{overlays} is a term used by the {beamer} document class to describe the layering of slides.

learn more… | top users | synonyms (1)

0
votes
1answer
72 views

Invisible graphics with dynamic text in beamer

I want to use two different options for setbeamercovered{} in my presentation - dynamic for text and invisible for images. Is there any way to do this?
1
vote
1answer
19 views

Maintain position of item in beamer

I'd like to have a slide in a beamer presentation like this, but with two little differences: 1) the items have to be in the same point and not go away in the frame. For this I tried to use ...
0
votes
0answers
27 views

Image only appear when clicking

I'm new to latex. I'm building a presentation slides, and I need to show some images only when clicking (or pressing right arrow) I've tried both of the following ways mentioned in other questions, ...
8
votes
1answer
2k views

symbol for proper ideal (\unlhd + \lneq)

How can I write the symbol for a proper ideal? The standard relations \leq,\subseteq both have a "proper" version \lneq,\subsetneq, but I was unable to find a "proper" version of either \unlhd ...
1
vote
1answer
34 views

tikz overlay relative to equation

What would be the easiest way of overlaying tikz output on environments other than a page? At the top of the code below is an example that puts some tikz output at a specific place on the page. ...
2
votes
1answer
51 views

commutative diagram with pause in beamer

I have two questions: Is it possible to add \pause command on commutative diagram, I want to show every arrow when I speak. How can I change arrows directions, for instance I want $A \leftarrow B$. ...
1
vote
1answer
39 views

Beamer two column overlay display aligned equations right column first then left

I am trying to setup an overlay for a frame where I would like to display the list of equations inside aligned env inside the right column first, followed by list of equations inside aligned env ...
3
votes
2answers
34 views

Local scope for beamer overlay specifications?

Suppose you have a large and complex piece of code that, for instance, draws part-by-part a TikZ picture in a beamer frame, with complex overlay and action specifications. Suppose also that the code ...
0
votes
0answers
17 views

XeLaTeX Beamer and minted, some characters are invisible [duplicate]

fibonacci.tex: \documentclass[xcolor={dvipsnames,svgnames}]{beamer} \usepackage{pgfpages} \setbeameroption{show notes} \setbeameroption{show notes on second screen=right} \usepackage{minted} \...
1
vote
0answers
29 views

Two different listings at the same time

I would like to show two different pieces of listings at the same time in a slide. With the following code the second listing only shows up at the end, while I would like it to alongside with the line ...
45
votes
2answers
15k views

How to make beamer overlays with Tikz node

I have a diagram of 4 nodes in my beamer slide. \begin{figure}[h] \begin{centering} \begin{tikzpicture}[system/.style={draw,rectangle,rounded corners=3,minimum width=2cm,text width=1.8cm,text ...
3
votes
0answers
44 views

Need help in understanding answer to “how-to-make-beamer-overlays-with-tikz-node”? [closed]

Can someone explain this code. How to make beamer overlays with Tikz node. In particular I need to know Why do we get three copies of a given slide. If I need to make more than two copies, what ...
2
votes
0answers
24 views

Table with colored cells using dcolumn and overlays

I found the very helpful question on how to add colors in a table using dcolumn here Colored text with dcolumn, but I would like to do the same thing using overlay such that the color only appears on ...
0
votes
0answers
44 views

How to set the overlay in this KOMA-Script Presentation?

The following is the template which I am using for my presentation. According to this link, This template did not come with overlays. And I want to set some overlays for my presentation, since it is ...
1
vote
1answer
31 views

Replacing text in table via overlay causes table to move: beamer

I am using beamer and trying to change a word in a table via overlays. So, "constant" should appear on some slides and "non-constant" should appear on other slides---both in the same box. (This same ...
0
votes
1answer
57 views

How can I use \pause for each level in beamer presentation to appear sequentially?

\documentclass[tikz,border=10pt]{standalone} \usepackage{pgfplots} \usepackage{forest} \usetikzlibrary{shadows} \begin{document} \begin{forest} shade me/.style={% bottom color=#1!25, ...
4
votes
1answer
61 views

Overlays in beamer : itemize items from different colors

I have a problem with Beamer. I'm trying do use lists with items of different colors, appearing once at a time. Here's my MWE : \documentclass{beamer} \usetheme{Warsaw} \newcommand\coloreditem[1]{\...
2
votes
1answer
40 views

Overlays in grammar rules

I'd like to use Beamer overlays inside a grammar definition: \documentclass{beamer} \usepackage{syntax} \begin{document} \begin{frame}[fragile]{} \begin{grammar} <term> ::= <term1&...
2
votes
2answers
57 views

beamer, overlay moves the text above it

in a presentation i would like to use some overlays but for some reason one overlay moves everything above it. Here is an example. When you run it in presentation mode (full screen) you can see the ...
13
votes
3answers
6k views

Adding color to a table column as a beamer overlay

I'm trying to have an overlay that adds a background color to a column of a table in beamer. I can create a table with a colored second column using the colortbl package. \begin{tabular}[]{r >{\...
7
votes
1answer
80 views

Orbital shift when i use atoms near it

I'm drawing some orbitals and I noticed that when I have an atom near the orbital, the orbital shifts down a little (it's very ugly). This happens only if I put the hydrogen at the beginning of the ...
4
votes
1answer
37 views

beamer handout without alerts

I have a slide, that uses \pause and \alert, to successively uncover what I am talking about. Since the non-handout version is a bit long I'll just link it. Works superb. But going into handout mode ...
1
vote
0answers
18 views

beamer handout alert: difference between itemize and simple alert

In a previous question I asked about removing the \alert overlay from handout version of a beamer presentation. It turns out, that using \begin{itemize}[<+(1)-| alert@+(1)>] or from previous ...
3
votes
1answer
68 views

Chemical Scheme with tikz-visible wobbles

I encountered a problem when using chemfig-schemes inside of a tikzpicture and the visible-tikzset. The chemical structures wobble upwards, but only on the second slide; every slide after that stays ...
3
votes
1answer
24 views

Listing with overlay only next to content not to title

I got this listing with a gray bar on the left side with line numbers in it. I want it not to be showen next to the title. Here is my code: \usepackage{listings} \usepackage[many]{tcolorbox} \...
2
votes
1answer
41 views

hf-tikz and references edges: draw in background?

I have managed to draw this thing, which I find quite nice (sorry if it's not so minimal, but I tried to reduce it and having the same problem but it was a bit of a mess...): \documentclass[11pt]{...
2
votes
1answer
59 views

tikz overlay changes width of resizebox

I have a beamer frame with a large matrix. I want to add some annotations to it, for which I use tikz overlays. However, the matrix (I suppose that it is the resizebox, actually) changes its width ...
3
votes
2answers
66 views

beamer to show nested-subitem when all (non-nested) items covered

I am trying to get an alternating highlighting effect between \itemize items and subitems (which are just nested itemize items), but there is an issue in that when all of the non-nested items are ...
0
votes
0answers
22 views

Replacing table cell during overlay and retaining position [duplicate]

I have the following slide and I would like the left side of the arrow to be displayed as a question mark during the first overlay slide and only after a click to the second slide to have the question ...
1
vote
1answer
47 views

How to create invisible item in Beamer Overlays case by case?

Please allow me to explain my situation. I am using Beamer overlay for a quiz. (And I love the pdf output). So, I give the students multiple choices on first slide. And next slide they get the answer. ...
2
votes
1answer
103 views

Signature over printed name in a `moderncv` letter

When trying to get the signature (transparent PNG) properly placed using the following code: \name{Andrés}{BC} \closing{\color{red}Atentamente,\\ \vspace{-10pt}\parbox{120pt}% {\includegraphics[width=...
2
votes
1answer
71 views

How can I fade slide contents and overlay a single bullit point at the end of a Beamer slide?

I need to create a visual effect in Beamer wherein the content of a slide is "greyed out" (or covered with a while translucent box), and a single emphasized bullet point is presented over the slide ...
3
votes
1answer
5k views

Overlaying with beamer, combining blocks and graphics

I'm trying to combine graphics and blocks on a slide. Here is my code, i think it's quite simple to figure out what i want from it : \begin{frame} \frametitle{Outils} \onslide<1->\begin{block}{...
3
votes
2answers
79 views

using tikzmark subnode with overlays beamer

I am trying to create a slide with overlays in beamer using tikzmark. I currently have \documentclass{beamer} \usepackage{amsmath} \usepackage{tikz} \usetikzlibrary{arrows, shapes, calc, ...
1
vote
1answer
40 views

Stepwise show `\footfullcite`

The following Q&A is based on an answer I wanted to give for How to change color of a single citation in a given beamer frame?, but since a radical edit of the question, my answer does no longer ...
2
votes
1answer
44 views

Highlight the item in list after uncovering it

\documentclass[xcolor=table ]{beamer} \usepackage[english]{babel} \usepackage[utf8x]{inputenc} \title[Your Short Title]{Your Presentation} \author{You} \institute{Where You're From} \date{Date of ...
1
vote
1answer
47 views

Beamer Overlay for the “description” of the “item label”

\documentclass{beamer} \usetheme{Warsaw} \usecolortheme{crane} \setbeamercolor{frametitle}{bg=gray!10!white} \usefonttheme{professionalfonts} %\setbeamertemplate{headline}{} %remove navigation \...
0
votes
0answers
53 views

Fixing equation spacing between content changes

I have a large equation in beamer with a double sum, and I want to change the summation range (among other elements in the equation) using \only. But of course when the contents of the \substack ...
3
votes
2answers
4k views

How can I replace a box of text with beamer?

I currently have this piece of text for a quiz: \begin{frame}{Quiz} \begin{block}{Frage} With generics the compiler has more information about the types of the objects, so ...
2
votes
1answer
34 views

Step through a list in Beamer at a sub-item level

I am trying to show a list piece by piece. I know that you can use \begin{itemize}[<+->] to make items appear one-by-one. However, how do you control smaller parts of each item, to make them ...
8
votes
3answers
3k views

verbatim and overlays

I am trying to display a verbatim environment in an overlay. I have the following code but it is giving errors: \only<2->{ \begin{verbatim} Select T3.Subject From T as T1, T as T2, T as T3 ...
3
votes
1answer
83 views

beamer, overlay in allt or fancyvrb

I'd like to highlight some text inside an alltt or verbatim or Verbatim (or whatever environment/package that would produce what I want) on some slides. So, I create a newcommand<> that does the ...
0
votes
1answer
48 views

Selective overlay option of textblock with the textpos package

The texpos package has an option called [overlay] that, when loading the package makes all the text boxes textblocks be above (obscuring) other elements of the page. Is there a way to control whether ...
1
vote
1answer
154 views

Beamer fix position on frames when unsing only

I would like to introduce the points of an itemize one by one and present an example in an block below the itemize (for some items). Using \only that's not really a problem - but the positions are not ...
3
votes
1answer
255 views

How to change the behavior of user-defined environments using overlays?

first I have to give a link to a related question+answer. I am trying to create a beamer presentation and defined an environment. The environment has an optional parameter and I want that beamer sets ...
10
votes
2answers
2k views

Footnotes disappear when using overlays in beamer

I use footnotes for citations in combination with the beamer package. I adapted the code from this question and everything works quice nicely - except when using overlays. Then the footnotes only show ...
23
votes
5answers
1k views

How can I make a perfect page grid that fits my page for measuring purposes in TikZ?

Question How can I get my grid lines to line up perfectly such that they correspond to the physical millimeters on the page. Situation I have a sheet of A4 paper. I want to draw grid lines on it ...
1
vote
0answers
70 views

Autoscroll multipage figures, avoid jumps in overlays

I have a multipage pdf image and I want to put it into a beamer slide with an itemize environment in overlay. I want the page of the pdf image to automatically scroll each time an item appears. In ...
1
vote
1answer
162 views

Avoiding jumps when using beamer overlays

I have the following piece of code in a beamer slide to put the curly brackets under the equation on the second slide: \begin{equation*} a = \alt<1>{b+c+d}{\underbrace{b+c+d}_{\text{some ...
2
votes
1answer
98 views

Beamer only and visible

\begin{frame}{Convex polygon \& concave polygon} \begin{definition} A \textbf{convex} polygon has all its diagonals inside the polygon. \\ A \textbf{concave} polygon has at ...