{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.
10
votes
5answers
144 views
Wrong reference number for subfloat
I am trying to reference a subfigure in my text but it is numbered incorrectly.
Here is a minimal working example:
\documentclass{scrartcl}
\usepackage[demo]{graphicx}
\usepackage{subfig}
...
1
vote
0answers
42 views
Add a fixed letter to all equation numbers [duplicate]
I am working on a supplementary for an article and I want the equation in this supplementary to have the letter "S" before the numbers of the equations (i.e. equations (S1), (S2), etc, instead of (1), ...
3
votes
2answers
88 views
Creating independently-numbered Chapter-level structures
I'm writing a book in which, between chapters, I may have chapter-size chunks of text that discuss a software package related to the book's content. Consequently, I wish to label these things ...
2
votes
2answers
77 views
How to remove the chapter number from section number? [duplicate]
I use Roman for Chapter numbers, and I don't want sections to be numbered as VIII.2 (while I still want sections to be numbered within chapters). How do I do that?
i.e. instead of VIII.2 sections ...
2
votes
1answer
260 views
About numbering of figures and tables in appendix {elsarticle.cls}
When I am using elsarticle.cls to write papers, I always meet the following problem. If I already have one picture (table) in main text and then I put another picture (table) in appendix, the ...
3
votes
1answer
223 views
Multibib: how to reset references counter?
Im using a complex template to write my document. It is old and I'm having a problem. I have two separate reference list, "Internet References" and "Literature". The problem is that the references ...
1
vote
1answer
62 views
Counters for claims
I want to redefine the claim environment so that it will be numbered but I'm having a hard time with the counters.
I want the following:
\begin{theorem}
thm 1
\end{theorem}
\begin{proof}
...
10
votes
1answer
217 views
Bad position equation number Lualatex
If a math display is too wide, then the \eqno appears on the next line on the left instead of on the right as it should. Does anyone know how to solve this problem? This is an example:
...
8
votes
2answers
103 views
Consecutive caption numbers without chngcntr?
As many before me I need consecutive caption numbers for figures and tables instead of chapter-based numbers like Figure 1.2. I use scrreprt and the caption-package for my document. I also need roman ...
1
vote
1answer
164 views
Exam (not exam class) with LaTeX
I would like to do an exam with LaTeX. I want to use the srcartcl class and the exam itself is ready. But I like to have a number as a unique identifier for the students. So, for 60 students, I like ...
2
votes
1answer
177 views
Reverse numbering in biblatex bibliography with different categories
I have different categories (filters) for entries in a bibliography using
biblatex (see below). I would like to add a numbering to the entries. Since the
entries are sorted by year in decreasing ...
0
votes
1answer
78 views
LaTeX commands for centering the equations without numbering them [duplicate]
What LaTeX commands should I use to center the equations on the page, but without numbering them?
0
votes
0answers
38 views
Figure counter and figure label issues [duplicate]
i ve got an issue with Figure counting and, i think, labeling. Though I set the counter for figures at 0, my first figure, that I d like to have counted as 'Fig.1' and that is labeled as ...
2
votes
1answer
95 views
Is there any way to make two pages per sheet (landscape) and the page numbering appears as if each column was a page?
I want to make a landscape sheet with two pages (like two columns) and I want that the page numbering to be a number per page (a number per column) instead of a number per sheet.
I use ...
1
vote
1answer
177 views
Equation numbering problem, `alignat`
When using the alignat environment I encounter a strange equation numbering problem. It's rather hard to describe, but here is an MWE. I describe the output below.
\documentclass[]{memoir}
...
2
votes
1answer
156 views
How to automate the \label-ing of equations?
I'm not sure if the way LaTex works allows for automatically labeling of, for example, align environments. This would require that the environment has an internal counter. However, when placing an ...
3
votes
1answer
137 views
Numbering of subsections in the appendix
I trying to write an appendix where:
The appendix is considered a section, and has the title "appendice"
Subsections are numbered with letters (it does it for sections by default)
but I can't get ...
1
vote
1answer
104 views
Subsections without numbering in ToC and document
I have a table of contents which I want to modify. I want subsections without a number, in the document and the ToC.
I'm using memoir.
\documentclass[12pt, a4paper, makeidx]{memoir}
I have the ...
0
votes
1answer
52 views
How come the numbering of my section titles is coming as 0.1.x and not 1.x etc
I am using a thesis package given by my university. Surprisingly the section numbers of thesis are coming as 0.1, 0.1.1 and not 1, 1.1 etc. Please see this pdf and this main tex file
I will be ...
2
votes
1answer
110 views
How to reset sidenote numbering in chapters? (Tufte-LaTeX)
I've looked at this question:
How to reset footnote numbering at \chapter* and at frontmatter chapters?,
but the answers concern using \chapter*, and assume the OP is not using the Tufte-LaTeX ...
4
votes
1answer
81 views
Reverse numbering of bibitems — moderncv and plainnat
I want to number bibliography items in the reverse order -- with moderncv and plainnat bibliography style. A picture of what I want:
Reference:
Enrico's answer at: Bibtex reverse numbering
I ...
1
vote
1answer
97 views
Enumerate and numbering
We are using the enumerate in the following form
\begin{enumerate}[leftmargin=*,label=\bfseries${\textbf{{C}}}_\arabic*$.]
\item
\end{enumerate}
Which produces out-put as C_1, C_2, ...
But we ...
2
votes
1answer
122 views
endfloat and \Continuedfloat: incorrect numbering for place holders
When I use endfloat and \ContinuedFloat, the table place holders that endfloat puts in don't have the correct numbering (while the tables themselves do). For example if I have a float and another ...
1
vote
0answers
100 views
How can I add a number to an equation sometimes on the left and another time on the right and refer to it afterwards?
How can I add a number to an equation sometimes on the left and another time on the right and use a tag command to refer to it afterwards? I will use in the document a number on the right side.
For ...
2
votes
1answer
57 views
Numbering equations within dynblocks environment
I'm trying to number an equation inside an environment created for customed blocks with equations like those contained in how to adjust the latex beamer block width to the size of its content?. But I ...
5
votes
1answer
61 views
Change from “Theorem 10.1” to “10.1 Theorem” [duplicate]
Possible Duplicate:
Numbering theorem-like environments">Numbering theorem-like environments
How can I change the order in which theorems are displayed? I want 10.1 Theorem and not Theorem ...
1
vote
0answers
82 views
Fitting equation inside a column
I am using twocolumn revtex mode, and for my matrix to fit inside the column I used this 'trick'
\begin{equation}
\resizebox{1.\hsize}{!}{
\bordermatrix{~ & \tau & r & \theta & ...
2
votes
1answer
193 views
Numbering a “new theorem”
I have a (simple?) question. I use the ams theorem environment for most of my theorems, but I want to box my definitions and find here a nice way to do it, simpler for me than mdframed. My problem is ...
1
vote
1answer
93 views
Subfigure numeration inside the section [duplicate]
Possible Duplicate:
Numbers of figure references
I'm having some problem about subfigure numeration.
The figures in my work are numbered inside the section using the line
...
5
votes
2answers
275 views
The numbering of exercises automatically on table
I have several hundred exercises in form
\begin{exercise}
\end{exercise}
where each one is a small own file.
I input those through \input{...} on master documend.
I have done some other ...
2
votes
1answer
87 views
Numbering in revtex4
I use revtex for my paper, and the sections are numbered as I. II. (roman), but when I use \numberwithin{equation}{section}, I get sth like (I.1), but I'd like it to be like (1.1), I looked around but ...
0
votes
0answers
158 views
\appendix doesn't use letter, but still numbers [closed]
I'm try to insert an appendix on my thesis, but the command \appendix seems just to be ignored! In fact, after it chapter are still numbered!
Here is the minimal working example:
...
0
votes
0answers
24 views
Memoir, section numbers without the chapter number [duplicate]
Possible Duplicate:
How to leave out chapter numbers in section numbering
I'm setting a book with memoir. For sections (and below) I get the chapter number, plus the section (or sub-. etc.) ...
3
votes
2answers
83 views
Excluding the number that appears before sections and using roman numbers in table of content
Whenever I have \section{something} a number appears before it, like
1.Something
How can I exclude this number?
And for table of content, I have something like
\setcounter{tocdepth}
...
2
votes
1answer
62 views
roman numbering for few sections [closed]
I have some attachments in my document and I would like to number them with a roman style.
How can I do this?
I tried:
\documentclass[12pt,a4paper,oneside]{book}
\begin{document}
...
4
votes
2answers
111 views
Numbering of subsubsections: “A.” in number, “1.1.1.A” in references
I'm quite new to Latex and I'd like to achieve the following thing.
I want my document to have the following numbering structure:
1. chapter
1.1 section
1.1.1 subsection
A. subsubsection.
(In ...
4
votes
1answer
405 views
Adding slide numbers in the footer of beamer documents
I am using the Dresden theme, which by default it gives me two lines at the bottom of the every slide, the first one containing the author name on the left and the institute name on the right, the ...
0
votes
1answer
81 views
adding acknowledgement in .tex file [duplicate]
Possible Duplicate:
Creating unnumbered chapters/sections (plus adding them to the ToC and/or header)
I want to thank my professor with mention in my LaTeX document, so I need to add a ...
5
votes
2answers
114 views
Footnotes being rendered as letters inside tabular
I wrote a couple of footnotes inside a table using minipage, but they are rendered as letters instead of numbers. I couldn't find anything about it in Google. I tried using
...
6
votes
1answer
80 views
Caption number increases by two for every inclusion
I am trying to typeset my captions in margin using marginpar and captionof. Here is what I get by the MWE. Note the wrong caption numbers.
The first caption is included using macro \fixedmarginpar ...
3
votes
1answer
137 views
Latex: Running table number
There are several tables in my paper, out of which one table is very long and need to be place on landscape page. This is my Table.4 and I want to put it on the last page. For that I used \setcounter ...
5
votes
1answer
80 views
Change listing number separator
I am working with the listings package and trying to change the separator from the default period to a hyphen. However, I cannot seem to figure out how to.
I tried the code snippet below, but it ...
3
votes
1answer
128 views
algorithmicx, broken left align with custom numbering
I am trying to use the algorithmic package with Step1. Step2. instead of 1, 2, ... line numbering and I have numberless lines. An example:
\documentclass[11 pt]{report}
\usepackage{algorithm}
...
0
votes
0answers
38 views
Numbering section: “1” instead of “0.1” [duplicate]
Possible Duplicate:
Section numbering
I have a problem with my numbering in LaTeX. When I do
\section{foo}
the result is
0.1 foo
and what I need is
1 foo
Does anyone have a ...
4
votes
1answer
165 views
How to display Arabic numerals with \ref but Roman numerals otherwise?
To show all chapter numbers as Roman numerals, I’m using
\renewcommand\thechapter{\Roman{chapter}}
The fourth chapter, for instance, is therefore “Chapter IV” everywhere.
Is it possible to show ...
5
votes
1answer
69 views
How to get the References section to be numbered as if it were created via \section
I am using the bibtex library to reference. Everything works fine but ideally I would like the reference section generated by bibtex to have the ordered number like \section{} generates.
For ...
7
votes
1answer
142 views
custom automatic equation numbering
I just read a book where the equations in the Introduction were numbered slightly differently compared to the other sections, namely by (In.x) where x stands for the number (so it starts off as ...
18
votes
1answer
186 views
Unusual numbering: combine alph, Alph, arabic
I would like to have an unusual numbering aAa going as follows:
0 -> *
-------------------------
1 -> a
2 -> b
...
25 -> y
26 -> z
-------------------------
27 -> A
28 -> B
...
6
votes
2answers
103 views
Defining shared counters for theorem environments *after* environments are defined
I am trying to use the same numbering for theorems, propositions, definitions, etc. This is normally easily be solved by using amsmath and defining these environments and using the same counter:
...
3
votes
1answer
121 views
Changing the mark of endnotes
I am using both footnotes and endnotes in a chapter with the help of the endnotes package.
However, both footnotes and endnotes are numbered by Arabic number.
I would like to keep the Arabic numbers ...
