6
votes
2answers
379 views

How to put one circle over another?

This is my code: \documentclass[tikz,12pt]{standalone} \usetikzlibrary{patterns} \begin{document} \begin{tikzpicture}[line width=1.5pt] \coordinate (A) at (2,2); \coordinate (B) at (2,1.2); ...
0
votes
1answer
52 views

LaTeX Beamer, TikZ and overlays — page numbering issue

I'm using \onslide<…-> for overlays in TikZ: \documentclass{beamer} \usepackage{tikz} \setbeamertemplate{footline}{\insertpagenumber{}} \begin{document} \begin{frame} ...
1
vote
1answer
80 views

Graphical overlay in form of arrows (TiKZ) on subfigures in a poster (a0poster.cls)

I am trying to create a poster (right now I am using 'a0poster.cls') and I am not able to integrate subfigures overdrawn with tikz after this example by Gonzalo Medina. In this poster I am using also ...
7
votes
3answers
173 views

How to arrange a large picture on the side on the current page?

I have a decorative picture that I want to display on the right side current page. The picture should fill the whole vertical length of the text body (maybe even 1cm larger). The picture is long and ...
18
votes
2answers
466 views

Clever beamer animation? Writing a script that changes a tikz picture in beamer?

Here is a start of an answer to this "challenge": \documentstyle[beamer] \usepackage{tikz} \begin{document} \begin{frame} \tikzset{click/.style={draw}} \begin{tikzpicture}[start chain=going right, ...
4
votes
3answers
83 views

Beamer/TikZ/PGF: Applying a key only for one slide (similar to uncover or only)

I want that a key is only applied in specific slides just like uncover or only. Here's an example: \documentclass{beamer} \usepackage{tikz} \begin{document} \begin{frame} \begin{tikzpicture} ...
4
votes
1answer
159 views

Tips for effective 3-dimensional authoring: tikz, animation, and text flow

I work hard these days on writing animated graphical beamer presentation, which sometimes contain over 100 slides. I find that I need to think across three interacting dimensions: The time ...
2
votes
0answers
90 views

Using \onslide in Tikz and pgfplots [duplicate]

I am having trouble with using beamer's \onslide in TikZ and pgfplots. The issue I have encountered is that if I use \onslide then the specific parts of the picture I want to appear on a specific ...
8
votes
2answers
338 views

How to overlay tikz matrix in beamer?

Background: I encounter some unexpected situations while overlaying a tikz matrix in Beamer. The latex code is given at the end (note: you can also read and copy it at ShareLatex:TikzMatrixOverlay). ...
0
votes
1answer
73 views

Tikz nodes moves after double building

I want to plot 4 graphs in one tikzpicture in a 2x2 grid, using groupplot. Also I want to put some arrows from nodes in the first three plots to nodes in the last one. To do this, I try to use ...
1
vote
1answer
128 views

Beamer overlay specifications for a tikzpicture

Overlay specifications can be added to the TikZ commands. \node<2> (a) {only visible on slide 2}; Is this also possible for the whole tikzpicture environment? \begin{tikzpicture}[<2>] ...
2
votes
1answer
300 views

Adding tikz pictures on top of a beamer slide

What is the best practice for adding/uncover TikZ pictures on top of a beamer slide? I have tried the following approach \documentclass{beamer} \usepackage{tikz} \begin{document} \begin{frame} ...
1
vote
1answer
128 views

How to remove a frame from the total number of frames? [duplicate]

I'm using Warsaw as outer theme. I use some images in different slides to create an effect of 'image in evolution' but the problem is that I don't want that the number of slides increase with every ...
6
votes
1answer
144 views

Why overprint-environment not fix position?

I use overprint environment in beamer with two columns, when overlay it move down and the last slide has some space. How can I solve this problem. \documentclass{beamer} \usepackage{tikz} ...
3
votes
1answer
215 views

How to use only overlay between tikz picture and equation

I have a working example here. I want to display tikzpicture and equation one at a time. I don't know how to use only overlay here. \documentclass{beamer} \usepackage{tikz} \usetikzlibrary{shapes, ...
4
votes
1answer
343 views

Beamer overlays, tikz external and custom file name

This is a follow-up question from Use tikz external feature with beamer \only . Andrew's answer there is excellent, and does the job (almost) perfectly. The rough edge I have found was when I tried ...
4
votes
0answers
213 views

Using `external` selective for TikZ-pictures

For the following example: \documentclass{beamer} \usepackage[utf8]{inputenc} \usepackage{tikz} \usetikzlibrary{calc,external} \usepackage{pgfplots} \tikzexternalize \begin{document} ...
7
votes
2answers
288 views

drawing(uncover) a curve bit-by-bit using tikzpcture and beamer and \onslide

I wish to uncover a curve (a potential energy v distance) bit-by-bit while explaining what is going on. The code below is only ok, the problem is that the curve changes shape from slide 3 to slide 4. ...
4
votes
2answers
213 views

Avoiding repositioning of minipages when moving overlayed tikzpictures

I'm fairly new to Beamer and stuck with this problem of two tikzpictures lying above two minipages. i want tikz1 to be displayed on slide 2 of the frame and tikz2 on the next slide (3). However they ...
11
votes
2answers
209 views

Successively reveal tree bottom up

I am trying build a tree bottom up in a beamer document, i.e. to draw it on screen starting from the most deeply embedded leaves. I've found a lot of Q&As and discussions on how to have trees ...
10
votes
1answer
221 views

tikzmark position erratic in overprint environment of beamer

My aim is to highlight a term in an equation, and draw an arrow pointing to another one. Here's my code \documentclass{beamer} \usepackage{tikz} ...
0
votes
1answer
247 views

Beamer overlays - how to make things appear in different places? [closed]

So I just started using beamer and got introduced to the \pause command. But I want things to show up at different places on the screen, not necessarily from top to bottom. How to do that? ...
4
votes
1answer
217 views

Uncover parts of a tree in TikZ

I'm trying to apply Daniel's method to uncover the bottom right part of the tree in the following MWE. However, when I pass the option [visible on=<2->] to one of the children, it appears to ...
4
votes
1answer
241 views

Continuing a TikZ animation with \onslide after a \foreach loop

I want to produce an animation in a tikzpicture environment in Beamer. The animation consists in a series of slides produced by combining \foreach and \onslide, which works fine. I then want to ...
2
votes
2answers
2k views

Animate movement/transition of sections on a slide in Beamer?

I'm not sure if this is even possible with the current PDF format specification, but I'd like to animate transitions between slide or between slide overlays by having part of the slide move or "fly" ...
11
votes
1answer
4k views

Tikz: overlay png or pdf image over another pdf figure

I am newbie in Tikz. I would like to place a png or pdf image on another pdf figure using Tikz overlay.Unfortunately i don't have any Tikz code for both the figures. I have looked at this answer ...
5
votes
2answers
648 views

TikZ: node at \item to use in [overlay]

In my beamer presentation I would like to reference an item by pointing an arrow on it's number. However, I don't know how to make \item a TikZ node. Otherwise it works well. \documentclass{beamer} ...
3
votes
1answer
173 views

Circling/framing and referring to a bunch of nodes

The end goal: drawing paths between nodes like in the example there but the difference is the nodes are inside a picture here and in particular, the other node is a bunch of nodes in the same picture. ...
7
votes
2answers
2k views

Uncover segments of a TikZ path in Beamer

I have a question about uncovering segments of a TikZ path in Beamer? As a simple example, consider the following path made up of a horizontal and a vertical segment. \begin{tikzpicture} ...
6
votes
1answer
457 views

Tikz overlay for subfigure environment- beamer

I have been trying to create a list and a bunch of subfigures (both on each half of the slide). I have used \setbeamercovered{transparent}to progress along the list per keystroke. I want this ...
6
votes
1answer
513 views

Why do Beamer action specifications for TikZ nodes not behave like \uncover?

NB. I have completely rewritten this question to hopefully clarify things. Executive Summary When creating TikZ diagrams in Beamer, one can add overlay specifications to paths and nodes, as in ...
7
votes
1answer
378 views

Addressing overlay specifications in TikZ-pictures

I was creating a mindmap for a presentation using as reference tikzpicture in beamer. My code is: \documentclass{beamer} \usepackage{lmodern} \usetheme{Copenhagen} \usepackage{tikz} ...
2
votes
1answer
684 views

Tikz overlay with subfig, axis & externalize

I am trying to draw lines between two different tikz-drawings, placed in subfig-environments, for example the corners of the small blue rectangle in the left image and the corners of the axis ...
4
votes
1answer
447 views

Keep a fragmented tikz image at the same place on a beamer slide [duplicate]

Possible Duplicate: How can I fix jumping TikZ pictures in beamer? I am putting together a series of slides using beamer, and I'm using tike to do most of the figures. On one particular ...
5
votes
1answer
393 views

Overprint environment inside tikz node: unexpected alignment of content

I want to use an overprint environment inside a tikz-node. I expect the content text of the overprint-sections to be aligned centrally, but it aligns right and even protrudes a little beyond the ...
7
votes
1answer
521 views

Repeat scaled version of slide, \savebox and \usebox in multi-slide frame?

I have a frame where I uncover a tikz-diagram in 12 slides. In the next frame, I want to repeat a scaled-down version of the full diagram (slide 12). I've tried to use a combination of \savebox, ...
7
votes
3answers
938 views

Splitting a beamer animation

I have a complex animation that evolves over a series of slides (a \foreach \frm in {1,...,12}\only<\frm>{ loop where certain parts are selected on individual slides with \visible). So far I ...
7
votes
1answer
629 views

How can I use overlays in beamer when producing graphs with dot?

I usually describe graphs with graphiz and I enjoy dot2tex which produces the corresponding TikZ code. To explain an algorithm in a presentation, I need to uncover the nodes and edges of a graph step ...
3
votes
1answer
3k views

tikz and beamer overlays. How to avoid repositioning of images?

I want to slowly uncover nodes in a tree. however when I use overlays the resulting image will jump around in the slides. how do I get rid of that? \documentclass{beamer} \usepackage{tikz} ...
3
votes
1answer
1k views

Using beamer overlays to set different styles in TikZ [duplicate]

Possible Duplicate: How to make beamer overlays with Tikz node I'd like to draw a figure in TikZ for a beamer presentation, and color various nodes differently in different overlays of the ...
8
votes
2answers
217 views

Specify which picture variant to show

Inside a frame I am including a .tex file containing a TikZ picture with several overlay specifications such that they result in 9 variants of the same picture, that is, that frame has 9 slides. ...
30
votes
2answers
831 views

An Example from the Microtype Documentation

While exploring the depths of the microtype package with regard to LuaTeX I came across this innocent looking page 18 from the microtype.pdf 2.5 beta-08. As the blue note in the margins hints a ...
11
votes
2answers
2k views

TikZ picture on the entire frame in beamer without using overlays

I have a beamer presentation with several TikZ diagrams that spread across the entire frame, i.e., use the full screen size. I am using the overlay option to make sure the picture captures the entire ...
3
votes
1answer
673 views

tikz spy with beamer overprint

In my presentation, I want to successively highlight different parts of my image using the TikZ spy library. Due to size constraints, the actual highlight is outside of the included image. Therefore, ...
22
votes
1answer
5k views

Simplest way to overlay a text + rectangle label an image?

For my figures thus far I've been using LaTeX's straightforward figure code, i.e.: \begin{figure} \centering \includegraphics[width=6.5in]{figure.png} \caption[Stuff here]{(A) More stuff ...
4
votes
1answer
952 views

Tikz overlay picture over the frame title in Beamer

I am trying to put a tikz overlay picture - A nice, thick red 'X' over a word - On the frame title of a Beamer frame. However, the overlay tikz picture in the frame does not recognize the nodes given ...
11
votes
1answer
764 views

Draw Pareto chart with pgfplots?

I've been following the pgfplots documentation to make some basic bar charts, mostly following this example: \begin{tikzpicture} \begin{axis}[ ybar, ymin=0, width=12cm, height=3.5cm, ...
13
votes
2answers
4k views

Installing background and foreground page layers with TikZ

Several times I discovered the need to draw TikZ material behind and on top of the page text (How to draw text-anchored tikz line below text instead of above?, Test if a paragraph has a page break in ...
12
votes
3answers
10k views

Beamer vs. TikZ: uncover nodes step-by-step

I'm trying to uncover a TikZ image piece-by-piece like so: \documentclass{beamer} \usepackage{tikz} \usetikzlibrary{positioning} \begin{document} \begin{frame}{Linearity} \begin{center} ...
15
votes
3answers
6k views

In a beamer slide highlight a region of an image with a rectangle overlay

I have a slide with a figure in it. I want to draw a rounded corner rectangle overtop part of a figure to highlight that section. Bonus points if you can draw two rounded rectangles as overlays ...