{page-breaking} is about how (La)TeX breaks pages (and, in multi-column documents, columns) and how page/column breaking can be influenced.

learn more… | top users | synonyms (1)

10
votes
1answer
169 views

prevent break after \poemtitle

This MWE shows that LaTeX can put a break after the title of a poem (written with the \poemtitle command of the verse package). Can someone advice me a way to prevent this behaviour? ...
10
votes
1answer
5k views

Proofs in Beamer

I'm writing a presentation in Beamer, where I present proofs which are longer than one frame. How to make Beamer to break it automatically to another frame? If it is not possible how am I supposed to ...
10
votes
2answers
873 views

Section should automatically start new page if the whole section does not fit on current page

I would like my sections to start on a new page if they do not fit on the current page. In other words: if a section fits on the current page print it, if it does not fit start printing it on the ...
10
votes
1answer
326 views

When is \if@nobreak set to \iftrue or \iffalse?

In my answer to a question on page breaking, I used a private switch that the user had to set by hand to prevent tables which start just after a section from breaking (at the first line). It seems ...
10
votes
2answers
311 views

Bottom frame of listing appears on top of the next page

As the title says. I use, among other things, the following in my lstset: framerule=1pt, frame=tblr Some places a page break happens in the middle of my \lstlisting. Fine. But sometimes the whole ...
10
votes
2answers
1k views

Automatic way to break narrow tables into two columns?

Is there an easy way to break long narrow tables into two (or possibly more) columns (i.e. without manually rearranging the columns)? In the following example you can see that there is a lot of ...
10
votes
1answer
202 views

mdframed: how to prevent a box from splitting if the remaining content (or the initial content) is too small?

Question I would like to prevent mdframed to split a box too early or too late. By this, I mean that I would like the remaining part of the box to always be greater than a fixed length, given before. ...
10
votes
1answer
123 views

Insert empty pages until certain page number

I have sections which have to start exactly at the predefined page numbers and the potentially unfilled pages between these sections should be filled with empty pages. Is there a for-loop available ...
10
votes
1answer
208 views

How to have the mdframed material flow in the top part of consecutive pages

Suppose you have the following layout: The gray area represents normal text. The orange area consists of one or more text boxes (inserts) of given height. Some textbook layouts present advanced or ...
10
votes
1answer
2k views

Beamer: allowframebreaks collides with columns?

I'm doing a scientific presentation with the beamer package and have two columns (the left one with text, the right one with several images) that are too long for one frame. I want to use ...
10
votes
1answer
561 views

Using mdframed after a section heading

The following is a very contrived example, but it illustrates a problem I am unable to solve with the mdframed package. When the mdframed environment follows a section heading but there is ...
10
votes
1answer
209 views

Putting marks for split footnotes

Say, that you have a footnote which is printed in page 1 and 2. How can you put a mark, say $\rightarrow$ at the end of the footnote text in page 1 and at the start of the footnote text on page 2, ...
10
votes
2answers
190 views

\paragraphfootnotes with text colour

I am having some trouble with my footnotes becoming coloured in certain situations. In particular, I am wanting to use memoir's \paragraphfootnotes, but all the footnotes for a page become coloured if ...
10
votes
1answer
527 views

mdframed does not split correctly between pages

I use mdframed to make boxes and split them across pages. However, sometimes mdframed splits! very strangly across the pages. In this example he prefers splitting, while there is enough space to put ...
10
votes
1answer
2k views

Where to place a two-page table of contents / list of figures?

In my Master's thesis, I use scrbook and start every chapter on odd pages. Now both my table of contents and list of figures span exactly two pages. My question is therefore more related to style and ...
10
votes
3answers
5k views

How can I create a two-column layout with different widths (and texts) for the two columns?

I want to create a document in which there are two separate columns of content. The column on the left is normal text, with sections, environments, etc. The column on the right is figures, all roughly ...
9
votes
2answers
1k views

QED symbol on the same page as proof

I'm using the proof environment from the amsthm package. In some cases, the last line of a proof falls at the end of a page, but the QED symbol (the little white box) ends up on the following page. ...
9
votes
2answers
2k views

Multicol - don't wrap

I have two-columned page by multicol: \begin{multicols}{2} Lorem ipsum dolor sit amet... \end{multicols} It there any way to ban wrapping to the second column. What I mean is, that I ...
9
votes
2answers
1k views

\nopagebreak and \penalty

What is the difference between \nopagebreak and \penalty? (Other than the obvious fact that their arguments are measured on different scales.) When should one use one, and when the other?
9
votes
3answers
2k views

Proper way to change a font temporarily with fontspec

I have been using fontspec in a lualatex document where as instructed by the manual I set my main/sans/mono font in my preamble with some default features. However at some point I wish to temporarily ...
9
votes
2answers
2k views

How can I force bibliography items not to be split across pages? [duplicate]

Possible Duplicate: How can I prevent page break between lines of a paragraph or bibliography entry? \documentclass{mwrep} \usepackage[nodisplayskipstretch]{setspace} \setstretch{1.9} ...
9
votes
2answers
6k views

To have no pagebreak before Bibliography

The position of Bibliography section is defined by document class, report class is a new page, some articles class no has page break. How change this witout change the class of the document? So i ...
9
votes
2answers
6k views

Forcing a figure to appear on the next page

I have a figure which takes up an entire page of space. When I use \includegraphics to put it in my document, instead of appearing on the next page, it appears at the end of the section. However, I ...
9
votes
2answers
5k views

Minipage that allows page breaks?

Is there a minipage-like environment that allows pagebreaks? Everything I can find is about avoiding page breaks (which minipage does well) but I want to indent a whole section, which is convenient to ...
9
votes
1answer
25k views

Explicit frame break with beamer class

I am looking for a way to insert explicit frame breaks. I'd like to use the built-in frame title continuation feature. The only way I have found is to play with different values of the ...
9
votes
2answers
354 views

Lettrine and section at bottom of page causes bad pagebreak

My custom lettrine and section causes some of my pagebreaks to ruin my layout. Please see the example of the output for the attached code run through XeLaTeX. Verse 2 on the next page should ...
9
votes
3answers
3k views

Page breaks within moderncv

I'm typesetting a document with lengthy itemize lists and in most cases LaTeX leaves lots of empty space before the environment in order to get it entirely on one page. How can I encourage LaTeX to ...
9
votes
2answers
636 views

Adding a chapter title for indices (multind) on the same page as the first index is printed

I am trying to add a chapter title 'Indices' before the first multind index is printed. However, printindex flushes the page so if I do it, I will get the title, rest of the page empty, and the first ...
9
votes
2answers
543 views

Automatically reorder floats to fill page

I have a document consisting only of floats, and I would like to order them so as to use the least number of pages. In my case, each float contains song lyrics, but they could easily be poems or code ...
9
votes
1answer
559 views

Inserting 'PTO' (please turn over)

Is there a way to create a command which is like a \pagebreak (in that it suggests that it might be a good place to break a page, but certainly doesn't enforce it) but which inserts 'PTO' ("please ...
9
votes
2answers
4k views

placing in the same page two abstract in different language

I'd place in the same page two abstract section.One created using my own language and one in english language. If I tried this: \selectlanguage{italian} \begin{abstract} \lipsum[1] \end{abstract} ...
9
votes
1answer
755 views

Excursus environment using mdframed: Issue with page breaks

This question is a follow-up question to: Access mdframed node coordinates with TikZ? @MarcoDaniel: Awesome package (mdframed)! Nice clean code, too. @Tobi: I really like your new excursus ...
9
votes
1answer
1k views

mdframed : Bug with page break? [closed]

I'm trying to use the package mdframed to handle framed boxes, that allow page breaking when the content of the box is too large. Nevertheless, i encounter the following difficulty : ...
9
votes
1answer
1k views

Full-page figure without extraneous whitespace in text?

My question is along the lines of How do I ensure that figures appear in the section they're associated with?, but slightly different. I have a figure that occupies a full page. By default, LaTeX ...
9
votes
1answer
235 views

Bad page break with \newenvironment, \refstepcounter and hyperref

I tried to define some environment but came across bad page breaks sometimes. The minimal working example is as follows: \documentclass[b5paper]{article} \usepackage{hyperref} % page break is correct ...
9
votes
1answer
3k views

Change page layout after first page

currently I'm trying to prepare a letter head with XeLaTeX. The first page of the letter should have a sidebar on the right. For this sidebar, the text width should be shrinked to approx. 80% of its ...
9
votes
1answer
240 views

How can I create a chapter with graphics only divided into different sections?

I'm trying to create a chapter with pictures only, but keep running into troubles. The chapter is an appendix, where only some graphics should be displayed, placed in different sections. I don't need ...
9
votes
1answer
241 views

Break line only if it's too long, but breaking won't create a new page

I'm the author of the contracard package/class for typesetting calling cards for traditional dances. Currently, if you typeset a particularly long figure on a calling card it wraps like this (look at ...
9
votes
2answers
2k views

Adding page breaks to pandoc latex template when converting markdown

Perhaps I'm missing something, but is there a way to either (a) ensure that pandoc places pagebreaks before level 1 and level 2 headers in markdown (#,##), or (b) hide \newpage from other markdown ...
9
votes
2answers
2k views

Preventing page breaks from occurring in bibliography items

Using Bibtex and Natbib, does anyone know how to prevent a pagebreak from occurring mid-item? I would like the bibliography to either: Put an entire record on a given page, or Carry the record ...
9
votes
2answers
393 views

How can I tell LaTeX to only make pagebreaks on new sections?

I'm working on a document where it's important that sections are in the same page. How can I tell LaTeX to only make a page break (if necessary) when I write a new \section without having to manually ...
9
votes
1answer
438 views

How to put footnotes in the page where they belong in a mdframed environment

I have a large bunch of text in a mdframed environment, that span more than one page. As it seems reading the documentation, the mdframed environment put every footnotes at the end of the frame, by ...
9
votes
2answers
870 views

Prevent xtab breaking table too soon

Xtab breaks a long table spanning multiple pages too soon -- see my screenshot: The output seems rather unsightly to me. Can I make it take more of the available space? Alternatively, is there a ...
9
votes
2answers
5k views

Big tables with big items: pagebreaks within items?

I am using LaTeX for creating PDF files automatically from within Python scripts. The documents I create basically consist of just one big table, which can span several pages. It consists of three ...
9
votes
1answer
245 views

Why is mdframed inserting a blank page?

I'm using the awesome mdframed by Marco Daniel and I'm having some problems with pagination. Sometimes it will insert a blank page, depending on the exact height of the content. Here's the smallest ...
9
votes
1answer
170 views

show “continued” for nested description list item on page break

I'm using enumitem to create a description list. These lists can sometimes be nested and can get very long. When a list item with a lot of description text breaks over a page it is difficult to ...
9
votes
4answers
211 views

Widow Orphan lstlisting

I have a listing of 6 lines. The listing box does not seem to fit on one page (it is on the bottom of the page) so the rest of the box is printed on the next page. There is nothing actually in the box ...
9
votes
1answer
258 views

Problems at page boundaries trying to highlight `\lstinline`

I was trying the code given in Colored background in inline listings, which is actually the same than in How to redefine \lstinline to automatically highlight or draw frames around all inline code ...
9
votes
1answer
244 views

Balancing lines in two-column document containing figures

How to balance lines in two-column document that contains figures? In other words - how to set the vertical margins of figure with caption so that the line after the figure corresponds to the line in ...
9
votes
0answers
187 views

Variable page break penalty for odd/even pages?

I am working on a document that has a large number of external Lilypond files included. These render quite well and (while a bit of a pain to use) lilypond-book is smart enough to render the music ...