{overlays} is a term used by the {beamer} document class to describe the layering of slides.

learn more… | top users | synonyms (1)

1
vote
1answer
124 views

How can I fix the problem of \ref command when I have been used overlays in beamer

How can I fix the problem of \ref command when I have been used overlays in beamer? This problem appears to me when I use overlays. Here is an example \documentclass[notes=show,12pt]{beamer} \...
1
vote
1answer
47 views

Beamer Overlay for the “description” of the “item label”

\documentclass{beamer} \usetheme{Warsaw} \usecolortheme{crane} \setbeamercolor{frametitle}{bg=gray!10!white} \usefonttheme{professionalfonts} %\setbeamertemplate{headline}{} %remove navigation \...
1
vote
1answer
152 views

Beamer fix position on frames when unsing only

I would like to introduce the points of an itemize one by one and present an example in an block below the itemize (for some items). Using \only that's not really a problem - but the positions are not ...
1
vote
1answer
318 views

How to overlay a call-out box on text? [duplicate]

I wish to achieve following. There may be many variant of this.
1
vote
1answer
388 views

Overlay subfigure caption with TikZ

I'm trying to place my figure captions on top of the figures. I've found some code that does this and I can get it to work for a normal figure - e.g. I can overlay "Figure 1" on top of the figure. ...
1
vote
1answer
523 views

Selecting specific slides for handout?

Consider the following MWE: \documentclass{beamer} \begin{document} \begin{frame} \scriptsize \begin{enumerate} \item<+-> \item<2,3,5,7,11> \item<2,4,6,8,10,...
1
vote
1answer
1k views

How to make captionof appear just in one slide in Beamer

I am trying to create an overlay of two pictures in Beamer. The first one has a caption and the second one doesn't. I tried using \captionof but the caption keeps appearing on the second slide. \...
1
vote
1answer
3k views

Using AtBeginSection and againframe to make custom section transitions

I am trying to make a custom slide to use as an inter-sectional slide in order to replace the more typical code: \AtBeginSection{ \begin{frame}[c,plain,noframenumbering] \frametitle{...
1
vote
1answer
34 views

tikz overlay relative to equation

What would be the easiest way of overlaying tikz output on environments other than a page? At the top of the code below is an example that puts some tikz output at a specific place on the page. ...
1
vote
1answer
31 views

Replacing text in table via overlay causes table to move: beamer

I am using beamer and trying to change a word in a table via overlays. So, "constant" should appear on some slides and "non-constant" should appear on other slides---both in the same box. (This same ...
1
vote
1answer
36 views

Stepwise show `\footfullcite`

The following Q&A is based on an answer I wanted to give for How to change color of a single citation in a given beamer frame?, but since a radical edit of the question, my answer does no longer ...
1
vote
2answers
73 views

Problems with TikZ overlay in table with varios subfigures

I am trying to overlay a TikZpicture over my table and would like it to look like this: My code is the following \documentclass{scrreprt} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \...
1
vote
1answer
159 views

Avoiding jumps when using beamer overlays

I have the following piece of code in a beamer slide to put the curly brackets under the equation on the second slide: \begin{equation*} a = \alt<1>{b+c+d}{\underbrace{b+c+d}_{\text{some ...
1
vote
1answer
67 views

Overlap texts or pictures at specific positions above an array

I have a frame which contains a piece of code: \documentclass{beamer} \usetheme{Boadilla} \usepackage[frenchb]{babel} \begin{document} \begin{frame}{title} \begin{array}{l} int v \\ v ...
1
vote
1answer
103 views

Beamer index showing too many titles with overlays

I'm trying to create my first presentation with the beamer class. I saw that is possible to change the color (for example) of a part of text with overlays. I'm using {\alert{<...>}{text}} to ...
1
vote
1answer
48 views

Uncover and cover

I have the following problem. I was trying to use the uncover command within an equation in my presentation. Is there any command which can do the opposite? I try to explain my self better. Suppose I ...
1
vote
1answer
202 views

Position of labels as updated in a beamer slide tikz block

I am having trouble with updating labels of tikz blocks in a beamer presentation. So far I have been using \onslide to update the block size and location from code in this answer. For the label text, \...
1
vote
1answer
124 views

Centered text moves between slides using \only

I'm trying to get text (well, actually images, but my example uses text) to line up exactly between slides, such that you don't see them shift when advancing. In this example the text is not ...
1
vote
2answers
111 views

\pause not working after “overprint” environment

In the following example, in the pdf I want to pause at the mentioned place. Any solution will be helpful. Thanks \documentclass[xcolor=dvipsnames]{beamer} \usepackage[latin1]{inputenc} \usepackage{...
1
vote
2answers
97 views

Specify which overlays to take from another file

I have a picture with overlays in an external file. Sometimes I want to use all overlays from the picture, sometimes only some of the overlays. Consider the following example, where the picture is ...
1
vote
1answer
180 views

Text with overlay is vertically displaced in beamer

Consider the following MWE: \documentclass{beamer} \begin{document} \begin{frame} \frametitle{Displacement of text} \only<1-2>{This text will be displaced.} \only<2>{Did you see it?} ...
1
vote
1answer
1k views

How to let an overlayarea appear in the beamer mode?

I basically have the following code for one frame \subsection{} \begin{frame}{VERY INTELLIGENT FRAME TITLE} \begin{columns} \begin{column}{.5\textwidth} \centering \includegraphics<1->[scale=....
1
vote
2answers
168 views

beamer overlays and table rules

I am trying to use \only{...} within a table to selectively add blocks of lines. This works as long as I don't have a \midrule or \bottomrule included or following the part contained in \only{...}. ...
1
vote
3answers
192 views

Saving a non-animated version of animated beamer/fancyslides slides

I'm new to LaTeX so I don't even know how to phrase my question to search for it! I am making lecture slides for a course. I use \pause before pretty much every bullet point so we can go over each ...
1
vote
1answer
236 views

Inconsistent column placement in beamer slides with overlay

I'm trying to show alternative column configurations on a beamer slide, as shown in this example: \documentclass{beamer} \usepackage{tikz} \begin{document} \begin{frame} \begin{columns} \...
1
vote
1answer
2k views

beamer block inside an itemize environment with overlays

I have a frame like this, there is a block inside the itemize environment, and there is an overlay : \begin{frame} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \frametitle{Comparing two Gaussian means: ...
1
vote
2answers
400 views

Beamer: Reuse incremental overlay number from list item?

I'm using an item list with the overlay specification <+(1)->. For one of the items, I want a text after the item list to be uncovered simultaneously with the item. How can I achieve that? \...
1
vote
1answer
853 views

Multicolumn doesn't work well with onslide

I have the following code which works without error: \documentclass{beamer} \usetheme{Boadilla} \usepackage[frenchb]{babel} \begin{document} \begin{frame} \begin{tabular}{ll|ll} \onslide<1->{...
1
vote
2answers
1k views

Changing elements of arrays in Beamer without shifting the unchanging elements.

An array is to be displayed in a Beamer presentation with some elements constant across all slides in the frame. Other array elements, however, must change with the overlay in the frame and are of non-...
1
vote
0answers
27 views

Two different listings at the same time

I would like to show two different pieces of listings at the same time in a slide. With the following code the second listing only shows up at the end, while I would like it to alongside with the line ...
1
vote
0answers
18 views

beamer handout alert: difference between itemize and simple alert

In a previous question I asked about removing the \alert overlay from handout version of a beamer presentation. It turns out, that using \begin{itemize}[<+(1)-| alert@+(1)>] or from previous ...
1
vote
1answer
47 views

How to create invisible item in Beamer Overlays case by case?

Please allow me to explain my situation. I am using Beamer overlay for a quiz. (And I love the pdf output). So, I give the students multiple choices on first slide. And next slide they get the answer. ...
1
vote
0answers
69 views

Autoscroll multipage figures, avoid jumps in overlays

I have a multipage pdf image and I want to put it into a beamer slide with an itemize environment in overlay. I want the page of the pdf image to automatically scroll each time an item appears. In ...
1
vote
0answers
25 views

Using \only and shifting to the right

I want to use overlay in this case: \documentclass{beamer} \usepackage{amsmath,enumerate,amssymb} \begin{document} \begin{frame}{Is this a fraction or a ratio?} \centering \resizebox{0.8\...
1
vote
0answers
57 views

Using pgfkeys inside overlay specification

I would like to use labels to assign overlay specifications. Below is the code I have so far. My main question is why does not the following terminate to compile. \documentclass[11pt]{beamer} \...
1
vote
0answers
25 views

Beamer : how to avoid the lack of access to labelled slide (not frame) numbers? [duplicate]

In this animation, I need to access to the number of some labelled slides (not frames) to use this numbers in overlay specification. As far as I know it is not possible What then should be the good ...
1
vote
1answer
145 views

Beamer: sub-itemize visibility linked to previous item

Suppose I have a list where I want the item just before a sub-list to disappear somewhere during the uncovering of the sub-list. See example: \documentclass{beamer} \begin{document} \begin{frame} ...
1
vote
0answers
55 views

Animating letters in an already animated cell (of a table)

I am a newbie to beamer. I want to animate some cells (the corner cells) of my table to become blue during a presentation. I then want some letters in those cells to be animated to green. Can someone ...
1
vote
1answer
108 views

Beamer overlays with tikz nodes break verbatim whitespace handling

I can't get any of the verbatim environments (alltt, semiverbatim) to respect white space as soon as I place it in an overlay macro: \documentclass{beamer} \begin{document} \begin{frame}[fragile] \...
1
vote
0answers
31 views

Reserving space in beamer overlays [duplicate]

I use the beamer package. I want to achieve the following. Assume I have a slide of the following form (two elements): XXX YYY XXX should be shown on all slides and always at the same position! YYY ...
1
vote
0answers
47 views

Dummy macro for ignoring beamer overlay

I would like a dummy macro that ignores overlay specification (from beamer) when the code is copy-pasted into another class. \documentclass{article} \usepackage{fontspec} \newcommand{\onslide}[1]{} \...
1
vote
0answers
211 views

How to have text overlay top and bottom of image with fade at top and bottom?

How can I make the text in my letter just slightly overlay the top and bottom of a centered, margin-to-margin image within my document. The image is faded at the top and bottom so that the image is ...
1
vote
0answers
409 views

Exclude section from handouts

I want to exclude a whole section of my beamer presentation in the handout version. Frames and content can be hidden using the overlay specifier <handout:0>. But how do I hide the \section to ...
1
vote
1answer
256 views

How to remove a frame from the total number of frames? [duplicate]

I'm using Warsaw as outer theme. I use some images in different slides to create an effect of 'image in evolution' but the problem is that I don't want that the number of slides increase with every ...
1
vote
0answers
158 views

beamer: suppress frames in handout mode gives spurios inclusion

While making lecture slides with XeTeX & beamer I stumbled across a problem with the exclusion of certain slides in handout mode. Since this appears to be spurious I have difficulties in ...
1
vote
0answers
45 views

Handout is not the same as last displayed state of a frame [duplicate]

Possible Duplicate: How to exclude certain slides from handout OK. Here is the MWE that explains it all. When compiled as beamer (onscreen) option, the itemized items appear on every click. ...
1
vote
0answers
918 views

Overlaying in Beamer — Setting the text on each overlay to be in the same spot when each overlay has some different text [closed]

I am trying to create a slide in beamer that has four overlays. There are four sections to the slide. On each overlay, each subsequent section of the slide appears and along with additional ...
0
votes
1answer
56 views

How can I use \pause for each level in beamer presentation to appear sequentially?

\documentclass[tikz,border=10pt]{standalone} \usepackage{pgfplots} \usepackage{forest} \usetikzlibrary{shadows} \begin{document} \begin{forest} shade me/.style={% bottom color=#1!25, ...
0
votes
1answer
206 views

Changing code in listings dynamically [closed]

I need to change dynamically the code in the listing by adding just one key word to the code. I tried to do it like this: \begin{lstlisting}[escapechar=|] class MyThread extends Thread { private |...
0
votes
1answer
142 views

Tikz nodes moves after double building

I want to plot 4 graphs in one tikzpicture in a 2x2 grid, using groupplot. Also I want to put some arrows from nodes in the first three plots to nodes in the last one. To do this, I try to use ...