment on its own counter like "Environment M.1", but ...
1
vote
2answers
341 views

How to add a sequential number on the right hand of a mathematical formula?

I often use $$...$$ to write mathematical formulae. I would like to know how to add a sequential number on the right hand of the formulae. I want them to be right adjusted at the right edge of the ...
3
votes
1answer
600 views

How to center the tag for a multiline diagram?

I have a diagram, say five lines, the tag (equation numbering) is in the first line, this is not I want. How to force the tag stay in the middle line? Thanks in advance!
9
votes
1answer
3k views

Biblatex enumerating sorted bibliography (using authoryear-ibid style)

How can I set biblatex to insert "1. " before first bibliography item and so on? The bibliography is sorted by author and the numbers are not meant to be used anywhere else.
14
votes
4answers
16k views

How to add a dot after the section number?

I wonder is there any way to change the format of section numbering from 1.1 to 1.1. ? I know this is trivial, but I really need to add one more dot after the section number. Does anybody know how to ...
2
votes
1answer
548 views

Behavior of starred section in beamer

In a LaTeX article, \section* behaves like this: \documentclass[12pt]{article} \begin{document} \section*{Not numbered} \thesection % --> 0 \section{Numbered} \thesection % --> 1 \end{document} ...
3
votes
2answers
210 views

How to number the chapter of references and appendixes in Table Of Contents

Partial code of my main file: \pagenumbering{arabic} \setlength{\headheight}{12pt} \pagestyle{plain} \include{chap1} \include{chap2} \include{ch3} \include{Experiment} % Extract Correlation ...
7
votes
2answers
1k views

How to not increment algorithm numbers when using \againframe in beamer

As is known, algorithms and equations in latex are automatically numbered. When using \againframe though, incrementing such number is undesired. How to avoid this? (I still want numbering, but it will ...
3
votes
1answer
5k views

How to control figure numbering in Lyx

I have a single figure in a Lyx document, and it is part of a paragraph which itself is part of a section. It is expected that Lyx will produce a caption for it as 'Figure 1: ....', however, the ...
3
votes
2answers
2k views

List of figures without figure numbers

How can I create a List of Figures which has captions and page numbers, but no figure numbers?
5
votes
1answer
241 views

Same name for all appendices

I have a problem with Appendices. I include them all in one big file. Here I include chapters and after including chapters, I include appendices as follows: \begin{appendices} \include{appendixA} ...
5
votes
1answer
262 views

Shortened page-ranges from \pageref

In some typographic conventions page-ranges are shortened to save space, e.g. writing "1234-35" or even "1234-5" instead of "1234-1235". I would like to have a \pageref{foo}--\pageref{bar} ...
4
votes
3answers
2k views

Having the starred version of a theorem environment unnumbered - with ntheorem

I'm trying to switch from amsthm to ntheorem. (This is due to the incompatibility of amsthm with babel+Hebrew, see here and here; seems not to have been resolved.) I would like to have both a starred ...
15
votes
3answers
5k views

Footnote number in braces / parentheses

I have written my dissertation with LaTeX, but my teacher has suggested to put the number of footnotes in braces / parentheses. I thought it would be easy, but I haven't found the answer anywhere! I ...
8
votes
2answers
391 views

French chapter numbers

This question led to a new feature in a package: impnattypo French typography recommends that chapters be numbered in uppercase roman numbers, except for chapter 1 which should be called ...
8
votes
4answers
1k views

How can I automatically abbreviate page ranges in citations (biblatex)

I am using biblatex for my citations, and I was wondering if there was a way to automatically abbreviate the page ranges in citations. (The reason I ask is because I have them all in long-style, and I ...
9
votes
4answers
6k views

How can I produce an unnumbered chapter for the introduction?

If I did \setcounter{chapter}{-1} \chapter{Introduction} then I get Chapter 0 Introduction. I just want the word Introduction, and I want it also in the contents when I use \tableofcontents How ...
16
votes
2answers
15k views

Table numbering mismatch in caption and in text

I have created 2 tables in my LaTeX document \begin{table}[hb] \centering \begin{tabular}{|c|c|r|} \hline ... not important... \end{tabular} \label{tab:2} \caption{Določanje prioritet mojstrov ...
3
votes
1answer
274 views

Creating duplicate numbering for theorems

A conference I publish at has a strange requirement. In the first X pages (X is not important here), we are required to provide an extended abstract of the work, and then after that, we must attach a ...
1
vote
2answers
573 views

koma book chapter number with trailing .0?

By default, KOMA-Script scrbook produces chapters numbered like "1. Introduction". How can I get a chapter numbered like "1.0 Introduction"?
2
votes
1answer
110 views

How can I include bibliography into numbering?

\documentclass[12pt,a4paper]{mwrep} ... \chapter{First chapter} ... \chapter{Another chapter} ... \begin{thebibliography}{999} ... \end{thebibliography} I have in ToC: 1. First chapter ....... 1 ...
2
votes
1answer
144 views

Numbering and cross-references

I am writing a large document (guess what) with chapter, section, subsection, subsubsection (and paragrph). I have changed the numbering to fit my taste: \setcounter{secnumdepth}{3} % Number ...
8
votes
1answer
752 views

Changing the format of ordinal numbers (\the…) and related strings

I develop a package that improves LaTeX support for the Latvian language. One of the things I have here is different style used for things like Chapter 1, Theorem 1.1 etc. First, the phrase is written ...
14
votes
2answers
20k views

One chapter without numeration

How can I make one chapter (Introduction) without number? I have: \documentclass[12pt,a4paper]{mwrep} \chapter{Introduction} \chapter{Chapter 1} \chapter{Chapter 2} In ToC I have: ...
3
votes
1answer
650 views

Each chapter with own contents? [duplicate]

Possible Duplicate: List sections of chapter at beginning of that chapter I'm wondering whether its possible to have each chapter of a thesis with its own contents page? I tried it ...
3
votes
1answer
556 views

“section level” appendices

I am writing my thesis using a document class that has chapters and then sections under them. Because the chapters are about pretty unrelated topics, I'd like to put the appendices at the end of each ...
8
votes
2answers
2k views

Adjusting the postion of chapter numbers in the Tufte-Latex class

I'm using the Tufte-latex book class, and trying to figure out how to use numbers in the chapters/sections. The default style has no numbers, which I turned off by commenting out this line: % Turn ...
4
votes
1answer
572 views

How to include the subsection numbers when using the algorithm2e package?

I am using the package algorithm2e. By default, the numbers of the algorithms either related to part, chapter or section. what I want is to get the following numbering for the algorithms: ...
3
votes
2answers
2k views

Manually set figure and table labels while compiling

I would like to manually set certain figure and table labels in LaTeX2e. I imagine the process to go something like: latex -> edit .aux file (?) to revise some labels -> pdf The problem: the apa6e ...
4
votes
1answer
6k views

Acknowledgement page + report

I'm writing a report and I want to place the Acknowledgement page without \section because it will number it 0.1 I tried to place it in another TeX document and use \input in the main document, but ...
2
votes
1answer
671 views

Varying style for chapter-references

I would like to refer to a chapter (roman numbering) partly with arabic numerals (e.g. as part of equation numbers) and partly with roman numerals (e.g. when refering directly to the chapter) ... ...
6
votes
2answers
13k views

How to modify the appendix chapter numbering?

I have: \appendix \chapter{Title} \section{Intro} and it appears. Appendix A Title A.1 Intro I would like to have the same except the "A.1 Intro" but instead "1.Intro" How to remove the ...
1
vote
4answers
5k views

How can I label subfigures sequentially with positive integers across figures?

I want to label subfigures, across many figures, with sequential positive integers. For example, the first figure may have two subfigures with label tags {fig1:subfig1} and {fig1:subfig2} and the ...
6
votes
2answers
2k views

Enumerate subsection, but don't print at TOC

what I try to achieve is the following: I want all subsections in the appendix have 'normal' numbers (as they currently have), but I don't want them to be displayed in the TOC. When using ...
11
votes
2answers
1k views

How do I make a Theorem n followed by a Theorem n' ?

I am writing a paper where I have a stated a theorem, and then a short time later I state another theorem which is equivalent to the first. Is it possible to number them so that the second is a primed ...
7
votes
5answers
7k views

Appendix without sections ?

There is only one appendix chapter in my thesis, which Latex defaults as Appendix A. However, I need it to show up as only "Appendix" without A or 1. Can anyone please tell me how to achieve that. ...
18
votes
3answers
9k views

Automatic table row numbers

Is there any way to get automatic row numbers in table? For example, if I define table contents as \begin{tabular} % black magic column definition \rownumber & foo\\ \rownumber & bar\\ ...
2
votes
2answers
792 views

Table of contents, arabic numbering & indentation

I use this document class: \documentclass[a4paper,12pt]{article}. Can someone please help me to form such style of table of contents. I need: the arabic numbering everywhere in the toc (now "parts" ...
2
votes
2answers
266 views

can I fix the following problem with multiple theorem statement?

I am using the theomac.sty file for being able to have the same theorem appear in several different places in the .tex file without having to copy it, and while still having the same numbering (so for ...
2
votes
2answers
3k views

Using non-numeric ((sub)sub)sections changes the way of how \ref is displayed

I have some issue with LaTeX and I haven’t found a solution yet. So hopefully some of you can help me. I'm writing a big article with four levels of sectioning (so I'm using paragraph for the lowest ...
5
votes
2answers
2k views

Section numbering with chapter in amsbook

I'm using amsbook to write a report. I'm using \chapter{}s and \section{}s, and their numbering is fine. However, \section{}s are numbered sequentially inside each \chapter{}, but without the ...
8
votes
1answer
3k views

How to change “Listing 1. Caption” to “Figure 1. Caption”?

I have a listing like so: \lstset{language=Python,caption={Caption}} \begin{lstlisting} some Python code goes here \end{lstlisting} In the PDF this appears as Listing 1. Caption. How can I make it ...