{numbering} is about numbering document elements. Use this tag in addition to other tags specifying what should be numbered (or have its number removed). For {page-numbering} or {line-numbering}, use the respective tag instead.

learn more… | top users | synonyms

4
votes
3answers
135 views

Equation numbers are shown in reverse parentheses

I am using \begin{equation} a = b \end{equation} to write the equations in my paper. However, the problem is that the number related to each equation is not shown in the correct format like the ...
0
votes
1answer
46 views

Labels on left in align environment [duplicate]

I am using the align environment, but wish my numbering of equations to be on the left-hand side of the page. Is there an easy way to do this?
5
votes
1answer
97 views

Two different numbering styles for equations in the same document

Earlier in the document, there's some equations labeled like this: (1) (some space) \frac{1}{/2}=0.5 (2) (some space) hi Now, I want to do something like this and switch the equation number and ...
4
votes
3answers
609 views

Interrupting and resuming subequations

As the title states I would like to interrupt and resume a block of equations that is inside a subequations regime. My problem arises when the interrupting stuff shall contain equations on its own: ...
4
votes
1answer
121 views

Changing Number Font Into Sans Serif

I want to use Libertine Sans Serif numbers (only numbers) in math font. Can i get this result using a command like this: \DeclareSymbolFont{numbers}{T1}{libertine}{m}{n} ...
19
votes
2answers
7k views

Beamer Presentation: Figure has no number?

I am giving a presentation and therefore I am using the beamer class. I have included some figures and it works, but there is no number after "Figure". My code: \documentclass{beamer} ...
9
votes
1answer
5k views

\section{} results in 0.1, not in 1.0

I'm having a bit of trouble with section numbering. When I use \section{} it starts at 0.1 rather than 1.0. Here's my preamble: \documentclass[12pt]{report} \usepackage{hyperref} ...
2
votes
0answers
32 views

Sections are labeled as 0.x in the output [duplicate]

This is probably a very basic question, but I am new at this. I am using \section{} to create a new section. Latex labels it as 0.1. How can I get it to label it as 1.0? \documentclass{report} ...
6
votes
2answers
91 views

Different alphabet with \alph

My language (Slovenian) uses a different alphabet that starts with a, b, c, č, d. I have the correct babel settings but \alph{} numbering still gives me a, b, c, d. \documentclass{article} ...
6
votes
3answers
3k views

LaTeX locally change equation numbering

I want my document to look like this: Normal document text. equation (1) Definition Definition text. equation (D1) More definition text. Normal ...
1
vote
2answers
114 views

How to start new numeration of theorems with every chapter?

What I want? [that way of numbering] 1 How to do squats Theorem 1. Put your barbell on your shoulders. Theorem 2. Squat. 2 How to do bench press Theorem 1. Lean on a bench. Theorem 2. Push. ...
3
votes
1answer
50 views

How to change enumerate style in GSM package

I used GSM LaTeX package of AMS to write a book, in which the enumerate environment gives the result as follows: (1) If blah blah blah. (2) Else blah blah blah. (3) Or blah blah blah.... I want ...
3
votes
2answers
99 views

numberstringnum or numberstring in lowercase

I have tried a lot to use the \numberstringnum and \numberstring macros but it appears incomplete or even do not appear on the text. So I tested in the female version, like below: ...
1
vote
1answer
48 views

LaTeX is truncating my theorem reference numbers. How do I correct this?

I will have a Theorem, Lemma or Corollary and it will be numbered, say for example, 2.2.3 ... Unfortunately, every reference back to ANY Theorem, Lemma or Corollary simply state 2.2 ... It seems to be ...
3
votes
1answer
44 views

New environment type without automatic numbering

I'm trying do define a new environment using tabu as a building block. The reason to use tabu is that it will break nicely across pages for long tables. I would like to have some help on doing the ...
0
votes
0answers
21 views

How can I get continuous numbering throughout my document? [duplicate]

I have a set of solutions for my whole document. I would like to keep a continuous numbering from chapter 1 to the last chapter. Is this possible? If not, could you please suggest other option? ...
6
votes
4answers
116 views

Repeat and enumerate a part of document

I have 4 sets/groups of exam questions. I want to enumerate them from 1 to a number of persons. Because a number of students exceed 4 I must repeat the sets. If I had 40 students therefore I would ...
9
votes
3answers
159 views

Making the “Part 1” disappear in \part format

I am making a bank of exercises for a course. To do this, I use the exam class, which uses the same sectioning as the article class. To do this, I have a separate .tex files with the questions, ...
7
votes
1answer
165 views

Use numbers of ttfamily

I like the lining figures of the \ttfamily. I would like to use them within math mode, as equation numbering and within tikzpicutres. Concerning math mode, I use amsmath and could display numbers ...
1
vote
0answers
19 views

No section number and title be printed in PDF output in LaTex [duplicate]

I am using documentclass{book} to write a thesis. All my tables and figures go into the appendix, which consists of two chapters: one is Tables, another is Figures. And there are several sections in ...
3
votes
1answer
86 views

How to not display chapter number in section number (titlesec)

I'm using titlesec to manipulate title and section and other. Here is what I'm using: \titleformat{\chapter} [frame] {\normalfont} {\filright \footnotesize \enspace LP \thechapter ...
5
votes
1answer
133 views

Enforce 2-digit citation numbers?

I need citation numbers to be at least two digits. So, any number less than 10 needs to be prefixed with a zero: [01], [02] ... [10] Is it possible to that in bibtex, or any other citation package? ...
4
votes
1answer
68 views

multiple equations in a single line, numbering problem

I have two relatively short equations which I want to fit in one line. Using the multicols and miniage I am getting : equation1, (1) equation2. (2) The numbers are on the right side of each ...
2
votes
0answers
30 views

Multiple tags in one line of align environment [duplicate]

Is there a possibility to tag each equation of a single line in an align environment of the amsmath package? Like so (this code leads to the error Package amsmath Error: Multiple \tag.): ...
43
votes
8answers
9k views

How do I repeat a theorem number?

Often in my papers I want to mention theorems in the introduction that are introduced in more detail and proved in a later section. I'd like to include the statement of these theorems twice over, ...
2
votes
2answers
73 views

Using the same counter as defined in an amsthm environment

I use the amsthm package to define enviroments for lemmas, theorems, etc. They all share the same counter. Using \newcommand I defined a macro for computational problems (name, input, output). I want ...
10
votes
5answers
3k views

Moving the equation number up

In what's below, the equation numbering is annoying and forcing it to move up would be a solution. Anyway what are your suggestions to fix this without modifying the equations? ...
6
votes
2answers
184 views

check order of references to floats

I want to make sure that the references are in in the order of the appearance of floats. I.e. I do not want to change the order of the floats but I want to avoid the situation: ... shown in figure ...
2
votes
1answer
77 views

How to change the theorem counter, theorem name in a specific case

I have used GMS class to write design a math book. In that book, the author has a special theorem, as following: \documentclass{gsm-l} \newtheorem{theorem}{Theorem} \newtheorem{lemma}[theorem]{Lemma} ...
2
votes
1answer
123 views

Starting Numbering of Footnotes in Minipage at 1

If you don't use any additional code, the footnotes in the minipage environment will continue with the number of the last footnote + 1. Is it possible to start footnotes with an arabic 1 again in a ...
3
votes
1answer
49 views

How to customize the number of one frame on beamer

How to set a number of one frame on beamer, please? I've tried this : \setcounter{page}{19} But it wouldn't work. Any brilliant idea, please? Thanks a lot!
2
votes
1answer
41 views

numbering paragraph in each section

I wish to number the paragraph in each section, the number format is like (section number, paragraph number). for example Section 1 1.1 subsection 1.2 subsection (1.1) blah blah paragraph (1.2) ...
6
votes
3answers
118 views

How can I number theorems in introduction without section counter and later with it?

I would like to have my theorems numbered in the following way. Theorem 1. Blah-blah Theorem 2. More blah-blah Section 1. Theorem 1.1. Special blah Theorem 1.2. More special ...
3
votes
1answer
76 views

Placing a tikzpicture next to an align and add an equation number

I want to place a tikzpicture next to an equation and equip both of them together with an equation number. The reason is that the tikzpicture is a kind of explanation (visualization) for the equation. ...
0
votes
1answer
39 views

label separator between the section number and title to 0pt

I'm writing my thesis using mitthesis class. However, the numbering of the sections and subsections is not what I want. Right now my document has this numbering, but the 0 in X.0.X and X.0.Y should ...
19
votes
3answers
27k views

Number subsections and subsubsections, but not sections

I'm working on an article and I don't want to number my sections. However, I do want my subsections and subsubsections to be numbered. Right now my document has this numbering, but the 0 in 0.X.Y ...
4
votes
1answer
70 views

Numbering in SVJour document class

I am using the SVJour document class for a paper I am currently writing. The default numbering scheme is as follows: Theorem 1 Corollary 1 Theorem 2 Proposition 1 Example 1 etc. Which is ...
4
votes
2answers
77 views

Start table number in whole digits for each chapter seprately

I want to show table number starting from 1 to so on seprately on each chapter. I am trying to use setcounter, but its not giving the desired results. \documentclass[english]{book} ...
4
votes
3answers
197 views

How do I split large numbers into groups of five digits? [duplicate]

I need to split a number of 27 digits into groups of 5 digits. I already had a look at siunitx, telprint and numprint. But these just allow me to generate groups of two or three digits. Is there any ...
1
vote
1answer
70 views

LaTeX Numbering in Counters Appears to have Changed

I work on a project called OpenIntro (http://openintro.org), and we have created custom numbering for tables and figures within an open-source textbook so that tables and figures use a common counter. ...
1
vote
2answers
92 views

A framed theorem without numbering?

Is it possible to draw a frame around a theorem-like environment ? If possible, I would like to use mdframed. In the documentation, the general form of the command is given by ...
0
votes
0answers
37 views

Discontinuating subenvironment in {philex}

I have to print a example in two parts with philex, like the following : (1) a. First line Some text. (1) b. Second line c. Third line. It does not look very hard to do, so I bet I'm missing ...
2
votes
2answers
95 views

How to add dot after \section number in headline and ToC, without adding dot to \ref command

I need \section (\subsection, \subsubsection ...) titles printed with dot after numbering. Example: My Title For this purpose i use: \renewcommand\thesection{\normalfont \arabic{section}.} ...
3
votes
1answer
66 views

Positioning equation number not working

In this example the equation number is even below the equation itself. I thought a [t] of [m/c] option could position the number. Doesn't work. How can I get the equation number to be at the top, ...
9
votes
2answers
144 views

Incorrect reference to the equation number in algorithm2e

I want equation number in an algorithm with chapter number included. Here is my code. \documentclass{book} \usepackage{amsmath,amssymb,amsthm, latexsym,float,epsfig,subfig} ...
3
votes
1answer
131 views

“Literal” and numerical numbering of chapters

I ask another question related to this one "Literal" numbering of chapters but not in contents which was not "precise"... This question is the exact one, with an example... This example ...
6
votes
1answer
73 views

Want theorem and equation numbering linked under section

Similar questions have been answered but the solutions didn't seem to give what I need. I would like theorems and equations both to proceed as follows within each section. Say we've begun Section ...
37
votes
1answer
33k views

How to change the numbering of \part, \chapter, \section, … to alphabetical, Roman numbers, etc

I'm fairly new to LaTeX and I want to know how to change the way sections are numbered by default. I use LyX, and there it is relatively simple to change the way an enumeration is numbered, i.e. 1 ...
4
votes
1answer
51 views

\ref counter for equation off by one for labels in align environment

I'm having an issue where the \ref command typesets a number 1 higher than it should be for equations in align; equations are numbered correctly but the references are off.A \ref call to the last ...
4
votes
1answer
49 views

Is it possible to hide chapter numbering for non-chapter headers and TOC listings

I'm writing an edited collection of essays using a Scrivener-MMD-latex workflow (using the memoir class) and would like to hide chapter numbering for all items that aren't actually chapters. Here's a ...